Type Alias W

pub type W = W<CMD_SPEC>;

Register CMD writer

Aliased Type

pub struct W { /* private fields */ }

Implementations

impl W

pub fn flash_per(&mut self) -> FLASH_PER_W<'_, CMD_SPEC>

Bit 16 - program erase resume bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_pes(&mut self) -> FLASH_PES_W<'_, CMD_SPEC>

Bit 17 - program erase suspend bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn usr(&mut self) -> USR_W<'_, CMD_SPEC>

Bit 18 - User define command enable. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_hpm(&mut self) -> FLASH_HPM_W<'_, CMD_SPEC>

Bit 19 - Drive Flash into high performance mode. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_res(&mut self) -> FLASH_RES_W<'_, CMD_SPEC>

Bit 20 - This bit combined with reg_resandres bit releases Flash from the power-down state or high performance mode and obtains the devices ID. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_dp(&mut self) -> FLASH_DP_W<'_, CMD_SPEC>

Bit 21 - Drive Flash into power down. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_ce(&mut self) -> FLASH_CE_W<'_, CMD_SPEC>

Bit 22 - Chip erase enable. Chip erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_be(&mut self) -> FLASH_BE_W<'_, CMD_SPEC>

Bit 23 - Block erase enable. A 64KB block is erased via SPI command D8H. Block erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_se(&mut self) -> FLASH_SE_W<'_, CMD_SPEC>

Bit 24 - Sector erase enable. A 4KB sector is erased via SPI command 20H. Sector erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_pp(&mut self) -> FLASH_PP_W<'_, CMD_SPEC>

Bit 25 - Page program enable(1 byte ~256 bytes data to be programmed). Page program operation will be triggered when the bit is set. The bit will be cleared once the operation done .1: enable 0: disable.

pub fn flash_wrsr(&mut self) -> FLASH_WRSR_W<'_, CMD_SPEC>

Bit 26 - Write status register enable. Write status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_rdsr(&mut self) -> FLASH_RDSR_W<'_, CMD_SPEC>

Bit 27 - Read status register-1. Read status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.

pub fn flash_rdid(&mut self) -> FLASH_RDID_W<'_, CMD_SPEC>

Bit 28 - Read JEDEC ID . Read ID command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.

pub fn flash_wrdi(&mut self) -> FLASH_WRDI_W<'_, CMD_SPEC>

Bit 29 - Write flash disable. Write disable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.

pub fn flash_wren(&mut self) -> FLASH_WREN_W<'_, CMD_SPEC>

Bit 30 - Write flash enable. Write enable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.

pub fn flash_read(&mut self) -> FLASH_READ_W<'_, CMD_SPEC>

Bit 31 - Read flash enable. Read flash operation will be triggered when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.