Expand description
Structs
Field AT_CMD_CHAR_DET_INT_RAW reader - This interrupt raw bit turns to high level when receiver detects the configured at_cmd chars.
Field BRK_DET_INT_RAW reader - This interrupt raw bit turns to high level when receiver detects the 0 after the stop bit.
Field CTS_CHG_INT_RAW reader - This interrupt raw bit turns to high level when receiver detects the edge change of ctsn signal.
Field DSR_CHG_INT_RAW reader - This interrupt raw bit turns to high level when receiver detects the edge change of dsrn signal.
Field FRM_ERR_INT_RAW reader - This interrupt raw bit turns to high level when receiver detects data’s frame error .
Field GLITCH_DET_INT_RAW reader - This interrupt raw bit turns to high level when receiver detects the start bit.
This register you can [read]
(crate::generic::Reg::read). See [API]
(https://docs.rs/svd2rust/#read–modify–write-api).
Field PARITY_ERR_INT_RAW reader - This interrupt raw bit turns to high level when receiver detects the parity error of data.
Register INT_RAW reader
Field RS485_CLASH_INT_RAW reader - This interrupt raw bit turns to high level when rs485 detects the clash between transmitter and receiver.
Field RS485_FRM_ERR_INT_RAW reader - This interrupt raw bit turns to high level when rs485 detects the data frame error.
Field RS485_PARITY_ERR_INT_RAW reader - This interrupt raw bit turns to high level when rs485 detects the parity error.
Field RXFIFO_FULL_INT_RAW reader - This interrupt raw bit turns to high level when receiver receives more data than (rx_flow_thrhd_h3 rx_flow_thrhd).
Field RXFIFO_OVF_INT_RAW reader - This interrupt raw bit turns to high level when receiver receives more data than the fifo can store.
Field RXFIFO_TOUT_INT_RAW reader - This interrupt raw bit turns to high level when receiver takes more time than rx_tout_thrhd to receive a byte.
Field SW_XOFF_INT_RAW reader - This interrupt raw bit turns to high level when receiver receives xon char with uart_sw_flow_con_en is set to 1.
Field SW_XON_INT_RAW reader - This interrupt raw bit turns to high level when receiver receives xoff char with uart_sw_flow_con_en is set to 1.
Field TXFIFO_EMPTY_INT_RAW reader - This interrupt raw bit turns to high level when the amount of data in transmitter’s fifo is less than ((tx_mem_cnttxfifo_cnt) .
Field TX_BRK_DONE_INT_RAW reader - This interrupt raw bit turns to high level when transmitter completes sendding 0 after all the datas in transmitter’s fifo are send.
Field TX_BRK_IDLE_DONE_INT_RAW reader - This interrupt raw bit turns to high level when transmitter has kept the shortest duration after the last data has been send.
Field TX_DONE_INT_RAW reader - This interrupt raw bit turns to high level when transmitter has send all the data in fifo.