Struct esp32c3_hal::pulse_control::ConfiguredChannel1

pub struct ConfiguredChannel1 { /* private fields */ }

Wrapper forChannel1 object.

Trait Implementations

impl ConfiguredChannel for ConfiguredChannel1

fn send_pulse_sequence<const N: usize>(
    &mut self,
    repeat_mode: RepeatMode,
    sequence: &[PulseCode; N]
) -> Result<(), TransmissionError>

Send a pulse sequence in a blocking fashion

fn send_pulse_sequence_raw<const N: usize>(
    &mut self,
    repeat_mode: RepeatMode,
    sequence: &[u32; N]
) -> Result<(), TransmissionError>

Send a raw pulse sequence in a blocking fashion

In this function we expect the sequence elements to be already in the correct u32 format that is understood by the RMT. Please refer to the reference manual or use the variant which accepts PulseCode objects instead.

We expect that the end marker is already part of the provided sequence and to be provided in all modes!

fn stop_transmission(&self)

Stop any ongoing (repetitive) transmission

This function needs to be called to stop sending when previously a sequence was sent with RepeatMode::Forever.

impl OutputChannel<ConfiguredChannel1> for Channel1

fn set_idle_output_level(&mut self, level: bool) -> &mut Channel1

Set the logical level that the connected pin is pulled to while the channel is idle

fn set_idle_output(&mut self, state: bool) -> &mut Channel1

Enable/Disable the output while the channel is idle

fn set_channel_divider(&mut self, divider: u8) -> &mut Channel1

Set channel clock divider value

fn set_carrier_modulation(&mut self, state: bool) -> &mut Channel1

Enable/Disable carrier modulation

fn assign_pin<RmtPin>(self, pin: RmtPin) -> ConfiguredChannel1where
    RmtPin: OutputPin,

Assign a pin that should be driven by this channel