Module esp32c2_hal::pac::spi1::int_raw

SPI1 interrupt raw register

Structs

INT_RAW_SPEC

SPI1 interrupt raw register

R

Register INT_RAW reader

Type Definitions

BROWN_OUT_INT_RAW_R

Field BROWN_OUT_INT_RAW reader - The raw bit for SPI_MEM_BROWN_OUT_INT interrupt. 1: Triggered condition is that chip is loosing power and RTC module sends out brown out close flash request to SPI1. After SPI1 sends out suspend command to flash, this interrupt is triggered and MSPI returns to idle state. 0: Others.

MST_ST_END_INT_RAW_R

Field MST_ST_END_INT_RAW reader - The raw bit for SPI_MEM_MST_ST_END_INT interrupt. 1: Triggered when spi1_mst_st is changed from non idle state to idle state. 0: Others.

PER_END_INT_RAW_R

Field PER_END_INT_RAW reader - The raw bit for SPI_MEM_PER_END_INT interrupt. 1: Triggered when Auto Resume command (0x7A) is sent and flash is resumed. 0: Others.

PES_END_INT_RAW_R

Field PES_END_INT_RAW reader - The raw bit for SPI_MEM_PES_END_INT interrupt.1: Triggered when Auto Suspend command (0x75) is sent and flash is suspended. 0: Others.

SLV_ST_END_INT_RAW_R

Field SLV_ST_END_INT_RAW reader - The raw bit for SPI_MEM_SLV_ST_END_INT interrupt. 1: Triggered when spi1_slv_st is changed from non idle state to idle state. It means that SPI_CS raises high. 0: Others

WPE_END_INT_RAW_R

Field WPE_END_INT_RAW reader - The raw bit for SPI_MEM_WPE_END_INT interrupt. 1: Triggered when WRSR/PP/SE/BE/CE is sent and flash is already idle. 0: Others.