Module esp32c3_hal::uart

source ·
Expand description

UART driver

Overview

In embedded system applications, data is required to be transferred in a simple way with minimal system resources. This can be achieved by a Universal Asynchronous Receiver/Transmitter (UART), which flexibly exchanges data with other peripheral devices in full-duplex mode. The UART driver provides an interface to communicate with UART peripherals on ESP chips. It enables serial communication between the microcontroller and external devices using the UART protocol.

Example

let config = Config {
    baudrate: 115200,
    data_bits: DataBits::DataBits8,
    parity: Parity::ParityNone,
    stop_bits: StopBits::STOP1,
};

let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
let pins = TxRxPins::new_tx_rx(
    io.pins.gpio1.into_push_pull_output(),
    io.pins.gpio2.into_floating_input(),
);

let mut serial1 = Uart::new_with_config(
    peripherals.UART1,
    Some(config),
    Some(pins),
    &clocks,
    &mut system.peripheral_clock_control,
);

timer0.start(250u64.millis());

println!("Start");
loop {
    serial1.write(0x42).ok();
    let read = block!(serial1.read());

    match read {
        Ok(read) => println!("Read 0x{:02x}", read),
        Err(err) => println!("Error {:?}", err),
    }

    block!(timer0.wait()).unwrap();
}

Modules

Structs

Enums

  • Error
    Custom serial error type

Traits