TMP102Async

embedded_devices::devices::texas_instruments::tmp102

Struct TMP102Async 

Source 
pub struct TMP102Async<D: DelayNs, I: RegisterInterfaceAsync> { /* private fields */ }
Expand description

The TMP102 is a general purpose digital temperature sensor. It provides a 13-bit temperature result with a resolution of 0.0625 °C and an accuracy of up to ±3 °C across the temperature range of –40 °C to 125 °C with no calibration.

For a full description and usage examples, refer to the module documentation.

Implementations§

Source§

impl<D, I> TMP102Async<D, I2cDeviceAsync<I, SevenBitAddress>>
where I: I2c<SevenBitAddress> + ErrorType, D: DelayNs,

Source

pub fn new_i2c(delay: D, interface: I, address: Address) -> Self

Initializes a new device with the given address on the specified bus. This consumes the I2C bus I.

Source§

impl<D: DelayNs, I: RegisterInterfaceAsync> TMP102Async<D, I>

Source

pub async fn read_temperature( &mut self, ) -> Result<ThermodynamicTemperature, TransportError<(), I::BusError>>

Read the last temperature measured

Source

pub async fn read_register<R>( &mut self, ) -> Result<R, TransportError<<R as Register>::CodecError, I::BusError>>
where R: ReadableRegister + TMP102Register,

Reads from the given register. For a list of all available registers, refer to implementors of TMP102Register.

Source

pub async fn write_register<R>( &mut self, register: impl AsRef<R>, ) -> Result<(), TransportError<<R as Register>::CodecError, I::BusError>>
where R: WritableRegister + TMP102Register,

Writes to the given register. For a list of all available registers, refer to implementors of TMP102Register.

Trait Implementations§

Source§

impl<D: DelayNs, I: RegisterInterfaceAsync> ContinuousSensorAsync for TMP102Async<D, I>

Source§

async fn start_measuring(&mut self) -> Result<(), Self::Error>

Starts continuous measurement.

Source§

async fn stop_measuring(&mut self) -> Result<(), Self::Error>

Stops continuous measurement.

Source§

async fn measurement_interval_us(&mut self) -> Result<u32, Self::Error>

Expected amount of time between measurements in microseconds.

Source§

async fn current_measurement( &mut self, ) -> Result<Option<Self::Measurement>, Self::Error>

Returns the most recent measurement. Will never return None.

Source§

async fn is_measurement_ready(&mut self) -> Result<bool, Self::Error>

Not supported, always returns true.

Source§

async fn next_measurement(&mut self) -> Result<Self::Measurement, Self::Error>

Opportunistically waits one conversion interval and returns the measurement.

Source§

type Error = TransportError<(), <I as RegisterInterfaceAsync>::BusError>

The error type which may occur on associated functions
Source§

type Measurement = Measurement

A type holding the measurements obtained by this sensor
Source§

impl<D: DelayNs, I: RegisterInterfaceAsync> OneshotSensorAsync for TMP102Async<D, I>

Source§

async fn measure(&mut self) -> Result<Self::Measurement, Self::Error>

Performs a one-shot measurement. This will set shutdown in [`self::registers::Configuration´]. which will cause the device to perform a single conversion a return to sleep mode afterwards.

This function will initialize the measurement, wait until the data is acquired and return the temperature.

Source§

type Error = TransportError<(), <I as RegisterInterfaceAsync>::BusError>

The error type which may occur on associated functions
Source§

type Measurement = Measurement

A type holding the measurements obtained by this sensor
Source§

impl<D: DelayNs, I: RegisterInterfaceAsync> TemperatureSensor for TMP102Async<D, I>

Auto Trait Implementations§

§

impl<D, I> Freeze for TMP102Async<D, I>
where D: Freeze, I: Freeze,

§

impl<D, I> RefUnwindSafe for TMP102Async<D, I>
where D: RefUnwindSafe, I: RefUnwindSafe,

§

impl<D, I> Send for TMP102Async<D, I>
where D: Send, I: Send,

§

impl<D, I> Sync for TMP102Async<D, I>
where D: Sync, I: Sync,

§

impl<D, I> Unpin for TMP102Async<D, I>
where D: Unpin, I: Unpin,

§

impl<D, I> UnwindSafe for TMP102Async<D, I>
where D: UnwindSafe, I: UnwindSafe,

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> Conv for T

Source§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
Source§

impl<T> FmtForward for T

Source§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
Source§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
Source§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
Source§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
Source§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
Source§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
Source§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
Source§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
Source§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> Pipe for T
where T: ?Sized,

Source§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
Source§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
Source§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
Source§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
Source§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
Source§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
Source§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
Source§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
Source§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> Tap for T

Source§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
Source§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
Source§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
Source§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
Source§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
Source§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
Source§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
Source§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
Source§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
Source§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
Source§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
Source§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
Source§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
Source§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
Source§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
Source§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> TryConv for T

Source§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.