Struct esp32_hal::pac::io_mux::pin_ctrl::R

pub struct R(_);

Register PIN_CTRL reader

Implementations

impl R

pub fn clk1(&self) -> FieldReaderRaw<u8, u8>

Bits 0:3 - If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0.

pub fn clk2(&self) -> FieldReaderRaw<u8, u8>

Bits 4:7 - If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0.

pub fn clk3(&self) -> FieldReaderRaw<u8, u8>

Bits 8:11 - If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0.

Methods from Deref<Target = R<PIN_CTRL_SPEC>>

pub fn bits(&self) -> <REG as RegisterSpec>::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<PIN_CTRL_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<R as Deref>::Target

Dereferences the value.

impl From<R<PIN_CTRL_SPEC>> for R

fn from(reader: R<PIN_CTRL_SPEC>) -> R

Converts to this type from the input type.