[−][src]Struct esp32::uart::RegisterBlock

#[repr(C)]pub struct RegisterBlock {
    pub rx_fifo: Reg<RX_FIFO_SPEC>,
    pub int_raw: Reg<INT_RAW_SPEC>,
    pub int_st: Reg<INT_ST_SPEC>,
    pub int_ena: Reg<INT_ENA_SPEC>,
    pub int_clr: Reg<INT_CLR_SPEC>,
    pub clkdiv: Reg<CLKDIV_SPEC>,
    pub autobaud: Reg<AUTOBAUD_SPEC>,
    pub status: Reg<STATUS_SPEC>,
    pub conf0: Reg<CONF0_SPEC>,
    pub conf1: Reg<CONF1_SPEC>,
    pub lowpulse: Reg<LOWPULSE_SPEC>,
    pub highpulse: Reg<HIGHPULSE_SPEC>,
    pub rxd_cnt: Reg<RXD_CNT_SPEC>,
    pub flow_conf: Reg<FLOW_CONF_SPEC>,
    pub sleep_conf: Reg<SLEEP_CONF_SPEC>,
    pub swfc_conf: Reg<SWFC_CONF_SPEC>,
    pub idle_conf: Reg<IDLE_CONF_SPEC>,
    pub rs485_conf: Reg<RS485_CONF_SPEC>,
    pub at_cmd_precnt: Reg<AT_CMD_PRECNT_SPEC>,
    pub at_cmd_postcnt: Reg<AT_CMD_POSTCNT_SPEC>,
    pub at_cmd_gaptout: Reg<AT_CMD_GAPTOUT_SPEC>,
    pub at_cmd_char: Reg<AT_CMD_CHAR_SPEC>,
    pub mem_conf: Reg<MEM_CONF_SPEC>,
    pub mem_tx_status: Reg<MEM_TX_STATUS_SPEC>,
    pub mem_rx_status: Reg<MEM_RX_STATUS_SPEC>,
    pub mem_cnt_status: Reg<MEM_CNT_STATUS_SPEC>,
    pub pospulse: Reg<POSPULSE_SPEC>,
    pub negpulse: Reg<NEGPULSE_SPEC>,
    pub date: Reg<DATE_SPEC>,
    pub id: Reg<ID_SPEC>,
    pub tx_fifo: Reg<TX_FIFO_SPEC>,
    // some fields omitted
}

Register block

Fields

rx_fifo: Reg<RX_FIFO_SPEC>

0x00 - UART_RX_FIFO

int_raw: Reg<INT_RAW_SPEC>

0x04 - UART_INT_RAW

int_st: Reg<INT_ST_SPEC>

0x08 - UART_INT_ST

int_ena: Reg<INT_ENA_SPEC>

0x0c - UART_INT_ENA

int_clr: Reg<INT_CLR_SPEC>

0x10 - UART_INT_CLR

clkdiv: Reg<CLKDIV_SPEC>

0x14 - UART_CLKDIV

autobaud: Reg<AUTOBAUD_SPEC>

0x18 - UART_AUTOBAUD

status: Reg<STATUS_SPEC>

0x1c - UART_STATUS

conf0: Reg<CONF0_SPEC>

0x20 - UART_CONF0

conf1: Reg<CONF1_SPEC>

0x24 - UART_CONF1

lowpulse: Reg<LOWPULSE_SPEC>

0x28 - UART_LOWPULSE

highpulse: Reg<HIGHPULSE_SPEC>

0x2c - UART_HIGHPULSE

rxd_cnt: Reg<RXD_CNT_SPEC>

0x30 - UART_RXD_CNT

flow_conf: Reg<FLOW_CONF_SPEC>

0x34 - UART_FLOW_CONF

sleep_conf: Reg<SLEEP_CONF_SPEC>

0x38 - UART_SLEEP_CONF

swfc_conf: Reg<SWFC_CONF_SPEC>

0x3c - UART_SWFC_CONF

idle_conf: Reg<IDLE_CONF_SPEC>

0x40 - UART_IDLE_CONF

rs485_conf: Reg<RS485_CONF_SPEC>

0x44 - UART_RS485_CONF

at_cmd_precnt: Reg<AT_CMD_PRECNT_SPEC>

0x48 - UART_AT_CMD_PRECNT

at_cmd_postcnt: Reg<AT_CMD_POSTCNT_SPEC>

0x4c - UART_AT_CMD_POSTCNT

at_cmd_gaptout: Reg<AT_CMD_GAPTOUT_SPEC>

0x50 - UART_AT_CMD_GAPTOUT

at_cmd_char: Reg<AT_CMD_CHAR_SPEC>

0x54 - UART_AT_CMD_CHAR

mem_conf: Reg<MEM_CONF_SPEC>

0x58 - UART_MEM_CONF

mem_tx_status: Reg<MEM_TX_STATUS_SPEC>

0x5c - UART_MEM_TX_STATUS

mem_rx_status: Reg<MEM_RX_STATUS_SPEC>

0x60 - UART_MEM_RX_STATUS

mem_cnt_status: Reg<MEM_CNT_STATUS_SPEC>

0x64 - UART_MEM_CNT_STATUS

pospulse: Reg<POSPULSE_SPEC>

0x68 - UART_POSPULSE

negpulse: Reg<NEGPULSE_SPEC>

0x6c - UART_NEGPULSE

date: Reg<DATE_SPEC>

0x78 - UART_DATE

id: Reg<ID_SPEC>

0x7c - UART_ID

tx_fifo: Reg<TX_FIFO_SPEC>

0x200c0000 - UART_TX_FIFO

Auto Trait Implementations

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized, [src]

impl<T> Borrow<T> for T where
    T: ?Sized, [src]

impl<T> BorrowMut<T> for T where
    T: ?Sized, [src]

impl<T> From<T> for T[src]

impl<T, U> Into<U> for T where
    U: From<T>, [src]

impl<T, U> TryFrom<U> for T where
    U: Into<T>, [src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.