1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

#[doc = "Register `DOUT_MODE` reader"]
pub type R = crate::R<DOUT_MODE_SPEC>;
#[doc = "Field `DOUT0_MODE` reader - The output signal 0 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT0_MODE_R = crate::BitReader;
#[doc = "Field `DOUT1_MODE` reader - The output signal 1 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT1_MODE_R = crate::BitReader;
#[doc = "Field `DOUT2_MODE` reader - The output signal 2 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT2_MODE_R = crate::BitReader;
#[doc = "Field `DOUT3_MODE` reader - The output signal 3 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT3_MODE_R = crate::BitReader;
#[doc = "Field `DOUT4_MODE` reader - The output signal 4 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT4_MODE_R = crate::BitReader;
#[doc = "Field `DOUT5_MODE` reader - The output signal 5 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT5_MODE_R = crate::BitReader;
#[doc = "Field `DOUT6_MODE` reader - The output signal 6 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT6_MODE_R = crate::BitReader;
#[doc = "Field `DOUT7_MODE` reader - The output signal 7 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT7_MODE_R = crate::BitReader;
#[doc = "Field `D_DQS_MODE` reader - The output signal SPI_DQS is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type D_DQS_MODE_R = crate::BitReader;
impl R {
    #[doc = "Bit 0 - The output signal 0 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout0_mode(&self) -> DOUT0_MODE_R {
        DOUT0_MODE_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - The output signal 1 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout1_mode(&self) -> DOUT1_MODE_R {
        DOUT1_MODE_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - The output signal 2 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout2_mode(&self) -> DOUT2_MODE_R {
        DOUT2_MODE_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - The output signal 3 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout3_mode(&self) -> DOUT3_MODE_R {
        DOUT3_MODE_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - The output signal 4 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout4_mode(&self) -> DOUT4_MODE_R {
        DOUT4_MODE_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - The output signal 5 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout5_mode(&self) -> DOUT5_MODE_R {
        DOUT5_MODE_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6 - The output signal 6 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout6_mode(&self) -> DOUT6_MODE_R {
        DOUT6_MODE_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7 - The output signal 7 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout7_mode(&self) -> DOUT7_MODE_R {
        DOUT7_MODE_R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 8 - The output signal SPI_DQS is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn d_dqs_mode(&self) -> D_DQS_MODE_R {
        D_DQS_MODE_R::new(((self.bits >> 8) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("DOUT_MODE")
            .field("dout0_mode", &format_args!("{}", self.dout0_mode().bit()))
            .field("dout1_mode", &format_args!("{}", self.dout1_mode().bit()))
            .field("dout2_mode", &format_args!("{}", self.dout2_mode().bit()))
            .field("dout3_mode", &format_args!("{}", self.dout3_mode().bit()))
            .field("dout4_mode", &format_args!("{}", self.dout4_mode().bit()))
            .field("dout5_mode", &format_args!("{}", self.dout5_mode().bit()))
            .field("dout6_mode", &format_args!("{}", self.dout6_mode().bit()))
            .field("dout7_mode", &format_args!("{}", self.dout7_mode().bit()))
            .field("d_dqs_mode", &format_args!("{}", self.d_dqs_mode().bit()))
            .finish()
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<DOUT_MODE_SPEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        self.read().fmt(f)
    }
}
#[doc = "SPI output delay mode configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dout_mode::R`](R).  See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct DOUT_MODE_SPEC;
impl crate::RegisterSpec for DOUT_MODE_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`dout_mode::R`](R) reader structure"]
impl crate::Readable for DOUT_MODE_SPEC {}
#[doc = "`reset()` method sets DOUT_MODE to value 0"]
impl crate::Resettable for DOUT_MODE_SPEC {
    const RESET_VALUE: Self::Ux = 0;
}