Struct esp32::spi0::ctrl2::W

source ·
pub struct W(_);
Expand description

Register CTRL2 writer

Implementations§

source§

impl W

source

pub fn setup_time(&mut self) -> SETUP_TIME_W<'_, 0>

Bits 0:3 - (cycles-1) of ¡°prepare¡± phase by spi clock, this bits combined with spi_cs_setup bit.

source

pub fn hold_time(&mut self) -> HOLD_TIME_W<'_, 4>

Bits 4:7 - delay cycles of cs pin by spi clock, this bits combined with spi_cs_hold bit.

source

pub fn ck_out_low_mode(&mut self) -> CK_OUT_LOW_MODE_W<'_, 8>

Bits 8:11 - modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_L bits.

source

pub fn ck_out_high_mode(&mut self) -> CK_OUT_HIGH_MODE_W<'_, 12>

Bits 12:15 - modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_H bits.

source

pub fn miso_delay_mode(&mut self) -> MISO_DELAY_MODE_W<'_, 16>

Bits 16:17 - MISO signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle

source

pub fn miso_delay_num(&mut self) -> MISO_DELAY_NUM_W<'_, 18>

Bits 18:20 - MISO signals are delayed by system clock cycles

source

pub fn mosi_delay_mode(&mut self) -> MOSI_DELAY_MODE_W<'_, 21>

Bits 21:22 - MOSI signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle

source

pub fn mosi_delay_num(&mut self) -> MOSI_DELAY_NUM_W<'_, 23>

Bits 23:25 - MOSI signals are delayed by system clock cycles

source

pub fn cs_delay_mode(&mut self) -> CS_DELAY_MODE_W<'_, 26>

Bits 26:27 - spi_cs signal is delayed by spi_clk . 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle

source

pub fn cs_delay_num(&mut self) -> CS_DELAY_NUM_W<'_, 28>

Bits 28:31 - spi_cs signal is delayed by system clock cycles

source

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<CTRL2_SPEC>>§

source

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations§

source§

impl Deref for W

§

type Target = W<CTRL2_SPEC>

The resulting type after dereferencing.
source§

fn deref(&self) -> &Self::Target

Dereferences the value.
source§

impl DerefMut for W

source§

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.
source§

impl From<W<CTRL2_SPEC>> for W

source§

fn from(writer: W<CTRL2_SPEC>) -> Self

Converts to this type from the input type.

Auto Trait Implementations§

§

impl RefUnwindSafe for W

§

impl Send for W

§

impl Sync for W

§

impl Unpin for W

§

impl UnwindSafe for W

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.