#[doc = "Register `CTRL` reader"]
pub struct R(crate::R<CTRL_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<CTRL_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<CTRL_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<CTRL_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `CTRL` writer"]
pub struct W(crate::W<CTRL_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<CTRL_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<CTRL_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<CTRL_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `FCS_CRC_EN` reader - For SPI1 initialize crc32 module before writing encrypted data to flash. Active low."]
pub struct FCS_CRC_EN_R(crate::FieldReader<bool, bool>);
impl FCS_CRC_EN_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        FCS_CRC_EN_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for FCS_CRC_EN_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `FCS_CRC_EN` writer - For SPI1 initialize crc32 module before writing encrypted data to flash. Active low."]
pub struct FCS_CRC_EN_W<'a> {
    w: &'a mut W,
}
impl<'a> FCS_CRC_EN_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 10)) | ((value as u32 & 1) << 10);
        self.w
    }
}
#[doc = "Field `TX_CRC_EN` reader - For SPI1 enable crc32 when writing encrypted data to flash. 1: enable 0:disable"]
pub struct TX_CRC_EN_R(crate::FieldReader<bool, bool>);
impl TX_CRC_EN_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        TX_CRC_EN_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for TX_CRC_EN_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `TX_CRC_EN` writer - For SPI1 enable crc32 when writing encrypted data to flash. 1: enable 0:disable"]
pub struct TX_CRC_EN_W<'a> {
    w: &'a mut W,
}
impl<'a> TX_CRC_EN_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 11)) | ((value as u32 & 1) << 11);
        self.w
    }
}
#[doc = "Field `WAIT_FLASH_IDLE_EN` reader - wait flash idle when program flash or erase flash. 1: enable 0: disable."]
pub struct WAIT_FLASH_IDLE_EN_R(crate::FieldReader<bool, bool>);
impl WAIT_FLASH_IDLE_EN_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        WAIT_FLASH_IDLE_EN_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for WAIT_FLASH_IDLE_EN_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `WAIT_FLASH_IDLE_EN` writer - wait flash idle when program flash or erase flash. 1: enable 0: disable."]
pub struct WAIT_FLASH_IDLE_EN_W<'a> {
    w: &'a mut W,
}
impl<'a> WAIT_FLASH_IDLE_EN_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 12)) | ((value as u32 & 1) << 12);
        self.w
    }
}
#[doc = "Field `FASTRD_MODE` reader - This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout and spi_fread_dout. 1: enable 0: disable."]
pub struct FASTRD_MODE_R(crate::FieldReader<bool, bool>);
impl FASTRD_MODE_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        FASTRD_MODE_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for FASTRD_MODE_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `FASTRD_MODE` writer - This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout and spi_fread_dout. 1: enable 0: disable."]
pub struct FASTRD_MODE_W<'a> {
    w: &'a mut W,
}
impl<'a> FASTRD_MODE_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 13)) | ((value as u32 & 1) << 13);
        self.w
    }
}
#[doc = "Field `FREAD_DUAL` reader - In the read operations read-data phase apply 2 signals. 1: enable 0: disable."]
pub struct FREAD_DUAL_R(crate::FieldReader<bool, bool>);
impl FREAD_DUAL_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        FREAD_DUAL_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for FREAD_DUAL_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `FREAD_DUAL` writer - In the read operations read-data phase apply 2 signals. 1: enable 0: disable."]
pub struct FREAD_DUAL_W<'a> {
    w: &'a mut W,
}
impl<'a> FREAD_DUAL_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 14)) | ((value as u32 & 1) << 14);
        self.w
    }
}
#[doc = "Field `RESANDRES` reader - The Device ID is read out to SPI_RD_STATUS register, this bit combine with spi_flash_res bit. 1: enable 0: disable."]
pub struct RESANDRES_R(crate::FieldReader<bool, bool>);
impl RESANDRES_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RESANDRES_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RESANDRES_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `RESANDRES` writer - The Device ID is read out to SPI_RD_STATUS register, this bit combine with spi_flash_res bit. 1: enable 0: disable."]
pub struct RESANDRES_W<'a> {
    w: &'a mut W,
}
impl<'a> RESANDRES_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 15)) | ((value as u32 & 1) << 15);
        self.w
    }
}
#[doc = "Field `FREAD_QUAD` reader - In the read operations read-data phase apply 4 signals. 1: enable 0: disable."]
pub struct FREAD_QUAD_R(crate::FieldReader<bool, bool>);
impl FREAD_QUAD_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        FREAD_QUAD_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for FREAD_QUAD_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `FREAD_QUAD` writer - In the read operations read-data phase apply 4 signals. 1: enable 0: disable."]
pub struct FREAD_QUAD_W<'a> {
    w: &'a mut W,
}
impl<'a> FREAD_QUAD_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 20)) | ((value as u32 & 1) << 20);
        self.w
    }
}
#[doc = "Field `WP` reader - Write protect signal output when SPI is idle. 1: output high 0: output low."]
pub struct WP_R(crate::FieldReader<bool, bool>);
impl WP_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        WP_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for WP_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `WP` writer - Write protect signal output when SPI is idle. 1: output high 0: output low."]
pub struct WP_W<'a> {
    w: &'a mut W,
}
impl<'a> WP_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 21)) | ((value as u32 & 1) << 21);
        self.w
    }
}
#[doc = "Field `WRSR_2B` reader - two bytes data will be written to status register when it is set. 1: enable 0: disable."]
pub struct WRSR_2B_R(crate::FieldReader<bool, bool>);
impl WRSR_2B_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        WRSR_2B_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for WRSR_2B_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `WRSR_2B` writer - two bytes data will be written to status register when it is set. 1: enable 0: disable."]
pub struct WRSR_2B_W<'a> {
    w: &'a mut W,
}
impl<'a> WRSR_2B_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 22)) | ((value as u32 & 1) << 22);
        self.w
    }
}
#[doc = "Field `FREAD_DIO` reader - In the read operations address phase and read-data phase apply 2 signals. 1: enable 0: disable."]
pub struct FREAD_DIO_R(crate::FieldReader<bool, bool>);
impl FREAD_DIO_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        FREAD_DIO_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for FREAD_DIO_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `FREAD_DIO` writer - In the read operations address phase and read-data phase apply 2 signals. 1: enable 0: disable."]
pub struct FREAD_DIO_W<'a> {
    w: &'a mut W,
}
impl<'a> FREAD_DIO_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 23)) | ((value as u32 & 1) << 23);
        self.w
    }
}
#[doc = "Field `FREAD_QIO` reader - In the read operations address phase and read-data phase apply 4 signals. 1: enable 0: disable."]
pub struct FREAD_QIO_R(crate::FieldReader<bool, bool>);
impl FREAD_QIO_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        FREAD_QIO_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for FREAD_QIO_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `FREAD_QIO` writer - In the read operations address phase and read-data phase apply 4 signals. 1: enable 0: disable."]
pub struct FREAD_QIO_W<'a> {
    w: &'a mut W,
}
impl<'a> FREAD_QIO_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 24)) | ((value as u32 & 1) << 24);
        self.w
    }
}
#[doc = "Field `RD_BIT_ORDER` reader - In read-data (MISO) phase 1: LSB first 0: MSB first"]
pub struct RD_BIT_ORDER_R(crate::FieldReader<bool, bool>);
impl RD_BIT_ORDER_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RD_BIT_ORDER_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RD_BIT_ORDER_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `RD_BIT_ORDER` writer - In read-data (MISO) phase 1: LSB first 0: MSB first"]
pub struct RD_BIT_ORDER_W<'a> {
    w: &'a mut W,
}
impl<'a> RD_BIT_ORDER_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 25)) | ((value as u32 & 1) << 25);
        self.w
    }
}
#[doc = "Field `WR_BIT_ORDER` reader - In command address write-data (MOSI) phases 1: LSB firs 0: MSB first"]
pub struct WR_BIT_ORDER_R(crate::FieldReader<bool, bool>);
impl WR_BIT_ORDER_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        WR_BIT_ORDER_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for WR_BIT_ORDER_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `WR_BIT_ORDER` writer - In command address write-data (MOSI) phases 1: LSB firs 0: MSB first"]
pub struct WR_BIT_ORDER_W<'a> {
    w: &'a mut W,
}
impl<'a> WR_BIT_ORDER_W<'a> {
    #[doc = r"Sets the field bit"]
    #[inline(always)]
    pub fn set_bit(self) -> &'a mut W {
        self.bit(true)
    }
    #[doc = r"Clears the field bit"]
    #[inline(always)]
    pub fn clear_bit(self) -> &'a mut W {
        self.bit(false)
    }
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub fn bit(self, value: bool) -> &'a mut W {
        self.w.bits = (self.w.bits & !(1 << 26)) | ((value as u32 & 1) << 26);
        self.w
    }
}
impl R {
    #[doc = "Bit 10 - For SPI1 initialize crc32 module before writing encrypted data to flash. Active low."]
    #[inline(always)]
    pub fn fcs_crc_en(&self) -> FCS_CRC_EN_R {
        FCS_CRC_EN_R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 11 - For SPI1 enable crc32 when writing encrypted data to flash. 1: enable 0:disable"]
    #[inline(always)]
    pub fn tx_crc_en(&self) -> TX_CRC_EN_R {
        TX_CRC_EN_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bit 12 - wait flash idle when program flash or erase flash. 1: enable 0: disable."]
    #[inline(always)]
    pub fn wait_flash_idle_en(&self) -> WAIT_FLASH_IDLE_EN_R {
        WAIT_FLASH_IDLE_EN_R::new(((self.bits >> 12) & 1) != 0)
    }
    #[doc = "Bit 13 - This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout and spi_fread_dout. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fastrd_mode(&self) -> FASTRD_MODE_R {
        FASTRD_MODE_R::new(((self.bits >> 13) & 1) != 0)
    }
    #[doc = "Bit 14 - In the read operations read-data phase apply 2 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_dual(&self) -> FREAD_DUAL_R {
        FREAD_DUAL_R::new(((self.bits >> 14) & 1) != 0)
    }
    #[doc = "Bit 15 - The Device ID is read out to SPI_RD_STATUS register, this bit combine with spi_flash_res bit. 1: enable 0: disable."]
    #[inline(always)]
    pub fn resandres(&self) -> RESANDRES_R {
        RESANDRES_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 20 - In the read operations read-data phase apply 4 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_quad(&self) -> FREAD_QUAD_R {
        FREAD_QUAD_R::new(((self.bits >> 20) & 1) != 0)
    }
    #[doc = "Bit 21 - Write protect signal output when SPI is idle. 1: output high 0: output low."]
    #[inline(always)]
    pub fn wp(&self) -> WP_R {
        WP_R::new(((self.bits >> 21) & 1) != 0)
    }
    #[doc = "Bit 22 - two bytes data will be written to status register when it is set. 1: enable 0: disable."]
    #[inline(always)]
    pub fn wrsr_2b(&self) -> WRSR_2B_R {
        WRSR_2B_R::new(((self.bits >> 22) & 1) != 0)
    }
    #[doc = "Bit 23 - In the read operations address phase and read-data phase apply 2 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_dio(&self) -> FREAD_DIO_R {
        FREAD_DIO_R::new(((self.bits >> 23) & 1) != 0)
    }
    #[doc = "Bit 24 - In the read operations address phase and read-data phase apply 4 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_qio(&self) -> FREAD_QIO_R {
        FREAD_QIO_R::new(((self.bits >> 24) & 1) != 0)
    }
    #[doc = "Bit 25 - In read-data (MISO) phase 1: LSB first 0: MSB first"]
    #[inline(always)]
    pub fn rd_bit_order(&self) -> RD_BIT_ORDER_R {
        RD_BIT_ORDER_R::new(((self.bits >> 25) & 1) != 0)
    }
    #[doc = "Bit 26 - In command address write-data (MOSI) phases 1: LSB firs 0: MSB first"]
    #[inline(always)]
    pub fn wr_bit_order(&self) -> WR_BIT_ORDER_R {
        WR_BIT_ORDER_R::new(((self.bits >> 26) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 10 - For SPI1 initialize crc32 module before writing encrypted data to flash. Active low."]
    #[inline(always)]
    pub fn fcs_crc_en(&mut self) -> FCS_CRC_EN_W {
        FCS_CRC_EN_W { w: self }
    }
    #[doc = "Bit 11 - For SPI1 enable crc32 when writing encrypted data to flash. 1: enable 0:disable"]
    #[inline(always)]
    pub fn tx_crc_en(&mut self) -> TX_CRC_EN_W {
        TX_CRC_EN_W { w: self }
    }
    #[doc = "Bit 12 - wait flash idle when program flash or erase flash. 1: enable 0: disable."]
    #[inline(always)]
    pub fn wait_flash_idle_en(&mut self) -> WAIT_FLASH_IDLE_EN_W {
        WAIT_FLASH_IDLE_EN_W { w: self }
    }
    #[doc = "Bit 13 - This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout and spi_fread_dout. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fastrd_mode(&mut self) -> FASTRD_MODE_W {
        FASTRD_MODE_W { w: self }
    }
    #[doc = "Bit 14 - In the read operations read-data phase apply 2 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_dual(&mut self) -> FREAD_DUAL_W {
        FREAD_DUAL_W { w: self }
    }
    #[doc = "Bit 15 - The Device ID is read out to SPI_RD_STATUS register, this bit combine with spi_flash_res bit. 1: enable 0: disable."]
    #[inline(always)]
    pub fn resandres(&mut self) -> RESANDRES_W {
        RESANDRES_W { w: self }
    }
    #[doc = "Bit 20 - In the read operations read-data phase apply 4 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_quad(&mut self) -> FREAD_QUAD_W {
        FREAD_QUAD_W { w: self }
    }
    #[doc = "Bit 21 - Write protect signal output when SPI is idle. 1: output high 0: output low."]
    #[inline(always)]
    pub fn wp(&mut self) -> WP_W {
        WP_W { w: self }
    }
    #[doc = "Bit 22 - two bytes data will be written to status register when it is set. 1: enable 0: disable."]
    #[inline(always)]
    pub fn wrsr_2b(&mut self) -> WRSR_2B_W {
        WRSR_2B_W { w: self }
    }
    #[doc = "Bit 23 - In the read operations address phase and read-data phase apply 2 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_dio(&mut self) -> FREAD_DIO_W {
        FREAD_DIO_W { w: self }
    }
    #[doc = "Bit 24 - In the read operations address phase and read-data phase apply 4 signals. 1: enable 0: disable."]
    #[inline(always)]
    pub fn fread_qio(&mut self) -> FREAD_QIO_W {
        FREAD_QIO_W { w: self }
    }
    #[doc = "Bit 25 - In read-data (MISO) phase 1: LSB first 0: MSB first"]
    #[inline(always)]
    pub fn rd_bit_order(&mut self) -> RD_BIT_ORDER_W {
        RD_BIT_ORDER_W { w: self }
    }
    #[doc = "Bit 26 - In command address write-data (MOSI) phases 1: LSB firs 0: MSB first"]
    #[inline(always)]
    pub fn wr_bit_order(&mut self) -> WR_BIT_ORDER_W {
        WR_BIT_ORDER_W { w: self }
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "\n\nThis register you can [`read`]
(crate::generic::Reg::read), [`write_with_zero`]
(crate::generic::Reg::write_with_zero), [`reset`]
(crate::generic::Reg::reset), [`write`]
(crate::generic::Reg::write), [`modify`]
(crate::generic::Reg::modify). See [API]
(https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ctrl]
(index.html) module"]
pub struct CTRL_SPEC;
impl crate::RegisterSpec for CTRL_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [ctrl::R]
(R) reader structure"]
impl crate::Readable for CTRL_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ctrl::W]
(W) writer structure"]
impl crate::Writable for CTRL_SPEC {
    type Writer = W;
}
#[doc = "`reset()` method sets CTRL to value 0x0020_a400"]
impl crate::Resettable for CTRL_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0x0020_a400
    }
}