Struct esp32::i2c0::int_clr::W

pub struct W(_);

Register INT_CLR writer

Implementations

impl W

pub fn rxfifo_full_int_clr(&mut self) -> RXFIFO_FULL_INT_CLR_W<'_, 0>

Bit 0 - Set this bit to clear the rxfifo_full_int interrupt.

pub fn txfifo_empty_int_clr(&mut self) -> TXFIFO_EMPTY_INT_CLR_W<'_, 1>

Bit 1 - Set this bit to clear the txfifo_empty_int interrupt.

pub fn rxfifo_ovf_int_clr(&mut self) -> RXFIFO_OVF_INT_CLR_W<'_, 2>

Bit 2 - Set this bit to clear the rxfifo_ovf_int interrupt.

pub fn end_detect_int_clr(&mut self) -> END_DETECT_INT_CLR_W<'_, 3>

Bit 3 - Set this bit to clear the end_detect_int interrupt.

pub fn slave_tran_comp_int_clr(&mut self) -> SLAVE_TRAN_COMP_INT_CLR_W<'_, 4>

Bit 4 - Set this bit to clear the slave_tran_comp_int interrupt.

pub fn arbitration_lost_int_clr(&mut self) -> ARBITRATION_LOST_INT_CLR_W<'_, 5>

Bit 5 - Set this bit to clear the arbitration_lost_int interrupt.

pub fn master_tran_comp_int_clr(&mut self) -> MASTER_TRAN_COMP_INT_CLR_W<'_, 6>

Bit 6 - Set this bit to clear the master_tran_comp interrupt.

pub fn trans_complete_int_clr(&mut self) -> TRANS_COMPLETE_INT_CLR_W<'_, 7>

Bit 7 - Set this bit to clear the trans_complete_int interrupt.

pub fn time_out_int_clr(&mut self) -> TIME_OUT_INT_CLR_W<'_, 8>

Bit 8 - Set this bit to clear the time_out_int interrupt.

pub fn trans_start_int_clr(&mut self) -> TRANS_START_INT_CLR_W<'_, 9>

Bit 9 - Set this bit to clear the trans_start_int interrupt.

pub fn ack_err_int_clr(&mut self) -> ACK_ERR_INT_CLR_W<'_, 10>

Bit 10 - Set this bit to clear the ack_err_int interrupt.

pub fn rx_rec_full_int_clr(&mut self) -> RX_REC_FULL_INT_CLR_W<'_, 11>

Bit 11 - Set this bit to clear the rx_rec_full_int interrupt.

pub fn tx_send_empty_int_clr(&mut self) -> TX_SEND_EMPTY_INT_CLR_W<'_, 12>

Bit 12 - Set this bit to clear the tx_send_empty_int interrupt.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<INT_CLR_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<INT_CLR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<INT_CLR_SPEC>> for W

fn from(writer: W<INT_CLR_SPEC>) -> Self

Converts to this type from the input type.