Struct Selectionless 

pub struct Selectionless(/* private fields */);

A Text that is guaranteed not to have Selections in it

Useful for sending across threads, especially when it comes to Logs.

Implementations

impl Selectionless

pub fn get(&self) -> Text

Gets the Text within, allowing for mutation again

Methods from Deref<Target = Text>

pub fn search_fwd<R: RegexPattern>( &self, pat: R, range: impl TextRange, ) -> Result<impl Iterator<Item = R::Match> + '_, Box<Error>>

Searches forward for a RegexPattern in a range

A RegexPattern can either be a single regex string, an array of strings, or a slice of strings. When there are more than one pattern, The return value will include which pattern matched.

The patterns will also automatically be cached, so you don’t need to do that.

pub fn search_rev<R: RegexPattern>( &self, pat: R, range: impl TextRange, ) -> Result<impl Iterator<Item = R::Match> + '_, Box<Error>>

Searches in reverse for a RegexPattern in a range

A RegexPattern can either be a single regex string, an array of strings, or a slice of strings. When there are more than one pattern, The return value will include which pattern matched.

The patterns will also automatically be cached, so you don’t need to do that.

pub fn matches( &self, pat: impl RegexPattern, range: impl TextRange, ) -> Result<bool, Box<Error>>

Returns true if the pattern is found in the given range

This is unanchored by default, if you want an anchored search, use the "^$" characters.

pub fn is_empty_empty(&self) -> bool

Whether the Bytes and InnerTags are empty

This ignores the last '\n' in the Text, since it is always there no matter what.

If you only want to check for the Bytes, ignoring possible Ghosts, see is_empty.

pub fn bytes(&self) -> &Bytes

The inner bytes of the Text

Note that, since Text has an implementation of std::ops::Deref<Target = Bytes>, you mostly don’t need to call this method.

pub fn indent(&self, p: Point, area: &impl Area, cfg: PrintCfg) -> usize

Gets the indentation level on the current line

pub fn ghost_max_points_at(&self, b: usize) -> (Point, Option<Point>)

The maximum points in the atth byte

This point is essentially the point at that byte, plus the last possible Point of any Ghosts in that position.

pub fn len_points(&self) -> (Point, Option<Point>)

The points at the end of the text

This will essentially return the last point of the text, alongside the last possible Point of any Ghost at the end of the text.

pub fn points_after(&self, tp: impl TwoPoints) -> Option<(Point, Option<Point>)>

Points visually after the TwoPoints

If the TwoPoints in question is concealed, treats the next visible character as the first character, and returns the points of the next visible character.

This method is useful if you want to iterator reversibly right after a certain point, thus including the character of said point.

pub fn visual_line_start(&self, p: impl TwoPoints) -> (Point, Option<Point>)

The visual start of the line

This point is defined not by where the line actually begins, but by where the last ‘\n’ was located. For example, if Tags create ghost text or omit text from multiple different lines, this point may differ from where in the Text the physical line actually begins.

pub fn get_ghost(&self, id: GhostId) -> Option<&Text>

Gets the Ghost of a given GhostId

pub fn unprocessed_moments(&self) -> Option<Vec<Moment>>

Returns a Moment containing all Changes since the last call to this function

This is useful if you want to figure out what has changed after a certain period of time has passed.

pub fn to_string(&self) -> String

Clones the inner Bytes as a String

This function will also cut out a final ‘\n’ from the string.

pub fn write_to(&self, writer: impl Write) -> Result<usize>

Writes the contents of this Text to a writer

pub fn has_unsaved_changes(&self) -> bool

Wether or not the content has changed since the last write

Returns true only if the actual bytes of the Text have been changed, ignoring Tags and all the other things, since those are not written to the filesystem.

pub fn iter_fwd(&self, at: impl TwoPoints) -> FwdIter<'_>

A forward iterator of the chars and tags of the Text

pub fn iter_rev(&self, at: impl TwoPoints) -> RevIter<'_>

A reverse iterator of the chars and tags of the Text

pub fn chars_fwd( &self, range: impl TextRange, ) -> Option<impl Iterator<Item = (Point, char)> + '_>

A forward iterator of the chars of the Text

Each char will be accompanied by a Point, which is the position where said character starts, e.g. Point::default() for the first character

pub fn chars_rev( &self, range: impl TextRange, ) -> Option<impl Iterator<Item = (Point, char)> + '_>

A reverse iterator of the chars of the Text

Each char will be accompanied by a Point, which is the position where said character starts, e.g. Point::default() for the first character

pub fn tags_fwd( &self, b: usize, ) -> Peekable<impl Iterator<Item = (usize, RawTag)> + Clone + 'a>

A forward iterator over the Tags of the Text

This iterator will consider some Tags before b, since their ranges may overlap with b

Note

Duat works fine with Tags in the middle of a codepoint, but external utilizers may not, so keep that in mind.

pub fn tags_rev( &self, b: usize, ) -> Peekable<impl Iterator<Item = (usize, RawTag)> + Clone + 'a>

An reverse iterator over the Tags of the Text

This iterator will consider some Tags ahead of b, since their ranges may overlap with b

Note

Duat works fine with Tags in the middle of a codepoint, but external utilizers may not, so keep that in mind.

pub fn raw_tags_fwd(&self, b: usize) -> impl Iterator<Item = (usize, RawTag)>

A forward Iterator over the RawTags

This Iterator does not take into account Tag ranges that intersect with the starting point, unlike Text::tags_fwd

pub fn raw_tags_rev(&self, b: usize) -> impl Iterator<Item = (usize, RawTag)>

A reverse Iterator over the RawTags

This Iterator does not take into account Tag ranges that intersect with the starting point, unlike Text::tags_rev

pub fn selections(&self) -> &Selections

The Selections printed to this Text, if they exist

pub fn history(&self) -> Option<&History>

The History of Moments in this Text

Methods from Deref<Target = Bytes>

pub fn len(&self) -> Point

The Point at the end of the text

pub fn is_empty(&self) -> bool

Whether or not there are any characters in Bytes, besides the final b'\n'

Note

This does not check for tags, so with a Tag::Ghost, there could actually be a “string” of characters on the Text, it just wouldn’t be considered real “text”. If you want to check for the InnerTags’s possible emptyness as well, see Text::is_empty_empty.

pub fn char_at(&self, p: Point) -> Option<char>

The char at the Point’s position

pub fn buffers(&self, range: impl RangeBounds<usize>) -> Buffers<'_>

An Iterator over the bytes in a given byte range

Unlike strs, this function works with byte ranges, not TextRanges. That’s because Strs is supposed to return valid UTF-8 strings, which need to have valid character terminations, so they should be indexed by a character range, not a byte range.

Since buffers is based on [u8]s, not strs, it doesn’t have the same restrictions, so a byte range can be used instead.

If the range is fully or partially out of bounds, one or both of the slices might be empty.

pub fn strs(&self, range: impl TextRange) -> Option<Strs<'_>>

An Iterator over the &strs of the Text

Note

The reason why this function returns two strings is that the contents of the text are stored in a GapBuffer, which works with two strings.

If you want to iterate over them, you can do the following:

let bytes = text.bytes();
let chars = bytes.strs(p0..p1).unwrap().chars();

for char in chars {
    todo!();
}

Do note that you should avoid iterators like str::lines, as they will separate the line that is partially owned by each &str:

let broken_up_line = [
    "This is line 1, business as usual.\nThis is line 2, but it",
    "is broken into two separate strings.\nSo 4 lines would be counted, instead of 3",
];

This is one way that the inner GapBuffer could be set up, where one of the lines is split among the two slices.

If you wish to iterate over the lines, see Bytes::lines.

pub fn lines(&self, range: impl TextRange) -> Lines<'_>

Returns an iterator over the lines in a given range

The lines are inclusive, that is, it will iterate over the whole line, not just the parts within the range.

pub fn point_at_byte(&self, b: usize) -> Point

The Point corresponding to the byte position, 0 indexed

If the byte position would fall in between two characters (because the first one comprises more than one byte), the first character is chosen as the Point where the byte is located.

Panics

Will panic if b is greater than the length of the text

pub fn point_at_char(&self, c: usize) -> Point

The Point associated with the cth char

Panics

Will panic if c is greater than the number of chars in the text.

pub fn point_at_line(&self, l: usize) -> Point

The Point where the lth line starts, 0 indexed

If l == number_of_lines, returns the last point of the text.

Panics

Will panic if the number l is greater than the number of lines on the text

pub fn points_of_line(&self, l: usize) -> [Point; 2]

The start and end Points for the lth line

If l == number_of_lines, these points will be the same.

The second number includes the \n at the end of the line.

Panics

Will panic if the number l is greater than the number of lines on the text

pub fn last_point(&self) -> Point

The last Point associated with a char

This will give the Point of the last char of the text. The difference between this method and len is that it will return a Point one position earlier than it. If the text is completely empty, it will return None.

pub fn chars_fwd( &self, range: impl TextRange, ) -> Option<impl Iterator<Item = (Point, char)> + '_>

A forward iterator of the chars of Bytes

Each char will be accompanied by a Point, which is the position where said character starts, e.g. Point::default() for the first character

pub fn chars_rev( &self, range: impl TextRange, ) -> Option<impl Iterator<Item = (Point, char)> + '_>

A reverse iterator of the chars in Bytes

Each char will be accompanied by a Point, which is the position where said character starts, e.g. Point::default() for the first character

pub fn indent(&self, p: Point, cfg: PrintCfg) -> usize

Gets the indentation level on the current line

pub fn get_contiguous(&self, range: impl TextRange) -> Option<&str>

Tries to get a contiguous &str from the Bytes

Returns None if the gap of the inner buffer was within the given range OR.

pub fn search_fwd<R: RegexPattern>( &self, pat: R, range: impl TextRange, ) -> Result<impl Iterator<Item = R::Match> + '_, Box<Error>>

Searches forward for a RegexPattern in a range

A RegexPattern can either be a single regex string, an array of strings, or a slice of strings. When there are more than one pattern, The return value will include which pattern matched.

The patterns will also automatically be cached, so you don’t need to do that.

pub fn search_rev<R: RegexPattern>( &self, pat: R, range: impl TextRange, ) -> Result<impl Iterator<Item = R::Match> + '_, Box<Error>>

Searches in reverse for a RegexPattern in a range

A RegexPattern can either be a single regex string, an array of strings, or a slice of strings. When there are more than one pattern, The return value will include which pattern matched.

The patterns will also automatically be cached, so you don’t need to do that.

pub fn matches( &self, pat: impl RegexPattern, range: impl TextRange, ) -> Result<bool, Box<Error>>

Returns true if the pattern is found in the given range

This is unanchored by default, if you want an anchored search, use the "^$" characters.

Trait Implementations

impl Clone for Selectionless

fn clone(&self) -> Selectionless

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Selectionless

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Deref for Selectionless

type Target = Text

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<Selectionless> for Text

fn from(value: Selectionless) -> Self

Converts to this type from the input type.

impl Send for Selectionless

impl Sync for Selectionless