Struct esp32_hal::pac::rmt::int_ena::W

pub struct W(_);

Register INT_ENA writer

Implementations

impl W

pub unsafe fn ch_tx_end_int_ena<const O: u8>(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, O>

Set this bit to enable rmt_ch[0-7]_tx_end_int_st.

pub fn ch0_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 0>

Bit 0 - Set this bit to enable rmt_ch0_tx_end_int_st.

pub fn ch1_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 3>

Bit 3 - Set this bit to enable rmt_ch1_tx_end_int_st.

pub fn ch2_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 6>

Bit 6 - Set this bit to enable rmt_ch2_tx_end_int_st.

pub fn ch3_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 9>

Bit 9 - Set this bit to enable rmt_ch3_tx_end_int_st.

pub fn ch4_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 12>

Bit 12 - Set this bit to enable rmt_ch4_tx_end_int_st.

pub fn ch5_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 15>

Bit 15 - Set this bit to enable rmt_ch5_tx_end_int_st.

pub fn ch6_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 18>

Bit 18 - Set this bit to enable rmt_ch6_tx_end_int_st.

pub fn ch7_tx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 21>

Bit 21 - Set this bit to enable rmt_ch7_tx_end_int_st.

pub unsafe fn ch_rx_end_int_ena<const O: u8>(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, O>

Set this bit to enable rmt_ch[0-7]_rx_end_int_st.

pub fn ch0_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 1>

Bit 1 - Set this bit to enable rmt_ch0_rx_end_int_st.

pub fn ch1_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 4>

Bit 4 - Set this bit to enable rmt_ch1_rx_end_int_st.

pub fn ch2_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 7>

Bit 7 - Set this bit to enable rmt_ch2_rx_end_int_st.

pub fn ch3_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 10>

Bit 10 - Set this bit to enable rmt_ch3_rx_end_int_st.

pub fn ch4_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 13>

Bit 13 - Set this bit to enable rmt_ch4_rx_end_int_st.

pub fn ch5_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 16>

Bit 16 - Set this bit to enable rmt_ch5_rx_end_int_st.

pub fn ch6_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 19>

Bit 19 - Set this bit to enable rmt_ch6_rx_end_int_st.

pub fn ch7_rx_end_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 22>

Bit 22 - Set this bit to enable rmt_ch7_rx_end_int_st.

pub unsafe fn ch_err_int_ena<const O: u8>(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, O>

Set this bit to enable rmt_ch[0-7]_err_int_st.

pub fn ch0_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 2>

Bit 2 - Set this bit to enable rmt_ch0_err_int_st.

pub fn ch1_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 5>

Bit 5 - Set this bit to enable rmt_ch1_err_int_st.

pub fn ch2_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 8>

Bit 8 - Set this bit to enable rmt_ch2_err_int_st.

pub fn ch3_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 11>

Bit 11 - Set this bit to enable rmt_ch3_err_int_st.

pub fn ch4_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 14>

Bit 14 - Set this bit to enable rmt_ch4_err_int_st.

pub fn ch5_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 17>

Bit 17 - Set this bit to enable rmt_ch5_err_int_st.

pub fn ch6_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 20>

Bit 20 - Set this bit to enable rmt_ch6_err_int_st.

pub fn ch7_err_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 23>

Bit 23 - Set this bit to enable rmt_ch7_err_int_st.

pub unsafe fn ch_tx_thr_event_int_ena<const O: u8>(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, O>

Set this bit to enable rmt_ch[0-7]_tx_thr_event_int_st.

pub fn ch0_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 24>

Bit 24 - Set this bit to enable rmt_ch0_tx_thr_event_int_st.

pub fn ch1_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 25>

Bit 25 - Set this bit to enable rmt_ch1_tx_thr_event_int_st.

pub fn ch2_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 26>

Bit 26 - Set this bit to enable rmt_ch2_tx_thr_event_int_st.

pub fn ch3_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 27>

Bit 27 - Set this bit to enable rmt_ch3_tx_thr_event_int_st.

pub fn ch4_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 28>

Bit 28 - Set this bit to enable rmt_ch4_tx_thr_event_int_st.

pub fn ch5_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 29>

Bit 29 - Set this bit to enable rmt_ch5_tx_thr_event_int_st.

pub fn ch6_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 30>

Bit 30 - Set this bit to enable rmt_ch6_tx_thr_event_int_st.

pub fn ch7_tx_thr_event_int_ena(
    &mut self
) -> BitWriterRaw<'_, u32, INT_ENA_SPEC, bool, BitM, 31>

Bit 31 - Set this bit to enable rmt_ch7_tx_thr_event_int_st.

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<INT_ENA_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<INT_ENA_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<INT_ENA_SPEC>> for W

fn from(writer: W<INT_ENA_SPEC>) -> W

Converts to this type from the input type.