Struct dharitri_wasm_node::ArwenApiImpl

pub struct ArwenApiImpl {}

The reference to the API implementation based on Arwen hooks. It continas no data, can be embedded at no cost. Cloning it is a no-op.

Trait Implementations

impl BigIntApi for ArwenApiImpl

fn bi_new(&self, value: i64) -> Handle

fn bi_unsigned_byte_length(&self, x: Handle) -> usize

fn bi_get_unsigned_bytes(&self, handle: Handle) -> BoxedBytes

fn bi_set_unsigned_bytes(&self, destination: Handle, bytes: &[u8])

fn bi_signed_byte_length(&self, x: Handle) -> usize

fn bi_get_signed_bytes(&self, handle: Handle) -> BoxedBytes

fn bi_set_signed_bytes(&self, destination: Handle, bytes: &[u8])

fn bi_to_i64(&self, reference: Handle) -> Option<i64>

fn bi_add(&self, dest: Handle, x: Handle, y: Handle)

fn bi_sub(&self, dest: Handle, x: Handle, y: Handle)

fn bi_sub_unsigned(&self, dest: Handle, x: Handle, y: Handle)

fn bi_mul(&self, dest: Handle, x: Handle, y: Handle)

fn bi_t_div(&self, dest: Handle, x: Handle, y: Handle)

fn bi_t_mod(&self, dest: Handle, x: Handle, y: Handle)

fn bi_abs(&self, dest: Handle, x: Handle)

fn bi_neg(&self, dest: Handle, x: Handle)

fn bi_sign(&self, x: Handle) -> Sign

fn bi_cmp(&self, x: Handle, y: Handle) -> Ordering

fn bi_sqrt(&self, dest: Handle, x: Handle)

fn bi_pow(&self, dest: Handle, x: Handle, y: Handle)

fn bi_log2(&self, x: Handle) -> u32

fn bi_and(&self, dest: Handle, x: Handle, y: Handle)

fn bi_or(&self, dest: Handle, x: Handle, y: Handle)

fn bi_xor(&self, dest: Handle, x: Handle, y: Handle)

fn bi_shr(&self, dest: Handle, x: Handle, bits: usize)

fn bi_shl(&self, dest: Handle, x: Handle, bits: usize)

fn bi_new_zero(&self) -> i32

impl BlockchainApi for ArwenApiImpl

fn get_sc_address_legacy(&self) -> Address

fn get_sc_address(&self) -> ManagedAddress<Self>

fn get_owner_address_legacy(&self) -> Address

fn get_owner_address(&self) -> ManagedAddress<Self>

fn get_shard_of_address(&self, address: &Address) -> u32

fn is_smart_contract(&self, address: &Address) -> bool

fn get_caller_legacy(&self) -> Address

fn get_caller(&self) -> ManagedAddress<Self>

fn get_balance(&self, address: &Address) -> BigUint<Self>

fn get_state_root_hash(&self) -> H256

fn get_state_root_hash_managed(&self) -> ManagedByteArray<Self, 32>

fn get_tx_hash(&self) -> H256

fn get_tx_hash_managed(&self) -> ManagedByteArray<Self, 32>

fn get_gas_left(&self) -> u64

fn get_block_timestamp(&self) -> u64

fn get_block_nonce(&self) -> u64

fn get_block_round(&self) -> u64

fn get_block_epoch(&self) -> u64

fn get_block_random_seed(&self) -> Box<[u8; 48]>

fn get_block_random_seed_managed(&self) -> ManagedByteArray<Self, 48>

fn get_prev_block_timestamp(&self) -> u64

fn get_prev_block_nonce(&self) -> u64

fn get_prev_block_round(&self) -> u64

fn get_prev_block_epoch(&self) -> u64

fn get_prev_block_random_seed(&self) -> Box<[u8; 48]>

fn get_prev_block_random_seed_managed(&self) -> ManagedByteArray<Self, 48>

fn get_current_dct_nft_nonce( &self, address: &Address, token: &TokenIdentifier<Self> ) -> u64

fn get_dct_balance( &self, m_address: &ManagedAddress<Self>, token: &TokenIdentifier<Self>, nonce: u64 ) -> BigUint<Self>

fn get_dct_token_data( &self, address: &ManagedAddress<Self>, token: &TokenIdentifier<Self>, nonce: u64 ) -> DctTokenData<Self>

impl CallValueApi for ArwenApiImpl

fn check_not_payable(&self)

fn moax_value(&self) -> BigUint<Self>

Retrieves the MOAX call value from the VM. Will return 0 in case of an DCT transfer (cannot have both MOAX and DCT transfer simultaneously).

fn dct_value(&self) -> BigUint<Self>

Retrieves the DCT call value from the VM. Will return 0 in case of an MOAX transfer (cannot have both MOAX and DCT transfer simultaneously).

fn token(&self) -> TokenIdentifier<Self>

Returns the call value token identifier of the current call. The identifier is wrapped in a TokenIdentifier object, to hide underlying logic.

fn dct_token_nonce(&self) -> u64

Returns the nonce of the received DCT token. Will return 0 in case of MOAX or fungible DCT transfer.

fn dct_token_type(&self) -> DctTokenType

Returns the DCT token type. Will return “Fungible” for MOAX.

fn dct_num_transfers(&self) -> usize

fn dct_value_by_index(&self, index: usize) -> BigUint<Self>

fn token_by_index(&self, index: usize) -> TokenIdentifier<Self>

fn dct_token_nonce_by_index(&self, index: usize) -> u64

fn dct_token_type_by_index(&self, index: usize) -> DctTokenType

fn get_all_dct_transfers(&self) -> ManagedVec<Self, DctTokenPayment<Self>>

fn require_moax(&self) -> BigUint<Self>

Will return the MOAX call value, but also fail with an error if DCT is sent. Especially used in the auto-generated call value processing.

fn require_dct(&self, token: &[u8]) -> BigUint<Self>

Will return the DCT call value, but also fail with an error if MOAX or the wrong DCT token is sent. Especially used in the auto-generated call value processing.

fn payment_token_pair(&self) -> (BigUint<Self>, TokenIdentifier<Self>)

Returns both the call value (either MOAX or DCT) and the token identifier. Especially used in the `#[payable(“*”)] auto-generated snippets. The method might seem redundant, but there is such a hook in Arwen that might be used in this scenario in the future.

impl Clone for ArwenApiImpl

Should be no-op. The API implementation is zero-sized.

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl CryptoApi for ArwenApiImpl

fn sha256(&self, data: &[u8]) -> H256

fn keccak256(&self, data: &[u8]) -> H256

fn ripemd160(&self, data: &[u8]) -> Box<[u8; 20]>

fn verify_bls(&self, key: &[u8], message: &[u8], signature: &[u8]) -> bool

fn verify_ed25519(&self, key: &[u8], message: &[u8], signature: &[u8]) -> bool

fn verify_secp256k1(&self, key: &[u8], message: &[u8], signature: &[u8]) -> bool

Note: the signature is minimum 2 bytes in length, the second byte encodes the length of the remaining signature bytes.

fn verify_custom_secp256k1( &self, key: &[u8], message: &[u8], signature: &[u8], hash_type: MessageHashType ) -> bool

fn encode_secp256k1_der_signature(&self, r: &[u8], s: &[u8]) -> BoxedBytes

impl EllipticCurveApi for ArwenApiImpl

fn ec_create(&self, name: &[u8]) -> Handle

fn ec_get_values( &self, ec_handle: Handle, field_order_handle: Handle, base_point_order_handle: Handle, eq_constant_handle: Handle, x_base_point_handle: Handle, y_base_point_handle: Handle )

fn ec_curve_length(&self, ec_handle: Handle) -> u32

fn ec_private_key_byte_length(&self, ec_handle: Handle) -> u32

fn ec_add( &self, x_result_handle: Handle, y_result_handle: Handle, ec_handle: Handle, x_first_point: Handle, y_first_point: Handle, x_second_point: Handle, y_second_point: Handle )

fn ec_double( &self, x_result_handle: Handle, y_result_handle: Handle, ec_handle: Handle, x_point_handle: Handle, y_point_handle: Handle )

fn ec_is_on_curve( &self, ec_handle: Handle, x_point_handle: Handle, y_point_handle: Handle ) -> bool

fn ec_scalar_mult( &self, x_result_handle: Handle, y_result_handle: Handle, ec_handle: Handle, x_point_handle: Handle, y_point_handle: Handle, data: &[u8] )

fn ec_scalar_base_mult( &self, x_result_handle: Handle, y_result_handle: Handle, ec_handle: Handle, data: &[u8] )

fn ec_marshal( &self, ec_handle: Handle, x_pair_handle: Handle, y_pair_handle: Handle ) -> BoxedBytes

fn ec_marshal_compressed( &self, ec_handle: Handle, x_pair_handle: Handle, y_pair_handle: Handle ) -> BoxedBytes

fn ec_unmarshal( &self, x_result_handle: Handle, y_result_handle: Handle, ec_handle: Handle, data: &[u8] )

fn ec_unmarshal_compressed( &self, x_result_handle: Handle, y_result_handle: Handle, ec_handle: Handle, data: &[u8] )

fn ec_generate_key( &self, x_pub_key_handle: Handle, y_pub_key_handle: Handle, ec_handle: Handle ) -> BoxedBytes

impl EndpointArgumentApi for ArwenApiImpl

Interface to only be used by code generated by the macros. The smart contract code doesn’t have access to these methods directly.

fn get_num_arguments(&self) -> i32

fn get_argument_len(&self, arg_index: i32) -> usize

fn copy_argument_to_slice(&self, arg_index: i32, slice: &mut [u8])

fn get_argument_vec_u8(&self, arg_index: i32) -> Vec<u8>

fn get_argument_boxed_bytes(&self, arg_index: i32) -> BoxedBytes

fn get_argument_big_uint_raw(&self, arg_id: i32) -> i32

fn get_argument_big_int_raw(&self, arg_id: i32) -> i32

fn get_argument_managed_buffer_raw(&self, arg_id: i32) -> Handle

fn get_argument_u64(&self, arg_id: i32) -> u64

fn get_argument_i64(&self, arg_id: i32) -> i64

fn check_num_arguments(&self, expected: i32)

impl EndpointFinishApi for ArwenApiImpl

Interface to only be used by code generated by the macros. The smart contract code doesn’t have access to these methods directly.

fn finish_slice_u8(&self, slice: &[u8])

fn finish_big_int_raw(&self, handle: i32)

fn finish_big_uint_raw(&self, handle: i32)

fn finish_managed_buffer_raw(&self, handle: Handle)

fn finish_u64(&self, value: u64)

fn finish_i64(&self, value: i64)

impl ErrorApi for ArwenApiImpl

fn signal_error(&self, message: &[u8]) -> !

fn signal_error_from_buffer(&self, message_handle: Handle) -> !

impl LogApi for ArwenApiImpl

Interface to only be used by code generated by the macros. The smart contract code doesn’t have access to these methods directly.

fn write_event_log(&self, topics_buffer: &ArgBuffer, data: &[u8])

Saves an event log.

fn write_legacy_log(&self, topics: &[[u8; 32]], data: &[u8])

The legacy Arwen hook for saving event logs. It does the same, but only accepts 32-byte topics. Only kept for backwards compatibility.

fn managed_write_log(&self, topics_handle: Handle, data_handle: Handle)

impl ManagedBufferApi for ArwenApiImpl

fn mb_new_empty(&self) -> Handle

fn mb_new_from_bytes(&self, bytes: &[u8]) -> Handle

fn mb_len(&self, handle: Handle) -> usize

fn mb_to_boxed_bytes(&self, handle: Handle) -> BoxedBytes

fn mb_load_slice( &self, source_handle: Handle, starting_position: usize, dest_slice: &mut [u8] ) -> Result<(), InvalidSliceError>

TODO: investigate the impact of using Result<(), ()> on the wasm output.

fn mb_copy_slice( &self, source_handle: Handle, starting_pos: usize, slice_len: usize, dest_handle: Handle ) -> Result<(), InvalidSliceError>

TODO: investigate the impact of using Result<(), ()> on the wasm output.

fn mb_copy_to_slice_pad_right(&self, handle: Handle, destination: &mut [u8])

fn mb_overwrite(&self, handle: Handle, bytes: &[u8])

fn mb_append(&self, accumulator_handle: Handle, data_handle: Handle)

fn mb_append_bytes(&self, accumulator_handle: Handle, bytes: &[u8])

fn mb_eq(&self, handle1: Handle, handle2: Handle) -> bool

impl ManagedTypeApi for ArwenApiImpl

fn mb_to_big_int_unsigned(&self, buffer_handle: Handle) -> Handle

fn mb_to_big_int_signed(&self, buffer_handle: Handle) -> Handle

fn mb_from_big_int_unsigned(&self, big_int_handle: Handle) -> Handle

fn mb_from_big_int_signed(&self, big_int_handle: Handle) -> Handle

impl SendApi for ArwenApiImpl

fn direct_moax<D>( &self, to: &ManagedAddress<Self>, amount: &BigUint<Self>, data: D )

where D: ManagedInto<Self, ManagedBuffer<Self>>,

Sends MOAX to a given address, directly. Used especially for sending MOAX to regular accounts.

fn direct_moax_execute( &self, to: &ManagedAddress<Self>, amount: &BigUint<Self>, gas_limit: u64, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> Result<(), &'static [u8]>

Sends MOAX to an address (optionally) and executes like an async call, but without callback.

fn direct_dct_execute( &self, to: &ManagedAddress<Self>, token: &TokenIdentifier<Self>, amount: &BigUint<Self>, gas_limit: u64, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> Result<(), &'static [u8]>

Sends DCT to an address and executes like an async call, but without callback.

fn direct_dct_nft_execute( &self, to: &ManagedAddress<Self>, token: &TokenIdentifier<Self>, nonce: u64, amount: &BigUint<Self>, gas_limit: u64, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> Result<(), &'static [u8]>

Sends DCT NFT to an address and executes like an async call, but without callback.

fn direct_multi_dct_transfer_execute( &self, to: &ManagedAddress<Self>, payments: &ManagedVec<Self, DctTokenPayment<Self>>, gas_limit: u64, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> Result<(), &'static [u8]>

fn async_call_raw( &self, to: &ManagedAddress<Self>, amount: &BigUint<Self>, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> !

Sends an asynchronous call to another contract. Calling this method immediately terminates tx execution. Using it directly is generally discouraged.

fn deploy_contract( &self, gas: u64, amount: &BigUint<Self>, code: &ManagedBuffer<Self>, code_metadata: CodeMetadata, arg_buffer: &ManagedArgBuffer<Self> ) -> (ManagedAddress<Self>, ManagedVec<Self, ManagedBuffer<Self>>)

Deploys a new contract in the same shard. Unlike async_call_raw, the deployment is synchronous and tx execution continues afterwards. Also unlike async_call_raw, it uses an argument buffer to pass arguments If the deployment fails, Option::None is returned

fn deploy_from_source_contract( &self, gas: u64, amount: &BigUint<Self>, source_contract_address: &ManagedAddress<Self>, code_metadata: CodeMetadata, arg_buffer: &ManagedArgBuffer<Self> ) -> (ManagedAddress<Self>, ManagedVec<Self, ManagedBuffer<Self>>)

Deploys a new contract in the same shard by re-using the code of an already deployed source contract. The deployment is done synchronously and the new contract’s address is returned. If the deployment fails, Option::None is returned

fn upgrade_contract( &self, sc_address: &ManagedAddress<Self>, gas: u64, amount: &BigUint<Self>, code: &ManagedBuffer<Self>, code_metadata: CodeMetadata, arg_buffer: &ManagedArgBuffer<Self> )

Upgrades a child contract of the currently executing contract. The upgrade is synchronous, and the current transaction will fail if the upgrade fails. The child contract’s new init function will be called with the provided arguments

fn execute_on_dest_context_raw( &self, gas: u64, to: &ManagedAddress<Self>, amount: &BigUint<Self>, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> ManagedVec<Self, ManagedBuffer<Self>>

Same shard, in-line execution of another contract.

fn execute_on_dest_context_raw_custom_result_range<F>( &self, gas: u64, to: &ManagedAddress<Self>, amount: &BigUint<Self>, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self>, range_closure: F ) -> ManagedVec<Self, ManagedBuffer<Self>>

where F: FnOnce(usize, usize) -> (usize, usize),

Same shard, in-line execution of another contract. Allows the contract to specify which result range to extract as sync call result. This is a workaround to handle nested sync calls. Please do not use this method unless there is absolutely no other option. Will be eliminated after some future Arwen hook redesign. range_closure takes the number of results before, the number of results after, and is expected to return the start index (inclusive) and end index (exclusive).

fn execute_on_dest_context_by_caller_raw( &self, gas: u64, to: &ManagedAddress<Self>, amount: &BigUint<Self>, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> ManagedVec<Self, ManagedBuffer<Self>>

fn execute_on_same_context_raw( &self, gas: u64, to: &ManagedAddress<Self>, amount: &BigUint<Self>, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> ManagedVec<Self, ManagedBuffer<Self>>

fn execute_on_dest_context_readonly_raw( &self, gas: u64, to: &ManagedAddress<Self>, endpoint_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> ManagedVec<Self, ManagedBuffer<Self>>

fn storage_store_tx_hash_key(&self, data: &ManagedBuffer<Self>)

Used to store data between async call and callback.

fn storage_load_tx_hash_key(&self) -> ManagedBuffer<Self>

Used to store data between async call and callback.

fn call_local_dct_built_in_function( &self, gas: u64, function_name: &ManagedBuffer<Self>, arg_buffer: &ManagedArgBuffer<Self> ) -> ManagedVec<Self, ManagedBuffer<Self>>

Allows synchronously calling a local function by name. Execution is resumed afterwards. You should never have to call this function directly. Use the other specific methods instead.

impl StorageReadApi for ArwenApiImpl

fn storage_load_len(&self, key: &[u8]) -> usize

fn storage_load_vec_u8(&self, key: &[u8]) -> Vec<u8>

fn storage_load_boxed_bytes(&self, key: &[u8]) -> BoxedBytes

fn storage_load_big_uint_raw(&self, key: &[u8]) -> i32

fn storage_load_managed_buffer_raw(&self, key_handle: Handle) -> Handle

fn storage_load_managed_buffer_len(&self, key_handle: Handle) -> usize

fn storage_load_u64(&self, key: &[u8]) -> u64

fn storage_load_i64(&self, key: &[u8]) -> i64

impl StorageWriteApi for ArwenApiImpl

fn storage_store_slice_u8(&self, key: &[u8], value: &[u8])

fn storage_store_big_uint_raw(&self, key: &[u8], handle: i32)

fn storage_store_managed_buffer_raw( &self, key_handle: Handle, value_handle: Handle )

fn storage_store_managed_buffer_clear(&self, key_handle: Handle)

fn storage_store_u64(&self, key: &[u8], value: u64)

fn storage_store_i64(&self, key: &[u8], value: i64)

impl VMApi for ArwenApiImpl