Type Alias esp32::i2c0::int_clr::W

source ·
pub type W = W<INT_CLR_SPEC>;
Expand description

Register INT_CLR writer

Aliased Type§

struct W { /* private fields */ }

Implementations§

source§

impl W

source

pub fn rxfifo_full_int_clr(&mut self) -> RXFIFO_FULL_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 0 - Set this bit to clear the rxfifo_full_int interrupt.

source

pub fn txfifo_empty_int_clr( &mut self ) -> TXFIFO_EMPTY_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 1 - Set this bit to clear the txfifo_empty_int interrupt.

source

pub fn rxfifo_ovf_int_clr(&mut self) -> RXFIFO_OVF_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 2 - Set this bit to clear the rxfifo_ovf_int interrupt.

source

pub fn end_detect_int_clr(&mut self) -> END_DETECT_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 3 - Set this bit to clear the end_detect_int interrupt.

source

pub fn slave_tran_comp_int_clr( &mut self ) -> SLAVE_TRAN_COMP_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 4 - Set this bit to clear the slave_tran_comp_int interrupt.

source

pub fn arbitration_lost_int_clr( &mut self ) -> ARBITRATION_LOST_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 5 - Set this bit to clear the arbitration_lost_int interrupt.

source

pub fn master_tran_comp_int_clr( &mut self ) -> MASTER_TRAN_COMP_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 6 - Set this bit to clear the master_tran_comp interrupt.

source

pub fn trans_complete_int_clr( &mut self ) -> TRANS_COMPLETE_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 7 - Set this bit to clear the trans_complete_int interrupt.

source

pub fn time_out_int_clr(&mut self) -> TIME_OUT_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 8 - Set this bit to clear the time_out_int interrupt.

source

pub fn trans_start_int_clr(&mut self) -> TRANS_START_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 9 - Set this bit to clear the trans_start_int interrupt.

source

pub fn ack_err_int_clr(&mut self) -> ACK_ERR_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 10 - Set this bit to clear the ack_err_int interrupt.

source

pub fn rx_rec_full_int_clr(&mut self) -> RX_REC_FULL_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 11 - Set this bit to clear the rx_rec_full_int interrupt.

source

pub fn tx_send_empty_int_clr( &mut self ) -> TX_SEND_EMPTY_INT_CLR_W<'_, INT_CLR_SPEC>

Bit 12 - Set this bit to clear the tx_send_empty_int interrupt.

source

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

§Safety

Passing incorrect value can cause undefined behaviour. See reference manual