Type Definition esp32::rtcio::rtc_io_touch_pad3_reg::R

type R = R<u32, RTC_IO_TOUCH_PAD3_REG>;

Reader of register RTC_IO_TOUCH_PAD3_REG

Methods

impl R

pub fn rtc_io_touch_pad3_hold(&self) -> RTC_IO_TOUCH_PAD3_HOLD_R

Bit 31 - hold the current value of the output when setting the hold to Ò1Ó

pub fn rtc_io_touch_pad3_drv(&self) -> RTC_IO_TOUCH_PAD3_DRV_R

Bits 29:30 - the driver strength of the pad

pub fn rtc_io_touch_pad3_rde(&self) -> RTC_IO_TOUCH_PAD3_RDE_R

Bit 28 - the pull down enable of the pad

pub fn rtc_io_touch_pad3_rue(&self) -> RTC_IO_TOUCH_PAD3_RUE_R

Bit 27 - the pull up enable of the pad

pub fn rtc_io_touch_pad3_dac(&self) -> RTC_IO_TOUCH_PAD3_DAC_R

Bits 23:25 - touch sensor slope control. 3-bit for each touch panel default 100.

pub fn rtc_io_touch_pad3_start(&self) -> RTC_IO_TOUCH_PAD3_START_R

Bit 22 - start touch sensor.

pub fn rtc_io_touch_pad3_tie_opt(&self) -> RTC_IO_TOUCH_PAD3_TIE_OPT_R

Bit 21 - default touch sensor tie option. 0: tie low 1: tie high.

pub fn rtc_io_touch_pad3_xpd(&self) -> RTC_IO_TOUCH_PAD3_XPD_R

Bit 20 - touch sensor power on.

pub fn rtc_io_touch_pad3_mux_sel(&self) -> RTC_IO_TOUCH_PAD3_MUX_SEL_R

Bit 19 - Ò1Ó select the digital function Ó0Óslection the rtc function

pub fn rtc_io_touch_pad3_fun_sel(&self) -> RTC_IO_TOUCH_PAD3_FUN_SEL_R

Bits 17:18 - the functional selection signal of the pad

pub fn rtc_io_touch_pad3_slp_sel(&self) -> RTC_IO_TOUCH_PAD3_SLP_SEL_R

Bit 16 - the sleep status selection signal of the pad

pub fn rtc_io_touch_pad3_slp_ie(&self) -> RTC_IO_TOUCH_PAD3_SLP_IE_R

Bit 15 - the input enable of the pad in sleep status

pub fn rtc_io_touch_pad3_slp_oe(&self) -> RTC_IO_TOUCH_PAD3_SLP_OE_R

Bit 14 - the output enable of the pad in sleep status

pub fn rtc_io_touch_pad3_fun_ie(&self) -> RTC_IO_TOUCH_PAD3_FUN_IE_R

Bit 13 - the input enable of the pad

pub fn rtc_io_touch_pad3_to_gpio(&self) -> RTC_IO_TOUCH_PAD3_TO_GPIO_R

Bit 12 - connect the rtc pad input to digital pad input Ó0Ó is availbale.MTDO