Struct dharitri_wasm_node::ArwenApiImpl

pub struct ArwenApiImpl {}

The reference to the API implementation based on Arwen hooks. It continas no data, can be embedded at no cost. Cloning it is a no-op.

Trait Implementations

impl CallValueApi<ArwenBigUint> for ArwenApiImpl

fn check_not_payable(&self)

fn moax_value(&self) -> ArwenBigUint

Retrieves the MOAX call value from the VM. Will return 0 in case of an DCT transfer (cannot have both MOAX and DCT transfer simultaneously).

fn dct_value(&self) -> ArwenBigUint

Retrieves the DCT call value from the VM. Will return 0 in case of an MOAX transfer (cannot have both MOAX and DCT transfer simultaneously).

fn token(&self) -> TokenIdentifier

Returns the call value token identifier of the current call. The identifier is wrapped in a TokenIdentifier object, to hide underlying logic.

fn dct_token_nonce(&self) -> u64

Returns the nonce of the received DCT token. Will return 0 in case of MOAX or fungible DCT transfer.

fn dct_token_type(&self) -> DctTokenType

Returns the DCT token type. Will return “Fungible” for MOAX.

fn require_moax(&self) -> BigUint

Will return the MOAX call value, but also fail with an error if DCT is sent. Especially used in the auto-generated call value processing.

fn require_dct(&self, token: &[u8]) -> BigUint

Will return the DCT call value, but also fail with an error if MOAX or the wrong DCT token is sent. Especially used in the auto-generated call value processing.

fn payment_token_pair(&self) -> (BigUint, TokenIdentifier)

Returns both the call value (either MOAX or DCT) and the token identifier. Especially used in the `#[payable(“*”)] auto-generated snippets. The method might seem redundant, but there is such a hook in Arwen that might be used in this scenario in the future.

impl Clone for ArwenApiImpl

Should be no-op. The API implementation is zero-sized.

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl ContractHookApi<ArwenBigInt, ArwenBigUint> for ArwenApiImpl

type Storage = ArwenApiImpl

Abstracts the lower-level storage functionality.

type CallValue = ArwenApiImpl

Abstracts the call value handling at the beginning of a function call.

type SendApi = ArwenApiImpl

Abstracts the sending of MOAX & DCT transactions, as well as async calls.

fn get_storage_raw(&self) -> Self::Storage

Gateway into the lower-level storage functionality. Storage related annotations make use of this. Using it directly is not recommended.

fn call_value(&self) -> Self::CallValue

Gateway into the call value retrieval functionality. The payment annotations should normally be the ones to handle this, but the developer is also given direct access to the API.

fn send(&self) -> Self::SendApi

Gateway to the functionality related to sending transactions from the current contract.

fn get_sc_address(&self) -> Address

fn get_owner_address(&self) -> Address

fn get_shard_of_address(&self, address: &Address) -> u32

fn is_smart_contract(&self, address: &Address) -> bool

fn get_caller(&self) -> Address

fn get_balance(&self, address: &Address) -> ArwenBigUint

fn get_tx_hash(&self) -> H256

fn get_gas_left(&self) -> u64

fn get_block_timestamp(&self) -> u64

fn get_block_nonce(&self) -> u64

fn get_block_round(&self) -> u64

fn get_block_epoch(&self) -> u64

fn get_block_random_seed(&self) -> Box<[u8; 48]>

fn get_prev_block_timestamp(&self) -> u64

fn get_prev_block_nonce(&self) -> u64

fn get_prev_block_round(&self) -> u64

fn get_prev_block_epoch(&self) -> u64

fn get_prev_block_random_seed(&self) -> Box<[u8; 48]>

fn get_current_dct_nft_nonce(&self, address: &Address, token: &[u8]) -> u64

fn get_dct_balance( &self, address: &Address, token: &[u8], nonce: u64 ) -> ArwenBigUint

fn get_dct_token_data( &self, address: &Address, token: &[u8], nonce: u64 ) -> DctTokenData<ArwenBigUint>

fn get_sc_balance(&self) -> BigUint

fn storage_load_cumulated_validator_reward(&self) -> BigUint

impl CryptoApi for ArwenApiImpl

fn sha256(&self, data: &[u8]) -> H256

fn keccak256(&self, data: &[u8]) -> H256

fn verify_bls(&self, key: &[u8], message: &[u8], signature: &[u8]) -> bool

fn verify_ed25519(&self, key: &[u8], message: &[u8], signature: &[u8]) -> bool

fn verify_secp256k1(&self, key: &[u8], message: &[u8], signature: &[u8]) -> bool

Note: the signature is minimum 2 bytes in length, the second byte encodes the length of the remaining signature bytes.

impl EndpointArgumentApi for ArwenApiImpl

Interface to only be used by code generated by the macros. The smart contract code doesn’t have access to these methods directly.

fn get_num_arguments(&self) -> i32

fn get_argument_len(&self, arg_index: i32) -> usize

fn copy_argument_to_slice(&self, arg_index: i32, slice: &mut [u8])

fn get_argument_vec_u8(&self, arg_index: i32) -> Vec<u8>

fn get_argument_boxed_bytes(&self, arg_index: i32) -> BoxedBytes

fn get_argument_big_uint_raw(&self, arg_id: i32) -> i32

fn get_argument_big_int_raw(&self, arg_id: i32) -> i32

fn get_argument_u64(&self, arg_id: i32) -> u64

fn get_argument_i64(&self, arg_id: i32) -> i64

fn check_num_arguments(&self, expected: i32)

impl EndpointFinishApi for ArwenApiImpl

Interface to only be used by code generated by the macros. The smart contract code doesn’t have access to these methods directly.

fn finish_slice_u8(&self, slice: &[u8])

fn finish_big_int_raw(&self, handle: i32)

fn finish_big_uint_raw(&self, handle: i32)

fn finish_u64(&self, value: u64)

fn finish_i64(&self, value: i64)

impl ErrorApi for ArwenApiImpl

fn signal_error(&self, message: &[u8]) -> !

impl LogApi for ArwenApiImpl

Interface to only be used by code generated by the macros. The smart contract code doesn’t have access to these methods directly.

fn write_event_log(&self, topics_buffer: &ArgBuffer, data: &[u8])

Saves an event log.

fn write_legacy_log(&self, topics: &[[u8; 32]], data: &[u8])

The legacy Arwen hook for saving event logs. It does the same, but only accepts 32-byte topics. Only kept for backwards compatibility.

impl SendApi<ArwenBigUint> for ArwenApiImpl

fn direct_moax(&self, to: &Address, amount: &ArwenBigUint, data: &[u8])

Sends MOAX to a given address, directly. Used especially for sending MOAX to regular accounts.

fn direct_moax_execute( &self, to: &Address, amount: &ArwenBigUint, gas_limit: u64, function: &[u8], arg_buffer: &ArgBuffer )

Sends MOAX to an address (optionally) and executes like an async call, but without callback.

fn direct_dct_execute( &self, to: &Address, token: &[u8], amount: &ArwenBigUint, gas_limit: u64, function: &[u8], arg_buffer: &ArgBuffer )

Sends DCT to an address and executes like an async call, but without callback.

fn direct_dct_nft_execute( &self, to: &Address, token: &[u8], nonce: u64, amount: &ArwenBigUint, gas_limit: u64, function: &[u8], arg_buffer: &ArgBuffer )

Sends DCT NFT to an address and executes like an async call, but without callback.

fn async_call_raw(&self, to: &Address, amount: &ArwenBigUint, data: &[u8]) -> !

Sends an asynchronous call to another contract. Calling this method immediately terminates tx execution. Using it directly is generally discouraged.

fn deploy_contract( &self, gas: u64, amount: &ArwenBigUint, code: &BoxedBytes, code_metadata: CodeMetadata, arg_buffer: &ArgBuffer ) -> Address

Deploys a new contract in the same shard. Unlike async_call_raw, the deployment is synchronous and tx execution continues afterwards. Also unlike async_call_raw, it uses an argument buffer to pass arguments

fn execute_on_dest_context_raw( &self, gas: u64, address: &Address, amount: &ArwenBigUint, function: &[u8], arg_buffer: &ArgBuffer ) -> Vec<BoxedBytes>

fn execute_on_dest_context_by_caller_raw( &self, gas: u64, address: &Address, amount: &ArwenBigUint, function: &[u8], arg_buffer: &ArgBuffer ) -> Vec<BoxedBytes>

fn execute_on_same_context_raw( &self, gas: u64, address: &Address, amount: &ArwenBigUint, function: &[u8], arg_buffer: &ArgBuffer )

fn storage_store_tx_hash_key(&self, data: &[u8])

Used to store data between async call and callback.

fn storage_load_tx_hash_key(&self) -> BoxedBytes

Used to store data between async call and callback.

fn call_local_dct_built_in_function( &self, gas: u64, function: &[u8], arg_buffer: &ArgBuffer )

Allows synchronously calling a local function by name. Execution is resumed afterwards. You should never have to call this function directly. Use the other specific methods instead.

fn direct_dct_via_transf_exec( &self, to: &Address, token: &[u8], amount: &BigUint, data: &[u8] )

Sends an DCT token to a given address, directly. Used especially for sending DCT to regular accounts.

fn direct( &self, to: &Address, token: &TokenIdentifier, amount: &BigUint, data: &[u8] )

Sends either MOAX or an DCT token to the target address, depending on what token identifier was specified.

fn direct_dct_via_async_call( &self, to: &Address, dct_token_name: &[u8], amount: &BigUint, data: &[u8] ) -> !

Performs a simple DCT transfer, but via async call. This is the preferred way to send DCT.

fn direct_via_async_call( &self, to: &Address, token: &TokenIdentifier, amount: &BigUint, data: &[u8] )

Sends either MOAX or an DCT token to the target address, depending on what token identifier was specified. In case of DCT it performs an async call.

fn async_call(&self, async_call: AsyncCall<BigUint>) -> !

Sends an asynchronous call to another contract, with either MOAX or DCT value. The token argument decides which one it will be. Calling this method immediately terminates tx execution.

fn dct_local_mint(&self, gas: u64, token: &[u8], amount: &BigUint)

Allows synchronous minting of DCT tokens. Execution is resumed afterwards.

fn dct_local_burn(&self, gas: u64, token: &[u8], amount: &BigUint)

Allows synchronous burning of DCT tokens. Execution is resumed afterwards.

fn dct_nft_create<T>( &self, gas: u64, token: &[u8], amount: &BigUint, name: &BoxedBytes, royalties: &BigUint, hash: &H256, attributes: &T, uris: &[BoxedBytes] )

where T: TopEncode,

Creates a new NFT token of a certain type (determined by token_identifier).
attributes can be any serializable custom struct.
This is a built-in function, so the smart contract execution is resumed after.

fn dct_nft_add_quantity( &self, gas: u64, token: &[u8], nonce: u64, amount: &BigUint )

Adds quantity for an Non-Fungible Token. (which makes it a Semi-Fungible Token by definition)
This is a built-in function, so the smart contract execution is resumed after.

fn dct_nft_burn(&self, gas: u64, token: &[u8], nonce: u64, amount: &BigUint)

The reverse operation of dct_nft_add_quantity, this locally decreases This is a built-in function, so the smart contract execution is resumed after.

fn direct_dct_nft_via_async_call( &self, from: &Address, to: &Address, token: &[u8], nonce: u64, amount: &BigUint, data: &[u8] )

Performs a simple DCT NFT transfer, but via async call. This is the preferred way to send DCT. Note: call is done to the SC itself, so from should be the SCs own address

fn direct_dct_nft_via_transfer_exec( &self, to: &Address, token: &[u8], nonce: u64, amount: &BigUint, data: &[u8] )

Sends an DCT NFT to a given address, directly. Used especially for sending DCT to regular accounts.

impl StorageReadApi for ArwenApiImpl

fn storage_load_len(&self, key: &[u8]) -> usize

fn storage_load_vec_u8(&self, key: &[u8]) -> Vec<u8>

fn storage_load_boxed_bytes(&self, key: &[u8]) -> BoxedBytes

fn storage_load_big_uint_raw(&self, key: &[u8]) -> i32

fn storage_load_u64(&self, key: &[u8]) -> u64

fn storage_load_i64(&self, key: &[u8]) -> i64

impl StorageWriteApi for ArwenApiImpl

fn storage_store_slice_u8(&self, key: &[u8], value: &[u8])

fn storage_store_big_uint_raw(&self, key: &[u8], handle: i32)

fn storage_store_u64(&self, key: &[u8], value: u64)

fn storage_store_i64(&self, key: &[u8], value: i64)