#[doc = "Register `DMA_CONF` reader"]
pub type R = crate::R<DMA_CONF_SPEC>;
#[doc = "Register `DMA_CONF` writer"]
pub type W = crate::W<DMA_CONF_SPEC>;
#[doc = "Field `IN_RST` reader - The bit is used to reset in dma fsm and in data fifo pointer."]
pub type IN_RST_R = crate::BitReader;
#[doc = "Field `IN_RST` writer - The bit is used to reset in dma fsm and in data fifo pointer."]
pub type IN_RST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_RST` reader - The bit is used to reset out dma fsm and out data fifo pointer."]
pub type OUT_RST_R = crate::BitReader;
#[doc = "Field `OUT_RST` writer - The bit is used to reset out dma fsm and out data fifo pointer."]
pub type OUT_RST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `AHBM_FIFO_RST` reader - reset spi dma ahb master fifo pointer."]
pub type AHBM_FIFO_RST_R = crate::BitReader;
#[doc = "Field `AHBM_FIFO_RST` writer - reset spi dma ahb master fifo pointer."]
pub type AHBM_FIFO_RST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `AHBM_RST` reader - reset spi dma ahb master."]
pub type AHBM_RST_R = crate::BitReader;
#[doc = "Field `AHBM_RST` writer - reset spi dma ahb master."]
pub type AHBM_RST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `IN_LOOP_TEST` reader - Set bit to test in link."]
pub type IN_LOOP_TEST_R = crate::BitReader;
#[doc = "Field `IN_LOOP_TEST` writer - Set bit to test in link."]
pub type IN_LOOP_TEST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_LOOP_TEST` reader - Set bit to test out link."]
pub type OUT_LOOP_TEST_R = crate::BitReader;
#[doc = "Field `OUT_LOOP_TEST` writer - Set bit to test out link."]
pub type OUT_LOOP_TEST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_AUTO_WRBACK` reader - when the link is empty jump to next automatically."]
pub type OUT_AUTO_WRBACK_R = crate::BitReader;
#[doc = "Field `OUT_AUTO_WRBACK` writer - when the link is empty jump to next automatically."]
pub type OUT_AUTO_WRBACK_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_EOF_MODE` reader - out eof flag generation mode . 1: when dma pop all data from fifo 0:when ahb push all data to fifo."]
pub type OUT_EOF_MODE_R = crate::BitReader;
#[doc = "Field `OUT_EOF_MODE` writer - out eof flag generation mode . 1: when dma pop all data from fifo 0:when ahb push all data to fifo."]
pub type OUT_EOF_MODE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUTDSCR_BURST_EN` reader - read descriptor use burst mode when read data for memory."]
pub type OUTDSCR_BURST_EN_R = crate::BitReader;
#[doc = "Field `OUTDSCR_BURST_EN` writer - read descriptor use burst mode when read data for memory."]
pub type OUTDSCR_BURST_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `INDSCR_BURST_EN` reader - read descriptor use burst mode when write data to memory."]
pub type INDSCR_BURST_EN_R = crate::BitReader;
#[doc = "Field `INDSCR_BURST_EN` writer - read descriptor use burst mode when write data to memory."]
pub type INDSCR_BURST_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_DATA_BURST_EN` reader - spi dma read data from memory in burst mode."]
pub type OUT_DATA_BURST_EN_R = crate::BitReader;
#[doc = "Field `OUT_DATA_BURST_EN` writer - spi dma read data from memory in burst mode."]
pub type OUT_DATA_BURST_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `DMA_RX_STOP` reader - spi dma read data stop when in continue tx/rx mode."]
pub type DMA_RX_STOP_R = crate::BitReader;
#[doc = "Field `DMA_RX_STOP` writer - spi dma read data stop when in continue tx/rx mode."]
pub type DMA_RX_STOP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `DMA_TX_STOP` reader - spi dma write data stop when in continue tx/rx mode."]
pub type DMA_TX_STOP_R = crate::BitReader;
#[doc = "Field `DMA_TX_STOP` writer - spi dma write data stop when in continue tx/rx mode."]
pub type DMA_TX_STOP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `DMA_CONTINUE` reader - spi dma continue tx/rx data."]
pub type DMA_CONTINUE_R = crate::BitReader;
#[doc = "Field `DMA_CONTINUE` writer - spi dma continue tx/rx data."]
pub type DMA_CONTINUE_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 2 - The bit is used to reset in dma fsm and in data fifo pointer."]
#[inline(always)]
pub fn in_rst(&self) -> IN_RST_R {
IN_RST_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - The bit is used to reset out dma fsm and out data fifo pointer."]
#[inline(always)]
pub fn out_rst(&self) -> OUT_RST_R {
OUT_RST_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - reset spi dma ahb master fifo pointer."]
#[inline(always)]
pub fn ahbm_fifo_rst(&self) -> AHBM_FIFO_RST_R {
AHBM_FIFO_RST_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5 - reset spi dma ahb master."]
#[inline(always)]
pub fn ahbm_rst(&self) -> AHBM_RST_R {
AHBM_RST_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - Set bit to test in link."]
#[inline(always)]
pub fn in_loop_test(&self) -> IN_LOOP_TEST_R {
IN_LOOP_TEST_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - Set bit to test out link."]
#[inline(always)]
pub fn out_loop_test(&self) -> OUT_LOOP_TEST_R {
OUT_LOOP_TEST_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - when the link is empty jump to next automatically."]
#[inline(always)]
pub fn out_auto_wrback(&self) -> OUT_AUTO_WRBACK_R {
OUT_AUTO_WRBACK_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - out eof flag generation mode . 1: when dma pop all data from fifo 0:when ahb push all data to fifo."]
#[inline(always)]
pub fn out_eof_mode(&self) -> OUT_EOF_MODE_R {
OUT_EOF_MODE_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - read descriptor use burst mode when read data for memory."]
#[inline(always)]
pub fn outdscr_burst_en(&self) -> OUTDSCR_BURST_EN_R {
OUTDSCR_BURST_EN_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11 - read descriptor use burst mode when write data to memory."]
#[inline(always)]
pub fn indscr_burst_en(&self) -> INDSCR_BURST_EN_R {
INDSCR_BURST_EN_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 12 - spi dma read data from memory in burst mode."]
#[inline(always)]
pub fn out_data_burst_en(&self) -> OUT_DATA_BURST_EN_R {
OUT_DATA_BURST_EN_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 14 - spi dma read data stop when in continue tx/rx mode."]
#[inline(always)]
pub fn dma_rx_stop(&self) -> DMA_RX_STOP_R {
DMA_RX_STOP_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - spi dma write data stop when in continue tx/rx mode."]
#[inline(always)]
pub fn dma_tx_stop(&self) -> DMA_TX_STOP_R {
DMA_TX_STOP_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - spi dma continue tx/rx data."]
#[inline(always)]
pub fn dma_continue(&self) -> DMA_CONTINUE_R {
DMA_CONTINUE_R::new(((self.bits >> 16) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("DMA_CONF")
.field("in_rst", &format_args!("{}", self.in_rst().bit()))
.field("out_rst", &format_args!("{}", self.out_rst().bit()))
.field(
"ahbm_fifo_rst",
&format_args!("{}", self.ahbm_fifo_rst().bit()),
)
.field("ahbm_rst", &format_args!("{}", self.ahbm_rst().bit()))
.field(
"in_loop_test",
&format_args!("{}", self.in_loop_test().bit()),
)
.field(
"out_loop_test",
&format_args!("{}", self.out_loop_test().bit()),
)
.field(
"out_auto_wrback",
&format_args!("{}", self.out_auto_wrback().bit()),
)
.field(
"out_eof_mode",
&format_args!("{}", self.out_eof_mode().bit()),
)
.field(
"outdscr_burst_en",
&format_args!("{}", self.outdscr_burst_en().bit()),
)
.field(
"indscr_burst_en",
&format_args!("{}", self.indscr_burst_en().bit()),
)
.field(
"out_data_burst_en",
&format_args!("{}", self.out_data_burst_en().bit()),
)
.field("dma_rx_stop", &format_args!("{}", self.dma_rx_stop().bit()))
.field("dma_tx_stop", &format_args!("{}", self.dma_tx_stop().bit()))
.field(
"dma_continue",
&format_args!("{}", self.dma_continue().bit()),
)
.finish()
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<DMA_CONF_SPEC> {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
core::fmt::Debug::fmt(&self.read(), f)
}
}
impl W {
#[doc = "Bit 2 - The bit is used to reset in dma fsm and in data fifo pointer."]
#[inline(always)]
#[must_use]
pub fn in_rst(&mut self) -> IN_RST_W<DMA_CONF_SPEC> {
IN_RST_W::new(self, 2)
}
#[doc = "Bit 3 - The bit is used to reset out dma fsm and out data fifo pointer."]
#[inline(always)]
#[must_use]
pub fn out_rst(&mut self) -> OUT_RST_W<DMA_CONF_SPEC> {
OUT_RST_W::new(self, 3)
}
#[doc = "Bit 4 - reset spi dma ahb master fifo pointer."]
#[inline(always)]
#[must_use]
pub fn ahbm_fifo_rst(&mut self) -> AHBM_FIFO_RST_W<DMA_CONF_SPEC> {
AHBM_FIFO_RST_W::new(self, 4)
}
#[doc = "Bit 5 - reset spi dma ahb master."]
#[inline(always)]
#[must_use]
pub fn ahbm_rst(&mut self) -> AHBM_RST_W<DMA_CONF_SPEC> {
AHBM_RST_W::new(self, 5)
}
#[doc = "Bit 6 - Set bit to test in link."]
#[inline(always)]
#[must_use]
pub fn in_loop_test(&mut self) -> IN_LOOP_TEST_W<DMA_CONF_SPEC> {
IN_LOOP_TEST_W::new(self, 6)
}
#[doc = "Bit 7 - Set bit to test out link."]
#[inline(always)]
#[must_use]
pub fn out_loop_test(&mut self) -> OUT_LOOP_TEST_W<DMA_CONF_SPEC> {
OUT_LOOP_TEST_W::new(self, 7)
}
#[doc = "Bit 8 - when the link is empty jump to next automatically."]
#[inline(always)]
#[must_use]
pub fn out_auto_wrback(&mut self) -> OUT_AUTO_WRBACK_W<DMA_CONF_SPEC> {
OUT_AUTO_WRBACK_W::new(self, 8)
}
#[doc = "Bit 9 - out eof flag generation mode . 1: when dma pop all data from fifo 0:when ahb push all data to fifo."]
#[inline(always)]
#[must_use]
pub fn out_eof_mode(&mut self) -> OUT_EOF_MODE_W<DMA_CONF_SPEC> {
OUT_EOF_MODE_W::new(self, 9)
}
#[doc = "Bit 10 - read descriptor use burst mode when read data for memory."]
#[inline(always)]
#[must_use]
pub fn outdscr_burst_en(&mut self) -> OUTDSCR_BURST_EN_W<DMA_CONF_SPEC> {
OUTDSCR_BURST_EN_W::new(self, 10)
}
#[doc = "Bit 11 - read descriptor use burst mode when write data to memory."]
#[inline(always)]
#[must_use]
pub fn indscr_burst_en(&mut self) -> INDSCR_BURST_EN_W<DMA_CONF_SPEC> {
INDSCR_BURST_EN_W::new(self, 11)
}
#[doc = "Bit 12 - spi dma read data from memory in burst mode."]
#[inline(always)]
#[must_use]
pub fn out_data_burst_en(&mut self) -> OUT_DATA_BURST_EN_W<DMA_CONF_SPEC> {
OUT_DATA_BURST_EN_W::new(self, 12)
}
#[doc = "Bit 14 - spi dma read data stop when in continue tx/rx mode."]
#[inline(always)]
#[must_use]
pub fn dma_rx_stop(&mut self) -> DMA_RX_STOP_W<DMA_CONF_SPEC> {
DMA_RX_STOP_W::new(self, 14)
}
#[doc = "Bit 15 - spi dma write data stop when in continue tx/rx mode."]
#[inline(always)]
#[must_use]
pub fn dma_tx_stop(&mut self) -> DMA_TX_STOP_W<DMA_CONF_SPEC> {
DMA_TX_STOP_W::new(self, 15)
}
#[doc = "Bit 16 - spi dma continue tx/rx data."]
#[inline(always)]
#[must_use]
pub fn dma_continue(&mut self) -> DMA_CONTINUE_W<DMA_CONF_SPEC> {
DMA_CONTINUE_W::new(self, 16)
}
#[doc = r" Writes raw bits to the register."]
#[doc = r""]
#[doc = r" # Safety"]
#[doc = r""]
#[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
}
#[doc = "\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dma_conf::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dma_conf::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct DMA_CONF_SPEC;
impl crate::RegisterSpec for DMA_CONF_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`dma_conf::R`](R) reader structure"]
impl crate::Readable for DMA_CONF_SPEC {}
#[doc = "`write(|w| ..)` method takes [`dma_conf::W`](W) writer structure"]
impl crate::Writable for DMA_CONF_SPEC {
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets DMA_CONF to value 0x0200"]
impl crate::Resettable for DMA_CONF_SPEC {
const RESET_VALUE: Self::Ux = 0x0200;
}