Module esp32_hal::pac::sens::sar_touch_ctrl1

Structs

R

Register SAR_TOUCH_CTRL1 reader

SAR_TOUCH_CTRL1_SPEC

This register you can read, write_with_zero, reset, write, modify. See API.

W

Register SAR_TOUCH_CTRL1 writer

Type Definitions

HALL_PHASE_FORCE_R

Field HALL_PHASE_FORCE reader - 1: HALL PHASE is controlled by SW 0: HALL PHASE is controlled by FSM in ULP-coprocessor

HALL_PHASE_FORCE_W

Field HALL_PHASE_FORCE writer - 1: HALL PHASE is controlled by SW 0: HALL PHASE is controlled by FSM in ULP-coprocessor

TOUCH_MEAS_DELAY_R

Field TOUCH_MEAS_DELAY reader - the meas length (in 8MHz)

TOUCH_MEAS_DELAY_W

Field TOUCH_MEAS_DELAY writer - the meas length (in 8MHz)

TOUCH_OUT_1EN_R

Field TOUCH_OUT_1EN reader - 1: wakeup interrupt is generated if SET1 is “touched” 0: wakeup interrupt is generated only if SET1 & SET2 is both “touched”

TOUCH_OUT_1EN_W

Field TOUCH_OUT_1EN writer - 1: wakeup interrupt is generated if SET1 is “touched” 0: wakeup interrupt is generated only if SET1 & SET2 is both “touched”

TOUCH_OUT_SEL_R

Field TOUCH_OUT_SEL reader - 1: when the counter is greater then the threshold the touch pad is considered as “touched” 0: when the counter is less than the threshold the touch pad is considered as “touched”

TOUCH_OUT_SEL_W

Field TOUCH_OUT_SEL writer - 1: when the counter is greater then the threshold the touch pad is considered as “touched” 0: when the counter is less than the threshold the touch pad is considered as “touched”

TOUCH_XPD_WAIT_R

Field TOUCH_XPD_WAIT reader - the waiting cycles (in 8MHz) between TOUCH_START and TOUCH_XPD

TOUCH_XPD_WAIT_W

Field TOUCH_XPD_WAIT writer - the waiting cycles (in 8MHz) between TOUCH_START and TOUCH_XPD

XPD_HALL_FORCE_R

Field XPD_HALL_FORCE reader - 1: XPD HALL is controlled by SW. 0: XPD HALL is controlled by FSM in ULP-coprocessor

XPD_HALL_FORCE_W

Field XPD_HALL_FORCE writer - 1: XPD HALL is controlled by SW. 0: XPD HALL is controlled by FSM in ULP-coprocessor