Struct esp32c3_hal::pac::spi2::dout_mode::W

pub struct W(_);

Register DOUT_MODE writer

Implementations

impl W

pub fn dout0_mode(
    &mut self
) -> BitWriterRaw<'_, u32, DOUT_MODE_SPEC, bool, BitM, 0>

Bit 0 - The output signal 0 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state.

pub fn dout1_mode(
    &mut self
) -> BitWriterRaw<'_, u32, DOUT_MODE_SPEC, bool, BitM, 1>

Bit 1 - The output signal 1 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state.

pub fn dout2_mode(
    &mut self
) -> BitWriterRaw<'_, u32, DOUT_MODE_SPEC, bool, BitM, 2>

Bit 2 - The output signal 2 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state.

pub fn dout3_mode(
    &mut self
) -> BitWriterRaw<'_, u32, DOUT_MODE_SPEC, bool, BitM, 3>

Bit 3 - The output signal 3 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state.

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<DOUT_MODE_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<DOUT_MODE_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<DOUT_MODE_SPEC>> for W

fn from(writer: W<DOUT_MODE_SPEC>) -> W

Converts to this type from the input type.