Struct esp32::rmt::int_ena::R

pub struct R(_);

Register INT_ENA reader

Implementations

impl R

pub unsafe fn ch_tx_end_int_ena(&self, n: u8) -> CH_TX_END_INT_ENA_R

Set this bit to enable rmt_ch[0-7]_tx_end_int_st.

pub fn ch0_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 0 - Set this bit to enable rmt_ch0_tx_end_int_st.

pub fn ch1_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 3 - Set this bit to enable rmt_ch1_tx_end_int_st.

pub fn ch2_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 6 - Set this bit to enable rmt_ch2_tx_end_int_st.

pub fn ch3_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 9 - Set this bit to enable rmt_ch3_tx_end_int_st.

pub fn ch4_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 12 - Set this bit to enable rmt_ch4_tx_end_int_st.

pub fn ch5_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 15 - Set this bit to enable rmt_ch5_tx_end_int_st.

pub fn ch6_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 18 - Set this bit to enable rmt_ch6_tx_end_int_st.

pub fn ch7_tx_end_int_ena(&self) -> CH_TX_END_INT_ENA_R

Bit 21 - Set this bit to enable rmt_ch7_tx_end_int_st.

pub unsafe fn ch_rx_end_int_ena(&self, n: u8) -> CH_RX_END_INT_ENA_R

Set this bit to enable rmt_ch[0-7]_rx_end_int_st.

pub fn ch0_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 1 - Set this bit to enable rmt_ch0_rx_end_int_st.

pub fn ch1_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 4 - Set this bit to enable rmt_ch1_rx_end_int_st.

pub fn ch2_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 7 - Set this bit to enable rmt_ch2_rx_end_int_st.

pub fn ch3_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 10 - Set this bit to enable rmt_ch3_rx_end_int_st.

pub fn ch4_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 13 - Set this bit to enable rmt_ch4_rx_end_int_st.

pub fn ch5_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 16 - Set this bit to enable rmt_ch5_rx_end_int_st.

pub fn ch6_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 19 - Set this bit to enable rmt_ch6_rx_end_int_st.

pub fn ch7_rx_end_int_ena(&self) -> CH_RX_END_INT_ENA_R

Bit 22 - Set this bit to enable rmt_ch7_rx_end_int_st.

pub unsafe fn ch_err_int_ena(&self, n: u8) -> CH_ERR_INT_ENA_R

Set this bit to enable rmt_ch[0-7]_err_int_st.

pub fn ch0_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 2 - Set this bit to enable rmt_ch0_err_int_st.

pub fn ch1_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 5 - Set this bit to enable rmt_ch1_err_int_st.

pub fn ch2_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 8 - Set this bit to enable rmt_ch2_err_int_st.

pub fn ch3_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 11 - Set this bit to enable rmt_ch3_err_int_st.

pub fn ch4_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 14 - Set this bit to enable rmt_ch4_err_int_st.

pub fn ch5_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 17 - Set this bit to enable rmt_ch5_err_int_st.

pub fn ch6_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 20 - Set this bit to enable rmt_ch6_err_int_st.

pub fn ch7_err_int_ena(&self) -> CH_ERR_INT_ENA_R

Bit 23 - Set this bit to enable rmt_ch7_err_int_st.

pub unsafe fn ch_tx_thr_event_int_ena(&self, n: u8) -> CH_TX_THR_EVENT_INT_ENA_R

Set this bit to enable rmt_ch[0-7]_tx_thr_event_int_st.

pub fn ch0_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 24 - Set this bit to enable rmt_ch0_tx_thr_event_int_st.

pub fn ch1_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 25 - Set this bit to enable rmt_ch1_tx_thr_event_int_st.

pub fn ch2_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 26 - Set this bit to enable rmt_ch2_tx_thr_event_int_st.

pub fn ch3_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 27 - Set this bit to enable rmt_ch3_tx_thr_event_int_st.

pub fn ch4_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 28 - Set this bit to enable rmt_ch4_tx_thr_event_int_st.

pub fn ch5_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 29 - Set this bit to enable rmt_ch5_tx_thr_event_int_st.

pub fn ch6_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 30 - Set this bit to enable rmt_ch6_tx_thr_event_int_st.

pub fn ch7_tx_thr_event_int_ena(&self) -> CH_TX_THR_EVENT_INT_ENA_R

Bit 31 - Set this bit to enable rmt_ch7_tx_thr_event_int_st.

Methods from Deref<Target = R<INT_ENA_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<INT_ENA_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> Self

Converts to this type from the input type.