[−][src]Type Definition esp32::ledc::ledc_hsch0_conf1_reg::W
type W = W<u32, LEDC_HSCH0_CONF1_REG>;
Writer for register LEDC_HSCH0_CONF1_REG
Methods
impl W
[src]
pub fn ledc_duty_start_hsch0(&mut self) -> LEDC_DUTY_START_HSCH0_W
[src]
Bit 31 - When reg_duty_num_hsch0 reg_duty_cycle_hsch0 and reg_duty_scale_hsch0 has been configured. these register won't take effect until set reg_duty_start_hsch0. this bit is automatically cleared by hardware.
pub fn ledc_duty_inc_hsch0(&mut self) -> LEDC_DUTY_INC_HSCH0_W
[src]
Bit 30 - This register is used to increase the duty of output signal or decrease the duty of output signal for high speed channel0.
pub fn ledc_duty_num_hsch0(&mut self) -> LEDC_DUTY_NUM_HSCH0_W
[src]
Bits 20:29 - This register is used to control the num of increased or decreased times for high speed channel0.
pub fn ledc_duty_cycle_hsch0(&mut self) -> LEDC_DUTY_CYCLE_HSCH0_W
[src]
Bits 10:19 - This register is used to increase or decrease the duty every reg_duty_cycle_hsch0 cycles for high speed channel0.
pub fn ledc_duty_scale_hsch0(&mut self) -> LEDC_DUTY_SCALE_HSCH0_W
[src]
Bits 0:9 - This register controls the increase or decrease step scale for high speed channel0.