Struct esp32_hal::pac::i2c0::int_clr::W

pub struct W(_);

Register INT_CLR writer

Implementations

impl W

pub fn rxfifo_full_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 0>

Bit 0 - Set this bit to clear the rxfifo_full_int interrupt.

pub fn txfifo_empty_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 1>

Bit 1 - Set this bit to clear the txfifo_empty_int interrupt.

pub fn rxfifo_ovf_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 2>

Bit 2 - Set this bit to clear the rxfifo_ovf_int interrupt.

pub fn end_detect_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 3>

Bit 3 - Set this bit to clear the end_detect_int interrupt.

pub fn slave_tran_comp_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 4>

Bit 4 - Set this bit to clear the slave_tran_comp_int interrupt.

pub fn arbitration_lost_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 5>

Bit 5 - Set this bit to clear the arbitration_lost_int interrupt.

pub fn master_tran_comp_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 6>

Bit 6 - Set this bit to clear the master_tran_comp interrupt.

pub fn trans_complete_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 7>

Bit 7 - Set this bit to clear the trans_complete_int interrupt.

pub fn time_out_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 8>

Bit 8 - Set this bit to clear the time_out_int interrupt.

pub fn trans_start_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 9>

Bit 9 - Set this bit to clear the trans_start_int interrupt.

pub fn ack_err_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 10>

Bit 10 - Set this bit to clear the ack_err_int interrupt.

pub fn rx_rec_full_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 11>

Bit 11 - Set this bit to clear the rx_rec_full_int interrupt.

pub fn tx_send_empty_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 12>

Bit 12 - Set this bit to clear the tx_send_empty_int interrupt.

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<INT_CLR_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<INT_CLR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<INT_CLR_SPEC>> for W

fn from(writer: W<INT_CLR_SPEC>) -> W

Converts to this type from the input type.