Struct esp32c2::spi0::din_mode::R

pub struct R(_);

Register DIN_MODE reader

Implementations

impl R

pub fn din0_mode(&self) -> DIN0_MODE_R

Bits 0:1 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge

pub fn din1_mode(&self) -> DIN1_MODE_R

Bits 2:3 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge

pub fn din2_mode(&self) -> DIN2_MODE_R

Bits 4:5 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge

pub fn din3_mode(&self) -> DIN3_MODE_R

Bits 6:7 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge

Methods from Deref<Target = R<DIN_MODE_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<DIN_MODE_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<DIN_MODE_SPEC>> for R

fn from(reader: R<DIN_MODE_SPEC>) -> Self

Converts to this type from the input type.