1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236

#[doc = r"Register block"]
#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
pub struct RegisterBlock {
    #[doc = "0x00 - Command control register"]
    pub cmd: CMD,
    #[doc = "0x04 - Address value register"]
    pub addr: ADDR,
    #[doc = "0x08 - SPI control register"]
    pub ctrl: CTRL,
    #[doc = "0x0c - SPI clock control register"]
    pub clock: CLOCK,
    #[doc = "0x10 - SPI USER control register"]
    pub user: USER,
    #[doc = "0x14 - SPI USER control register 1"]
    pub user1: USER1,
    #[doc = "0x18 - SPI USER control register 2"]
    pub user2: USER2,
    #[doc = "0x1c - SPI data bit length control register"]
    pub ms_dlen: MS_DLEN,
    #[doc = "0x20 - SPI misc register"]
    pub misc: MISC,
    #[doc = "0x24 - SPI input delay mode configuration"]
    pub din_mode: DIN_MODE,
    #[doc = "0x28 - SPI input delay number configuration"]
    pub din_num: DIN_NUM,
    #[doc = "0x2c - SPI output delay mode configuration"]
    pub dout_mode: DOUT_MODE,
    #[doc = "0x30 - SPI DMA control register"]
    pub dma_conf: DMA_CONF,
    #[doc = "0x34 - SPI interrupt enable register"]
    pub dma_int_ena: DMA_INT_ENA,
    #[doc = "0x38 - SPI interrupt clear register"]
    pub dma_int_clr: DMA_INT_CLR,
    #[doc = "0x3c - SPI interrupt raw register"]
    pub dma_int_raw: DMA_INT_RAW,
    #[doc = "0x40 - SPI interrupt status register"]
    pub dma_int_st: DMA_INT_ST,
    #[doc = "0x44 - SPI interrupt software set register"]
    pub dma_int_set: DMA_INT_SET,
    _reserved18: [u8; 0x50],
    #[doc = "0x98 - SPI CPU-controlled buffer0"]
    pub w0: W0,
    #[doc = "0x9c - SPI CPU-controlled buffer1"]
    pub w1: W1,
    #[doc = "0xa0 - SPI CPU-controlled buffer2"]
    pub w2: W2,
    #[doc = "0xa4 - SPI CPU-controlled buffer3"]
    pub w3: W3,
    #[doc = "0xa8 - SPI CPU-controlled buffer4"]
    pub w4: W4,
    #[doc = "0xac - SPI CPU-controlled buffer5"]
    pub w5: W5,
    #[doc = "0xb0 - SPI CPU-controlled buffer6"]
    pub w6: W6,
    #[doc = "0xb4 - SPI CPU-controlled buffer7"]
    pub w7: W7,
    #[doc = "0xb8 - SPI CPU-controlled buffer8"]
    pub w8: W8,
    #[doc = "0xbc - SPI CPU-controlled buffer9"]
    pub w9: W9,
    #[doc = "0xc0 - SPI CPU-controlled buffer10"]
    pub w10: W10,
    #[doc = "0xc4 - SPI CPU-controlled buffer11"]
    pub w11: W11,
    #[doc = "0xc8 - SPI CPU-controlled buffer12"]
    pub w12: W12,
    #[doc = "0xcc - SPI CPU-controlled buffer13"]
    pub w13: W13,
    #[doc = "0xd0 - SPI CPU-controlled buffer14"]
    pub w14: W14,
    #[doc = "0xd4 - SPI CPU-controlled buffer15"]
    pub w15: W15,
    _reserved34: [u8; 0x08],
    #[doc = "0xe0 - SPI slave control register"]
    pub slave: SLAVE,
    #[doc = "0xe4 - SPI slave control register 1"]
    pub slave1: SLAVE1,
    #[doc = "0xe8 - SPI module clock and register clock control"]
    pub clk_gate: CLK_GATE,
    _reserved37: [u8; 0x04],
    #[doc = "0xf0 - Version control"]
    pub date: DATE,
}
#[doc = "CMD (rw) register accessor: Command control register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmd::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmd::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`cmd`] module"]
pub type CMD = crate::Reg<cmd::CMD_SPEC>;
#[doc = "Command control register"]
pub mod cmd;
#[doc = "ADDR (rw) register accessor: Address value register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`addr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`addr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`addr`] module"]
pub type ADDR = crate::Reg<addr::ADDR_SPEC>;
#[doc = "Address value register"]
pub mod addr;
#[doc = "CTRL (rw) register accessor: SPI control register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`ctrl`] module"]
pub type CTRL = crate::Reg<ctrl::CTRL_SPEC>;
#[doc = "SPI control register"]
pub mod ctrl;
#[doc = "CLOCK (rw) register accessor: SPI clock control register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`clock::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`clock::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`clock`] module"]
pub type CLOCK = crate::Reg<clock::CLOCK_SPEC>;
#[doc = "SPI clock control register"]
pub mod clock;
#[doc = "USER (rw) register accessor: SPI USER control register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`user::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`user::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`user`] module"]
pub type USER = crate::Reg<user::USER_SPEC>;
#[doc = "SPI USER control register"]
pub mod user;
#[doc = "USER1 (rw) register accessor: SPI USER control register 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`user1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`user1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`user1`] module"]
pub type USER1 = crate::Reg<user1::USER1_SPEC>;
#[doc = "SPI USER control register 1"]
pub mod user1;
#[doc = "USER2 (rw) register accessor: SPI USER control register 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`user2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`user2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`user2`] module"]
pub type USER2 = crate::Reg<user2::USER2_SPEC>;
#[doc = "SPI USER control register 2"]
pub mod user2;
#[doc = "MS_DLEN (rw) register accessor: SPI data bit length control register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ms_dlen::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ms_dlen::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`ms_dlen`] module"]
pub type MS_DLEN = crate::Reg<ms_dlen::MS_DLEN_SPEC>;
#[doc = "SPI data bit length control register"]
pub mod ms_dlen;
#[doc = "MISC (rw) register accessor: SPI misc register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`misc::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`misc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`misc`] module"]
pub type MISC = crate::Reg<misc::MISC_SPEC>;
#[doc = "SPI misc register"]
pub mod misc;
#[doc = "DIN_MODE (r) register accessor: SPI input delay mode configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`din_mode::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`din_mode`] module"]
pub type DIN_MODE = crate::Reg<din_mode::DIN_MODE_SPEC>;
#[doc = "SPI input delay mode configuration"]
pub mod din_mode;
#[doc = "DIN_NUM (r) register accessor: SPI input delay number configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`din_num::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`din_num`] module"]
pub type DIN_NUM = crate::Reg<din_num::DIN_NUM_SPEC>;
#[doc = "SPI input delay number configuration"]
pub mod din_num;
#[doc = "DOUT_MODE (r) register accessor: SPI output delay mode configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dout_mode::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`dout_mode`] module"]
pub type DOUT_MODE = crate::Reg<dout_mode::DOUT_MODE_SPEC>;
#[doc = "SPI output delay mode configuration"]
pub mod dout_mode;
#[doc = "DMA_CONF (rw) register accessor: SPI DMA control register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dma_conf::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dma_conf::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`dma_conf`] module"]
pub type DMA_CONF = crate::Reg<dma_conf::DMA_CONF_SPEC>;
#[doc = "SPI DMA control register"]
pub mod dma_conf;
#[doc = "DMA_INT_ENA (rw) register accessor: SPI interrupt enable register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dma_int_ena::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dma_int_ena::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`dma_int_ena`] module"]
pub type DMA_INT_ENA = crate::Reg<dma_int_ena::DMA_INT_ENA_SPEC>;
#[doc = "SPI interrupt enable register"]
pub mod dma_int_ena;
#[doc = "DMA_INT_CLR (w) register accessor: SPI interrupt clear register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dma_int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`dma_int_clr`] module"]
pub type DMA_INT_CLR = crate::Reg<dma_int_clr::DMA_INT_CLR_SPEC>;
#[doc = "SPI interrupt clear register"]
pub mod dma_int_clr;
#[doc = "DMA_INT_RAW (rw) register accessor: SPI interrupt raw register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dma_int_raw::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dma_int_raw::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`dma_int_raw`] module"]
pub type DMA_INT_RAW = crate::Reg<dma_int_raw::DMA_INT_RAW_SPEC>;
#[doc = "SPI interrupt raw register"]
pub mod dma_int_raw;
#[doc = "DMA_INT_ST (r) register accessor: SPI interrupt status register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dma_int_st::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`dma_int_st`] module"]
pub type DMA_INT_ST = crate::Reg<dma_int_st::DMA_INT_ST_SPEC>;
#[doc = "SPI interrupt status register"]
pub mod dma_int_st;
#[doc = "DMA_INT_SET (w) register accessor: SPI interrupt software set register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dma_int_set::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`dma_int_set`] module"]
pub type DMA_INT_SET = crate::Reg<dma_int_set::DMA_INT_SET_SPEC>;
#[doc = "SPI interrupt software set register"]
pub mod dma_int_set;
#[doc = "W0 (rw) register accessor: SPI CPU-controlled buffer0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w0`] module"]
pub type W0 = crate::Reg<w0::W0_SPEC>;
#[doc = "SPI CPU-controlled buffer0"]
pub mod w0;
#[doc = "W1 (rw) register accessor: SPI CPU-controlled buffer1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w1`] module"]
pub type W1 = crate::Reg<w1::W1_SPEC>;
#[doc = "SPI CPU-controlled buffer1"]
pub mod w1;
#[doc = "W2 (rw) register accessor: SPI CPU-controlled buffer2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w2`] module"]
pub type W2 = crate::Reg<w2::W2_SPEC>;
#[doc = "SPI CPU-controlled buffer2"]
pub mod w2;
#[doc = "W3 (rw) register accessor: SPI CPU-controlled buffer3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w3`] module"]
pub type W3 = crate::Reg<w3::W3_SPEC>;
#[doc = "SPI CPU-controlled buffer3"]
pub mod w3;
#[doc = "W4 (rw) register accessor: SPI CPU-controlled buffer4\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w4`] module"]
pub type W4 = crate::Reg<w4::W4_SPEC>;
#[doc = "SPI CPU-controlled buffer4"]
pub mod w4;
#[doc = "W5 (rw) register accessor: SPI CPU-controlled buffer5\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w5`] module"]
pub type W5 = crate::Reg<w5::W5_SPEC>;
#[doc = "SPI CPU-controlled buffer5"]
pub mod w5;
#[doc = "W6 (rw) register accessor: SPI CPU-controlled buffer6\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w6`] module"]
pub type W6 = crate::Reg<w6::W6_SPEC>;
#[doc = "SPI CPU-controlled buffer6"]
pub mod w6;
#[doc = "W7 (rw) register accessor: SPI CPU-controlled buffer7\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w7`] module"]
pub type W7 = crate::Reg<w7::W7_SPEC>;
#[doc = "SPI CPU-controlled buffer7"]
pub mod w7;
#[doc = "W8 (rw) register accessor: SPI CPU-controlled buffer8\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w8`] module"]
pub type W8 = crate::Reg<w8::W8_SPEC>;
#[doc = "SPI CPU-controlled buffer8"]
pub mod w8;
#[doc = "W9 (rw) register accessor: SPI CPU-controlled buffer9\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w9`] module"]
pub type W9 = crate::Reg<w9::W9_SPEC>;
#[doc = "SPI CPU-controlled buffer9"]
pub mod w9;
#[doc = "W10 (rw) register accessor: SPI CPU-controlled buffer10\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w10`] module"]
pub type W10 = crate::Reg<w10::W10_SPEC>;
#[doc = "SPI CPU-controlled buffer10"]
pub mod w10;
#[doc = "W11 (rw) register accessor: SPI CPU-controlled buffer11\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w11`] module"]
pub type W11 = crate::Reg<w11::W11_SPEC>;
#[doc = "SPI CPU-controlled buffer11"]
pub mod w11;
#[doc = "W12 (rw) register accessor: SPI CPU-controlled buffer12\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w12`] module"]
pub type W12 = crate::Reg<w12::W12_SPEC>;
#[doc = "SPI CPU-controlled buffer12"]
pub mod w12;
#[doc = "W13 (rw) register accessor: SPI CPU-controlled buffer13\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w13`] module"]
pub type W13 = crate::Reg<w13::W13_SPEC>;
#[doc = "SPI CPU-controlled buffer13"]
pub mod w13;
#[doc = "W14 (rw) register accessor: SPI CPU-controlled buffer14\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w14`] module"]
pub type W14 = crate::Reg<w14::W14_SPEC>;
#[doc = "SPI CPU-controlled buffer14"]
pub mod w14;
#[doc = "W15 (rw) register accessor: SPI CPU-controlled buffer15\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`w15::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`w15::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`w15`] module"]
pub type W15 = crate::Reg<w15::W15_SPEC>;
#[doc = "SPI CPU-controlled buffer15"]
pub mod w15;
#[doc = "SLAVE (rw) register accessor: SPI slave control register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`slave::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`slave::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`slave`] module"]
pub type SLAVE = crate::Reg<slave::SLAVE_SPEC>;
#[doc = "SPI slave control register"]
pub mod slave;
#[doc = "SLAVE1 (rw) register accessor: SPI slave control register 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`slave1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`slave1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`slave1`] module"]
pub type SLAVE1 = crate::Reg<slave1::SLAVE1_SPEC>;
#[doc = "SPI slave control register 1"]
pub mod slave1;
#[doc = "CLK_GATE (rw) register accessor: SPI module clock and register clock control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`clk_gate::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`clk_gate::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`clk_gate`] module"]
pub type CLK_GATE = crate::Reg<clk_gate::CLK_GATE_SPEC>;
#[doc = "SPI module clock and register clock control"]
pub mod clk_gate;
#[doc = "DATE (rw) register accessor: Version control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`date::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`date::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`date`] module"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "Version control"]
pub mod date;