1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96

#[doc = "Register `RINTSTS` reader"]
pub struct R(crate::R<RINTSTS_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<RINTSTS_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<RINTSTS_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<RINTSTS_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `RINTSTS` writer"]
pub struct W(crate::W<RINTSTS_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<RINTSTS_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<RINTSTS_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<RINTSTS_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `INT_STATUS_RAW` reader - Setting a bit clears the corresponding interrupt and writing 0 has no effect. Bits are logged regardless of interrupt mask status. Bit 15 (EBE): End-bit error/no CRC error; Bit 14 (ACD): Auto command done; Bit 13 (SBE/BCI): RX Start Bit Error; Bit 12 (HLE): Hardware locked write error; Bit 11 (FRUN): FIFO underrun/overrun error; Bit 10 (HTO): Data starvation by host timeout (HTO); Bit 9 (DTRO): Data read timeout; Bit 8 (RTO): Response timeout; Bit 7 (DCRC): Data CRC error; Bit 6 (RCRC): Response CRC error; Bit 5 (RXDR): Receive FIFO data request; Bit 4 (TXDR): Transmit FIFO data request; Bit 3 (DTO): Data transfer over; Bit 2 (CD): Command done; Bit 1 (RE): Response error; Bit 0 (CD): Card detect."]
pub type INT_STATUS_RAW_R = crate::FieldReader<u16, u16>;
#[doc = "Field `INT_STATUS_RAW` writer - Setting a bit clears the corresponding interrupt and writing 0 has no effect. Bits are logged regardless of interrupt mask status. Bit 15 (EBE): End-bit error/no CRC error; Bit 14 (ACD): Auto command done; Bit 13 (SBE/BCI): RX Start Bit Error; Bit 12 (HLE): Hardware locked write error; Bit 11 (FRUN): FIFO underrun/overrun error; Bit 10 (HTO): Data starvation by host timeout (HTO); Bit 9 (DTRO): Data read timeout; Bit 8 (RTO): Response timeout; Bit 7 (DCRC): Data CRC error; Bit 6 (RCRC): Response CRC error; Bit 5 (RXDR): Receive FIFO data request; Bit 4 (TXDR): Transmit FIFO data request; Bit 3 (DTO): Data transfer over; Bit 2 (CD): Command done; Bit 1 (RE): Response error; Bit 0 (CD): Card detect."]
pub type INT_STATUS_RAW_W<'a, const O: u8> =
    crate::FieldWriter<'a, u32, RINTSTS_SPEC, u16, u16, 16, O>;
#[doc = "Field `SDIO_INTERRUPT_RAW` reader - Interrupt from SDIO card, one bit for each card. Bit\\[17:16\\] correspond to card1 and card0, respectively. Setting a bit clears the corresponding interrupt bit and writing 0 has no effect. 0: No SDIO interrupt from card; 1: SDIO interrupt from card."]
pub type SDIO_INTERRUPT_RAW_R = crate::FieldReader<u8, u8>;
#[doc = "Field `SDIO_INTERRUPT_RAW` writer - Interrupt from SDIO card, one bit for each card. Bit\\[17:16\\] correspond to card1 and card0, respectively. Setting a bit clears the corresponding interrupt bit and writing 0 has no effect. 0: No SDIO interrupt from card; 1: SDIO interrupt from card."]
pub type SDIO_INTERRUPT_RAW_W<'a, const O: u8> =
    crate::FieldWriter<'a, u32, RINTSTS_SPEC, u8, u8, 2, O>;
impl R {
    #[doc = "Bits 0:15 - Setting a bit clears the corresponding interrupt and writing 0 has no effect. Bits are logged regardless of interrupt mask status. Bit 15 (EBE): End-bit error/no CRC error; Bit 14 (ACD): Auto command done; Bit 13 (SBE/BCI): RX Start Bit Error; Bit 12 (HLE): Hardware locked write error; Bit 11 (FRUN): FIFO underrun/overrun error; Bit 10 (HTO): Data starvation by host timeout (HTO); Bit 9 (DTRO): Data read timeout; Bit 8 (RTO): Response timeout; Bit 7 (DCRC): Data CRC error; Bit 6 (RCRC): Response CRC error; Bit 5 (RXDR): Receive FIFO data request; Bit 4 (TXDR): Transmit FIFO data request; Bit 3 (DTO): Data transfer over; Bit 2 (CD): Command done; Bit 1 (RE): Response error; Bit 0 (CD): Card detect."]
    #[inline(always)]
    pub fn int_status_raw(&self) -> INT_STATUS_RAW_R {
        INT_STATUS_RAW_R::new((self.bits & 0xffff) as u16)
    }
    #[doc = "Bits 16:17 - Interrupt from SDIO card, one bit for each card. Bit\\[17:16\\] correspond to card1 and card0, respectively. Setting a bit clears the corresponding interrupt bit and writing 0 has no effect. 0: No SDIO interrupt from card; 1: SDIO interrupt from card."]
    #[inline(always)]
    pub fn sdio_interrupt_raw(&self) -> SDIO_INTERRUPT_RAW_R {
        SDIO_INTERRUPT_RAW_R::new(((self.bits >> 16) & 3) as u8)
    }
}
impl W {
    #[doc = "Bits 0:15 - Setting a bit clears the corresponding interrupt and writing 0 has no effect. Bits are logged regardless of interrupt mask status. Bit 15 (EBE): End-bit error/no CRC error; Bit 14 (ACD): Auto command done; Bit 13 (SBE/BCI): RX Start Bit Error; Bit 12 (HLE): Hardware locked write error; Bit 11 (FRUN): FIFO underrun/overrun error; Bit 10 (HTO): Data starvation by host timeout (HTO); Bit 9 (DTRO): Data read timeout; Bit 8 (RTO): Response timeout; Bit 7 (DCRC): Data CRC error; Bit 6 (RCRC): Response CRC error; Bit 5 (RXDR): Receive FIFO data request; Bit 4 (TXDR): Transmit FIFO data request; Bit 3 (DTO): Data transfer over; Bit 2 (CD): Command done; Bit 1 (RE): Response error; Bit 0 (CD): Card detect."]
    #[inline(always)]
    pub fn int_status_raw(&mut self) -> INT_STATUS_RAW_W<0> {
        INT_STATUS_RAW_W::new(self)
    }
    #[doc = "Bits 16:17 - Interrupt from SDIO card, one bit for each card. Bit\\[17:16\\] correspond to card1 and card0, respectively. Setting a bit clears the corresponding interrupt bit and writing 0 has no effect. 0: No SDIO interrupt from card; 1: SDIO interrupt from card."]
    #[inline(always)]
    pub fn sdio_interrupt_raw(&mut self) -> SDIO_INTERRUPT_RAW_W<16> {
        SDIO_INTERRUPT_RAW_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "Raw interrupt status register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [rintsts](index.html) module"]
pub struct RINTSTS_SPEC;
impl crate::RegisterSpec for RINTSTS_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [rintsts::R](R) reader structure"]
impl crate::Readable for RINTSTS_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [rintsts::W](W) writer structure"]
impl crate::Writable for RINTSTS_SPEC {
    type Writer = W;
}
#[doc = "`reset()` method sets RINTSTS to value 0"]
impl crate::Resettable for RINTSTS_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0
    }
}