DeviceStatusUnpacked

embedded_devices::devices::sensirion::sen68::commands

Struct DeviceStatusUnpacked

pub struct DeviceStatusUnpacked {
    pub fan_speed_warning: bool,
    pub pm_error: bool,
    pub hcho_error: bool,
    pub gas_error: bool,
    pub rh_t_error: bool,
    pub fan_error: bool,
}

Fields§

§fan_speed_warning: bool

Fan is switched on, but its speed is more than 10% off the target speed for multiple consecutive measurement intervals. During the first 10 seconds after starting the measurement, the fan speed is not checked (settling time). Very low or very high ambient temperature could trigger this warning during startup. If this flag is set constantly, it might indicate a problem with the power supply or with the fan, and the measured PM values might be wrong. This flag is automatically cleared as soon as the measured speed is within 10% of the target speed or when leaving the measure mode.

Can occur only in measurement mode.

Default: false

Bits: [10]

§pm_error: bool

Error related to the PM sensor. The particulate matter values might be unknown or wrong if this flag is set, relative humidity and temperature values might be out of specs due to compensation algorithms depending on PM sensor state.

Can occur only in measurement mode.

Default: false

Bits: [20]

§hcho_error: bool

Error related to the formaldehyde sensor. The formaldehyde values might be unknown or wrong if this flag is set, relative humidity and temperature values might be out of specs due to compensation algorithms depending on formaldehyde sensor state.

Can occur only in measurement mode.

Default: false

Bits: [21]

§gas_error: bool

Error related to the gas sensor. The VOC index and NOx index might be unknown or wrong if this flag is set, relative humidity and temperature values might be out of specs due to compensation algorithms depending on gas sensor state.

Can occur only in measurement mode.

Default: false

Bits: [24]

§rh_t_error: bool

Error related to the RH&T sensor. The temperature and humidity values might be unknown or wrong if this flag is set, and other measured values might be out of specs due compensation algorithms depending on RH&T sensor values.

Can occur only in measurement mode.

Default: false

Bits: [25]

§fan_error: bool

Fan is switched on, but 0 RPM is measured for multiple consecutive measurement intervals. This can occur if the fan is mechanically blocked or broken. Note that the measured values are most likely wrong if this error is reported.

Can occur only in measurement mode.

Default: false

Bits: [27]

Implementations§

impl DeviceStatusUnpacked

pub fn pack(&self) -> DeviceStatus

Pack all fields into a DeviceStatus.

pub fn bitdump_with_data(&self, data: Vec<u8>) -> BitdumpFormatter

Returns an object that implements Display for pretty-printing the contents and layout of this bit-packed struct

Trait Implementations§

impl AsRef<DeviceStatusUnpacked> for DeviceStatusUnpacked

fn as_ref(&self) -> &DeviceStatusUnpacked

Converts this type into a shared reference of the (usually inferred) input type.

impl BitdumpFormattable for DeviceStatusUnpacked

fn bitdump(&self) -> BitdumpFormatter

Returns an object that implements Display for pretty-printing the contents and layout of this bit-packed struct

impl Clone for DeviceStatusUnpacked

fn clone(&self) -> DeviceStatusUnpacked

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for DeviceStatusUnpacked

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for DeviceStatusUnpacked

fn default() -> Self

Returns the “default value” for a type. Read more

impl Format for DeviceStatusUnpacked

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl From<&DeviceStatus> for DeviceStatusUnpacked

fn from(value: &DeviceStatus) -> Self

Converts to this type from the input type.

impl From<&DeviceStatusUnpacked> for DeviceStatus

fn from(value: &DeviceStatusUnpacked) -> Self

Converts to this type from the input type.

impl From<DeviceStatus> for DeviceStatusUnpacked

fn from(value: DeviceStatus) -> Self

Converts to this type from the input type.

impl From<DeviceStatusUnpacked> for DeviceStatus

fn from(value: DeviceStatusUnpacked) -> Self

Converts to this type from the input type.

impl PartialEq for DeviceStatusUnpacked

fn eq(&self, other: &DeviceStatusUnpacked) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for DeviceStatusUnpacked

impl StructuralPartialEq for DeviceStatusUnpacked

Auto Trait Implementations§

impl Freeze for DeviceStatusUnpacked

impl RefUnwindSafe for DeviceStatusUnpacked

impl Send for DeviceStatusUnpacked

impl Sync for DeviceStatusUnpacked

impl Unpin for DeviceStatusUnpacked

impl UnwindSafe for DeviceStatusUnpacked

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Same for T

type Output = T

Should always be Self

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<T> MaybeBitdumpFormattable for T
where T: BitdumpFormattable,