Enum Indicator 

#[non_exhaustive]
pub enum Indicator {
    TsSyncLoss,
    SyncByteError,
    PatError2,
    ContinuityCountError,
    PmtError2,
    PidError,
    TransportError,
    CrcError,
    PcrRepetitionError,
    PcrDiscontinuityError,
    PtsError,
    CatError,
    NitError,
    SiRepetitionError,
    UnreferencedPid,
    SdtError,
    EitError,
    RstError,
    TdtError,
    EitPfError,
    NitOtherError,
    SdtOtherError,
    EitOtherError,
    SiMinGapError,
    PcrAccuracyError,
    BufferError,
    EmptyBufferError,
    DataDelayError,
}

A TR 101 290 measurement indicator.

#[non_exhaustive] — additional Priority-3 variants may be added later.

Variants (Non-exhaustive)

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

TsSyncLoss

TR 101 290 v1.4.1 Table 5.0a indicator 1.1 — loss of synchronisation with hysteresis.

SyncByteError

TR 101 290 v1.4.1 Table 5.0a indicator 1.2 — sync_byte not equal 0x47.

PatError2

TR 101 290 v1.4.1 Table 5.0a indicator 1.3.a — PAT_error_2.

ContinuityCountError

TR 101 290 v1.4.1 Table 5.0a indicator 1.4 — Continuity_count_error.

PmtError2

TR 101 290 v1.4.1 Table 5.0a indicator 1.5.a — PMT_error_2.

PidError

TR 101 290 v1.4.1 Table 5.0a indicator 1.6 — PID_error.

TransportError

TR 101 290 v1.4.1 Table 5.0b indicator 2.1 — Transport_error.

CrcError

TR 101 290 v1.4.1 Table 5.0b indicator 2.2 — CRC_error.

PcrRepetitionError

TR 101 290 v1.4.1 Table 5.0b indicator 2.3a — PCR_repetition_error.

PcrDiscontinuityError

TR 101 290 v1.4.1 Table 5.0b indicator 2.3b — PCR_discontinuity_indicator_error.

PtsError

TR 101 290 v1.4.1 Table 5.0b indicator 2.5 — PTS_error.

CatError

TR 101 290 v1.4.1 Table 5.0b indicator 2.6 — CAT_error.

NitError

TR 101 290 v1.4.1 Table 5.0c indicator 3.1 — NIT_error (bad table_id on PID 0x0010 + NIT_actual absence).

SiRepetitionError

TR 101 290 v1.4.1 Table 5.0c indicator 3.2 — SI_repetition_error (maximum interval dimension).

UnreferencedPid

TR 101 290 v1.4.1 Table 5.0c indicator 3.4 — Unreferenced_PID: a PID persists longer than the presence threshold without being referenced by the PAT/CAT/a PMT or one of the well-known SI PIDs.

SdtError

TR 101 290 v1.4.1 Table 5.0c indicator 3.5 — SDT_error (bad table_id on PID 0x0011 + SDT_actual absence).

EitError

TR 101 290 v1.4.1 Table 5.0c indicator 3.6 — EIT_error (bad table_id on PID 0x0012 + EIT P/F actual absence).

RstError

TR 101 290 v1.4.1 Table 5.0c indicator 3.7 — RST_error (bad table_id on PID 0x0013).

TdtError

TR 101 290 v1.4.1 Table 5.0c indicator 3.8 — TDT_error (bad table_id on PID 0x0014 + TDT absence).

EitPfError

TR 101 290 v1.4.1 Table 5.0c indicator 3.6.c — EIT_PF_error: if either section (‘0’ P or ‘1’ F) of an EIT P/F sub-table is present, both should exist.

NitOtherError

TR 101 290 v1.4.1 Table 5.0c — NIT_other_error (3.1.b): interval between sections with the same section_number and table_id = 0x41 on PID 0x0010 longer than 10 s.

SdtOtherError

TR 101 290 v1.4.1 Table 5.0c — SDT_other_error (3.5.b): interval between sections with the same section_number and table_id = 0x46 on PID 0x0011 longer than 10 s.

EitOtherError

TR 101 290 v1.4.1 Table 5.0c — EIT_other_error (3.6.b): interval between EIT P/F other sections with the same section_number and table_id = 0x4F on PID 0x0012 longer than 10 s.

SiMinGapError

TR 101 290 v1.4.1 Table 5.0c — min-gap violation: two sections of the same (table_id, section_number) occurred closer together than the specified minimum interval (25 ms per Table 5.0c rows 3.1.a, 3.2, 3.5.a, 3.6.a, 3.7, 3.8).

PcrAccuracyError

TR 101 290 v1.4.1 Table 5.0b indicator 2.4 — PCR_accuracy_error.

Not implemented: requires hardware arrival timing with ±500 ns resolution (ISO/IEC 13818-1 §2.4.2.2). A packet-index-derived arrival estimate cannot honestly resolve 500 ns, and a false positive is worse than a gap (c.f. the withdrawn PtsCheck). This variant exists for documentation completeness only and is never emitted by the monitor.

BufferError

TR 101 290 v1.4.1 Table 5.0c indicator 3.3 — Buffer_error.

Currently checks TB_buffering_error (overflow of transport buffer TBn, 512 bytes per ISO/IEC 13818-1 §2.4.2.3) and TBsys_buffering_error (overflow of TBsys, 512 bytes). The remaining sub-checks — MB_buffering_error, EB_buffering_error, B_buffering_error, Bsys_buffering_error — require codec-dependent buffer sizes from descriptors (multiplex_buffer_descriptor, smoothing_buffer_descriptor) and are deferred until the monitor parses those descriptors.

EmptyBufferError

TR 101 290 v1.4.1 Table 5.0c indicator 3.9 — Empty_buffer_error.

Checks that TBn (transport buffer for each elementary stream) and TBsys (system-information transport buffer) are empty at least once per second. The MBn check (multiplexing buffer, leak method) is deferred — it requires the full MBn buffer model with leak-rate parameters from descriptors.

DataDelayError

TR 101 290 v1.4.1 Table 5.0c indicator 3.10 — Data_delay_error.

Checks that data delay through the T-STD transport buffers (TBn, TBsys) does not exceed 1 second (60 s for still-picture video). The full end-to-end delay through MBn/EBn/Bn is not modelled (deferred — see Buffer_error doc).

Implementations

impl Indicator

pub fn priority(self) -> Priority

The priority tier this indicator belongs to.

pub fn name(self) -> &'static str

Verbatim indicator name from the TR 101 290 tables.

pub fn clause(self) -> &'static str

Clause citation from the spec.

Trait Implementations

impl Clone for Indicator

fn clone(&self) -> Indicator

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for Indicator

impl Debug for Indicator

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Indicator

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Eq for Indicator

impl Hash for Indicator

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl PartialEq for Indicator

fn eq(&self, other: &Indicator) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl Serialize for Indicator

Available on crate feature serde only.

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl StructuralPartialEq for Indicator