[−][src]Type Definition esp32::ledc::ledc_lsch1_conf1_reg::R
type R = R<u32, LEDC_LSCH1_CONF1_REG>;
Reader of register LEDC_LSCH1_CONF1_REG
Methods
impl R
[src]
pub fn ledc_duty_start_lsch1(&self) -> LEDC_DUTY_START_LSCH1_R
[src]
Bit 31 - When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1 has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.
pub fn ledc_duty_inc_lsch1(&self) -> LEDC_DUTY_INC_LSCH1_R
[src]
Bit 30 - This register is used to increase the duty of output signal or decrease the duty of output signal for low speed channel1.
pub fn ledc_duty_num_lsch1(&self) -> LEDC_DUTY_NUM_LSCH1_R
[src]
Bits 20:29 - This register is used to control the num of increased or decreased times for low speed channel1.
pub fn ledc_duty_cycle_lsch1(&self) -> LEDC_DUTY_CYCLE_LSCH1_R
[src]
Bits 10:19 - This register is used to increase or decrease the duty every reg_duty_cycle_lsch1 cycles for low speed channel1.
pub fn ledc_duty_scale_lsch1(&self) -> LEDC_DUTY_SCALE_LSCH1_R
[src]
Bits 0:9 - This register controls the increase or decrease step scale for low speed channel1.