Struct esp32_hal::pac::io_mux::pin_ctrl::W

pub struct W(_);

Register PIN_CTRL writer

Implementations

impl W

pub fn clk1(
    &mut self
) -> FieldWriterRaw<'_, u32, PIN_CTRL_SPEC, u8, u8, Unsafe, 4, 0>

Bits 0:3 - If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0.

pub fn clk2(
    &mut self
) -> FieldWriterRaw<'_, u32, PIN_CTRL_SPEC, u8, u8, Unsafe, 4, 4>

Bits 4:7 - If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0.

pub fn clk3(
    &mut self
) -> FieldWriterRaw<'_, u32, PIN_CTRL_SPEC, u8, u8, Unsafe, 4, 8>

Bits 8:11 - If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0.

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<PIN_CTRL_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<PIN_CTRL_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<PIN_CTRL_SPEC>> for W

fn from(writer: W<PIN_CTRL_SPEC>) -> W

Converts to this type from the input type.