Struct esp32c2_hal::pac::ledc::int_clr::W

pub struct W(_);

Register INT_CLR writer

Implementations

impl W

pub fn ovf_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 0>

Bit 0 - Set this bit to clear the LEDC_TIMER0_OVF_INT interrupt.

pub fn timer1_ovf_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 1>

Bit 1 - Set this bit to clear the LEDC_TIMER1_OVF_INT interrupt.

pub fn timer2_ovf_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 2>

Bit 2 - Set this bit to clear the LEDC_TIMER2_OVF_INT interrupt.

pub fn timer3_ovf_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 3>

Bit 3 - Set this bit to clear the LEDC_TIMER3_OVF_INT interrupt.

pub fn duty_chng_end_ch0_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 4>

Bit 4 - Set this bit to clear the LEDC_DUTY_CHNG_END_CH0_INT interrupt.

pub fn duty_chng_end_ch1_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 5>

Bit 5 - Set this bit to clear the LEDC_DUTY_CHNG_END_CH1_INT interrupt.

pub fn duty_chng_end_ch2_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 6>

Bit 6 - Set this bit to clear the LEDC_DUTY_CHNG_END_CH2_INT interrupt.

pub fn duty_chng_end_ch3_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 7>

Bit 7 - Set this bit to clear the LEDC_DUTY_CHNG_END_CH3_INT interrupt.

pub fn duty_chng_end_ch4_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 8>

Bit 8 - Set this bit to clear the LEDC_DUTY_CHNG_END_CH4_INT interrupt.

pub fn duty_chng_end_ch5_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 9>

Bit 9 - Set this bit to clear the LEDC_DUTY_CHNG_END_CH5_INT interrupt.

pub fn ovf_cnt_ch0_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 10>

Bit 10 - Set this bit to clear the LEDC_OVF_CNT_CH0_INT interrupt.

pub fn ovf_cnt_ch1_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 11>

Bit 11 - Set this bit to clear the LEDC_OVF_CNT_CH1_INT interrupt.

pub fn ovf_cnt_ch2_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 12>

Bit 12 - Set this bit to clear the LEDC_OVF_CNT_CH2_INT interrupt.

pub fn ovf_cnt_ch3_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 13>

Bit 13 - Set this bit to clear the LEDC_OVF_CNT_CH3_INT interrupt.

pub fn ovf_cnt_ch4_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 14>

Bit 14 - Set this bit to clear the LEDC_OVF_CNT_CH4_INT interrupt.

pub fn ovf_cnt_ch5_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 15>

Bit 15 - Set this bit to clear the LEDC_OVF_CNT_CH5_INT interrupt.

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<INT_CLR_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<INT_CLR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<INT_CLR_SPEC>> for W

fn from(writer: W<INT_CLR_SPEC>) -> W

Converts to this type from the input type.