Struct SplitSink

Source

pub struct SplitSink<S, Item> { /* private fields */ }

Expand description

A Sink part of the split pair

Implementations§

Source §

impl<S, Item> SplitSink<S, Item>
where S: Sink<Item> + Unpin,

Source

pub fn reunite(self, other: SplitStream<S>) -> Result<S, ReuniteError<S, Item>>

Attempts to put the two “halves” of a split Stream + Sink back together. Succeeds only if the SplitStream<S> and SplitSink<S> are a matching pair originating from the same call to StreamExt::split.

Source §

impl<S, Item> SplitSink<S, Item>

Source

pub fn is_pair_of(&self, other: &SplitStream<S>) -> bool

Returns true if the SplitStream<S> and SplitSink<S> originate from the same call to StreamExt::split.

Trait Implementations§

Source §

impl<S, Item> Debug for SplitSink<S, Item>
where S: Debug, Item: Debug,

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

Source §

impl<S, Item> Sink<Item> for SplitSink<S, Item>
where S: Sink<Item>,

Source §

type Error = <S as Sink<Item>>::Error

The type of value produced by the sink when an error occurs.

Source §

fn poll_ready( self: Pin<&mut SplitSink<S, Item>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <S as Sink<Item>>::Error>>

Attempts to prepare the Sink to receive a value. Read more

Source §

fn start_send( self: Pin<&mut SplitSink<S, Item>>, item: Item, ) -> Result<(), <S as Sink<Item>>::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more

Source §

fn poll_flush( self: Pin<&mut SplitSink<S, Item>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <S as Sink<Item>>::Error>>

Flush any remaining output from this sink. Read more

Source §

fn poll_close( self: Pin<&mut SplitSink<S, Item>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <S as Sink<Item>>::Error>>

Flush any remaining output and close this sink, if necessary. Read more

Source §

impl<S, Item> Unpin for SplitSink<S, Item>

Auto Trait Implementations§

§

impl<S, Item> !UnwindSafe for SplitSink<S, Item>

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<T> IntoRequest<T> for T

Source §

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request

Source §

impl<L> LayerExt<L> for L

Source §

fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>
where L: Layer<S>,

Applies the layer to a service and wraps it in Layered.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Blink].

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T, Item> SinkExt<Item> for T
where T: Sink<Item> + ?Sized,

Source §

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F>
where F: FnMut(U) -> Fut, Fut: Future<Output = Result<Item, E>>, E: From<Self::Error>, Self: Sized,

Composes a function in front of the sink. Read more

Source §

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F>
where F: FnMut(U) -> St, St: Stream<Item = Result<Item, Self::Error>>, Self: Sized,

Composes a function in front of the sink. Read more

Source §

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F>
where F: FnOnce(Self::Error) -> E, Self: Sized,

Transforms the error returned by the sink.

Source §

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E>
where Self: Sized, Self::Error: Into<E>,

Map this sink’s error to a different error type using the Into trait. Read more

Source §

fn buffer(self, capacity: usize) -> Buffer<Self, Item>
where Self: Sized,

Adds a fixed-size buffer to the current sink. Read more

Source §

fn close(&mut self) -> Close<'_, Self, Item>
where Self: Unpin,

Close the sink.

Source §

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si>
where Self: Sized, Item: Clone, Si: Sink<Item, Error = Self::Error>,

Fanout items to multiple sinks. Read more

Source §

fn flush(&mut self) -> Flush<'_, Self, Item>
where Self: Unpin,

Flush the sink, processing all pending items. Read more

Source §

fn send(&mut self, item: Item) -> Send<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been fully processed into the sink, including flushing. Read more

Source §

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been received by the sink. Read more

Source §

fn send_all<'a, St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St>
where St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized, Self: Unpin,

A future that completes after the given stream has been fully processed into the sink, including flushing. Read more

Source §

fn left_sink<Si2>(self) -> Either<Self, Si2>
where Si2: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more

Source §

fn right_sink<Si1>(self) -> Either<Si1, Self>
where Si1: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more

Source §

fn poll_ready_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_ready on Unpin sink types.

Source §

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error>
where Self: Unpin,

A convenience method for calling Sink::start_send on Unpin sink types.

Source §

fn poll_flush_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_flush on Unpin sink types.

Source §

fn poll_close_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_close on Unpin sink types.

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

Source §

fn vzip(self) -> V

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

impl<T> Data for T
where T: Send + Sync + 'static,

Source §

SplitSink

Struct SplitSink Copy item path

Implementations§

impl<S, Item> SplitSink<S, Item>where S: Sink<Item> + Unpin,

pub fn reunite(self, other: SplitStream<S>) -> Result<S, ReuniteError<S, Item>>

impl<S, Item> SplitSink<S, Item>

pub fn is_pair_of(&self, other: &SplitStream<S>) -> bool

Trait Implementations§

impl<S, Item> Debug for SplitSink<S, Item>where S: Debug, Item: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl<S, Item> Sink<Item> for SplitSink<S, Item>where S: Sink<Item>,

type Error = <S as Sink<Item>>::Error

fn poll_ready( self: Pin<&mut SplitSink<S, Item>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <S as Sink<Item>>::Error>>

fn start_send( self: Pin<&mut SplitSink<S, Item>>, item: Item, ) -> Result<(), <S as Sink<Item>>::Error>

fn poll_flush( self: Pin<&mut SplitSink<S, Item>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <S as Sink<Item>>::Error>>

fn poll_close( self: Pin<&mut SplitSink<S, Item>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <S as Sink<Item>>::Error>>

impl<S, Item> Unpin for SplitSink<S, Item>

Auto Trait Implementations§

impl<S, Item> Freeze for SplitSink<S, Item>where Item: Freeze,

impl<S, Item> !RefUnwindSafe for SplitSink<S, Item>

impl<S, Item> Send for SplitSink<S, Item>where Item: Send, S: Send,

impl<S, Item> Sync for SplitSink<S, Item>where Item: Sync, S: Send,

impl<S, Item> !UnwindSafe for SplitSink<S, Item>

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

impl<T> IntoRequest<T> for T

fn into_request(self) -> Request<T>

impl<L> LayerExt<L> for L

fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>where L: Layer<S>,

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

§Example

fn primary(&self) -> Painted<&T>

§Example

fn fixed(&self, color: u8) -> Painted<&T>

§Example

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

§Example

fn black(&self) -> Painted<&T>

§Example

fn red(&self) -> Painted<&T>

§Example

fn green(&self) -> Painted<&T>

§Example

fn yellow(&self) -> Painted<&T>

§Example

fn blue(&self) -> Painted<&T>

§Example

fn magenta(&self) -> Painted<&T>

§Example

fn cyan(&self) -> Painted<&T>

§Example

fn white(&self) -> Painted<&T>

§Example

fn bright_black(&self) -> Painted<&T>

§Example

fn bright_red(&self) -> Painted<&T>

§Example

fn bright_green(&self) -> Painted<&T>

§Example

fn bright_yellow(&self) -> Painted<&T>

§Example

fn bright_blue(&self) -> Painted<&T>

§Example

fn bright_magenta(&self) -> Painted<&T>

Struct SplitSink

impl<S, Item> SplitSink<S, Item>
where S: Sink<Item> + Unpin,

impl<S, Item> Debug for SplitSink<S, Item>
where S: Debug, Item: Debug,

impl<S, Item> Sink<Item> for SplitSink<S, Item>
where S: Sink<Item>,

impl<S, Item> Freeze for SplitSink<S, Item>
where Item: Freeze,

impl<S, Item> Send for SplitSink<S, Item>
where Item: Send, S: Send,

impl<S, Item> Sync for SplitSink<S, Item>
where Item: Sync, S: Send,

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>
where L: Layer<S>,

impl<T> Paint for T
where T: ?Sized,