pub struct Program { /* private fields */ }Expand description
One program: a sound, as the synthesizer stores and sends it.
See the module documentation for what it is and how it travels.
Implementations§
Source§impl Program
The parameters, one pair of accessors each.
impl Program
The parameters, one pair of accessors each.
A getter reads the byte the program holds and a setter writes it. A setter
that takes a raw byte clamps it to what the parameter accepts, since a u8
reaches values a parameter does not; Program::set is the checked way in.
The parameters that spell the program’s name are not here. They are one
string, and Program::name is how a string is read.
Sourcepub fn set_lfo1_rate(&mut self, value: u8)
pub fn set_lfo1_rate(&mut self, value: u8)
Sets LFO 1 Rate, clamped to 0 to 255.
Sourcepub fn lfo1_delay_fade(&self) -> u8
pub fn lfo1_delay_fade(&self) -> u8
LFO 1 Delay / Fade.
Offset 1, 0 to 255.
Sourcepub fn set_lfo1_delay_fade(&mut self, value: u8)
pub fn set_lfo1_delay_fade(&mut self, value: u8)
Sets LFO 1 Delay / Fade, clamped to 0 to 255.
Sourcepub fn lfo1_shape(&self) -> Option<LfoShape>
pub fn lfo1_shape(&self) -> Option<LfoShape>
LFO 1 Shape.
Offset 2. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_lfo1_shape(&mut self, value: LfoShape)
pub fn set_lfo1_shape(&mut self, value: LfoShape)
Sets LFO 1 Shape.
Sourcepub fn lfo1_key_sync(&self) -> bool
pub fn lfo1_key_sync(&self) -> bool
LFO 1 Key Sync.
Offset 3. Off is zero and on is one.
Sourcepub fn set_lfo1_key_sync(&mut self, value: bool)
pub fn set_lfo1_key_sync(&mut self, value: bool)
Sets LFO 1 Key Sync.
Sourcepub fn lfo1_arp_sync(&self) -> bool
pub fn lfo1_arp_sync(&self) -> bool
LFO 1 Arp Sync.
Offset 4. Off is zero and on is one.
Sourcepub fn set_lfo1_arp_sync(&mut self, value: bool)
pub fn set_lfo1_arp_sync(&mut self, value: bool)
Sets LFO 1 Arp Sync.
Sourcepub fn lfo1_mono_mode(&self) -> u8
pub fn lfo1_mono_mode(&self) -> u8
LFO 1 Mono Mode.
Offset 5, 0 to 255.
Sourcepub fn set_lfo1_mono_mode(&mut self, value: u8)
pub fn set_lfo1_mono_mode(&mut self, value: u8)
Sets LFO 1 Mono Mode, clamped to 0 to 255.
Sourcepub fn lfo1_slew_rate(&self) -> u8
pub fn lfo1_slew_rate(&self) -> u8
LFO 1 Slew Rate.
Offset 6, 0 to 255.
Sourcepub fn set_lfo1_slew_rate(&mut self, value: u8)
pub fn set_lfo1_slew_rate(&mut self, value: u8)
Sets LFO 1 Slew Rate, clamped to 0 to 255.
Sourcepub fn set_lfo2_rate(&mut self, value: u8)
pub fn set_lfo2_rate(&mut self, value: u8)
Sets LFO 2 Rate, clamped to 0 to 255.
Sourcepub fn lfo2_delay_fade(&self) -> u8
pub fn lfo2_delay_fade(&self) -> u8
LFO 2 Delay / Fade.
Offset 8, 0 to 255.
Sourcepub fn set_lfo2_delay_fade(&mut self, value: u8)
pub fn set_lfo2_delay_fade(&mut self, value: u8)
Sets LFO 2 Delay / Fade, clamped to 0 to 255.
Sourcepub fn lfo2_shape(&self) -> Option<LfoShape>
pub fn lfo2_shape(&self) -> Option<LfoShape>
LFO 2 Shape.
Offset 9. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_lfo2_shape(&mut self, value: LfoShape)
pub fn set_lfo2_shape(&mut self, value: LfoShape)
Sets LFO 2 Shape.
Sourcepub fn lfo2_key_sync(&self) -> bool
pub fn lfo2_key_sync(&self) -> bool
LFO 2 Key Sync.
Offset 10. Off is zero and on is one.
Sourcepub fn set_lfo2_key_sync(&mut self, value: bool)
pub fn set_lfo2_key_sync(&mut self, value: bool)
Sets LFO 2 Key Sync.
Sourcepub fn lfo2_arp_sync(&self) -> bool
pub fn lfo2_arp_sync(&self) -> bool
LFO 2 Arp Sync.
Offset 11. Off is zero and on is one.
Sourcepub fn set_lfo2_arp_sync(&mut self, value: bool)
pub fn set_lfo2_arp_sync(&mut self, value: bool)
Sets LFO 2 Arp Sync.
Sourcepub fn lfo2_mono_mode(&self) -> u8
pub fn lfo2_mono_mode(&self) -> u8
LFO 2 Mono Mode.
Offset 12, 0 to 255.
Sourcepub fn set_lfo2_mono_mode(&mut self, value: u8)
pub fn set_lfo2_mono_mode(&mut self, value: u8)
Sets LFO 2 Mono Mode, clamped to 0 to 255.
Sourcepub fn lfo2_slew_rate(&self) -> u8
pub fn lfo2_slew_rate(&self) -> u8
LFO 2 Slew Rate.
Offset 13, 0 to 255.
Sourcepub fn set_lfo2_slew_rate(&mut self, value: u8)
pub fn set_lfo2_slew_rate(&mut self, value: u8)
Sets LFO 2 Slew Rate, clamped to 0 to 255.
Sourcepub fn osc1_range(&self) -> Option<OscRange>
pub fn osc1_range(&self) -> Option<OscRange>
OSC 1 Range.
Offset 14. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_osc1_range(&mut self, value: OscRange)
pub fn set_osc1_range(&mut self, value: OscRange)
Sets OSC 1 Range.
Sourcepub fn osc2_range(&self) -> Option<OscRange>
pub fn osc2_range(&self) -> Option<OscRange>
OSC 2 Range.
Offset 15. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_osc2_range(&mut self, value: OscRange)
pub fn set_osc2_range(&mut self, value: OscRange)
Sets OSC 2 Range.
Sourcepub fn osc1_pwm_source(&self) -> Option<PwmSource>
pub fn osc1_pwm_source(&self) -> Option<PwmSource>
OSC 1 PWM Source.
Offset 16. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_osc1_pwm_source(&mut self, value: PwmSource)
pub fn set_osc1_pwm_source(&mut self, value: PwmSource)
Sets OSC 1 PWM Source.
Sourcepub fn osc2_tone_mod_source(&self) -> Option<ToneModSource>
pub fn osc2_tone_mod_source(&self) -> Option<ToneModSource>
OSC 2 Tone Mod Source.
Offset 17. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_osc2_tone_mod_source(&mut self, value: ToneModSource)
pub fn set_osc2_tone_mod_source(&mut self, value: ToneModSource)
Sets OSC 2 Tone Mod Source.
Sourcepub fn osc1_pulse_enable(&self) -> bool
pub fn osc1_pulse_enable(&self) -> bool
OSC 1 Pulse Enable.
Offset 18. Off is zero and on is one.
Sourcepub fn set_osc1_pulse_enable(&mut self, value: bool)
pub fn set_osc1_pulse_enable(&mut self, value: bool)
Sets OSC 1 Pulse Enable.
Sourcepub fn osc1_saw_enable(&self) -> bool
pub fn osc1_saw_enable(&self) -> bool
OSC 1 Saw Enable.
Offset 19. Off is zero and on is one.
Sourcepub fn set_osc1_saw_enable(&mut self, value: bool)
pub fn set_osc1_saw_enable(&mut self, value: bool)
Sets OSC 1 Saw Enable.
Sourcepub fn osc_sync_enable(&self) -> bool
pub fn osc_sync_enable(&self) -> bool
OSC Sync Enable.
Offset 20. Off is zero and on is one.
Sourcepub fn set_osc_sync_enable(&mut self, value: bool)
pub fn set_osc_sync_enable(&mut self, value: bool)
Sets OSC Sync Enable.
Sourcepub fn osc1_pitch_mod_depth(&self) -> u8
pub fn osc1_pitch_mod_depth(&self) -> u8
OSC 1 Pitch Mod Depth.
Offset 21, 0 to 255.
Sourcepub fn set_osc1_pitch_mod_depth(&mut self, value: u8)
pub fn set_osc1_pitch_mod_depth(&mut self, value: u8)
Sets OSC 1 Pitch Mod Depth, clamped to 0 to 255.
Sourcepub fn osc1_pitch_mod_select(&self) -> Option<PitchModSource>
pub fn osc1_pitch_mod_select(&self) -> Option<PitchModSource>
OSC 1 Pitch Mod Select.
Offset 22. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_osc1_pitch_mod_select(&mut self, value: PitchModSource)
pub fn set_osc1_pitch_mod_select(&mut self, value: PitchModSource)
Sets OSC 1 Pitch Mod Select.
Sourcepub fn osc1_aftertouch_to_pitch_mod_depth(&self) -> u8
pub fn osc1_aftertouch_to_pitch_mod_depth(&self) -> u8
OSC 1 Aftertouch > Pitch Mod Depth.
Offset 23, 0 to 255.
Sourcepub fn set_osc1_aftertouch_to_pitch_mod_depth(&mut self, value: u8)
pub fn set_osc1_aftertouch_to_pitch_mod_depth(&mut self, value: u8)
Sets OSC 1 Aftertouch > Pitch Mod Depth, clamped to 0 to 255.
Sourcepub fn osc1_mod_wheel_to_pitch_mod_depth(&self) -> u8
pub fn osc1_mod_wheel_to_pitch_mod_depth(&self) -> u8
OSC 1 Mod Wheel > Pitch Mod Depth.
Offset 24, 0 to 255.
Sourcepub fn set_osc1_mod_wheel_to_pitch_mod_depth(&mut self, value: u8)
pub fn set_osc1_mod_wheel_to_pitch_mod_depth(&mut self, value: u8)
Sets OSC 1 Mod Wheel > Pitch Mod Depth, clamped to 0 to 255.
Sourcepub fn osc1_pwm_depth(&self) -> u8
pub fn osc1_pwm_depth(&self) -> u8
OSC 1 PWM Depth.
Offset 25, 0 to 255.
Sourcepub fn set_osc1_pwm_depth(&mut self, value: u8)
pub fn set_osc1_pwm_depth(&mut self, value: u8)
Sets OSC 1 PWM Depth, clamped to 0 to 255.
Sourcepub fn osc2_level(&self) -> u8
pub fn osc2_level(&self) -> u8
OSC 2 Level.
Offset 26, 0 to 255.
Sourcepub fn set_osc2_level(&mut self, value: u8)
pub fn set_osc2_level(&mut self, value: u8)
Sets OSC 2 Level, clamped to 0 to 255.
Sourcepub fn osc2_pitch(&self) -> u8
pub fn osc2_pitch(&self) -> u8
OSC 2 Pitch.
Offset 27, 0 to 255.
Sourcepub fn set_osc2_pitch(&mut self, value: u8)
pub fn set_osc2_pitch(&mut self, value: u8)
Sets OSC 2 Pitch, clamped to 0 to 255.
Sourcepub fn osc2_tone_mod_depth(&self) -> u8
pub fn osc2_tone_mod_depth(&self) -> u8
OSC 2 Tone Mod Depth.
Offset 28, 0 to 255.
Sourcepub fn set_osc2_tone_mod_depth(&mut self, value: u8)
pub fn set_osc2_tone_mod_depth(&mut self, value: u8)
Sets OSC 2 Tone Mod Depth, clamped to 0 to 255.
Sourcepub fn osc2_pitch_mod_depth(&self) -> u8
pub fn osc2_pitch_mod_depth(&self) -> u8
OSC 2 Pitch Mod Depth.
Offset 29, 0 to 255.
Sourcepub fn set_osc2_pitch_mod_depth(&mut self, value: u8)
pub fn set_osc2_pitch_mod_depth(&mut self, value: u8)
Sets OSC 2 Pitch Mod Depth, clamped to 0 to 255.
Sourcepub fn osc2_aftertouch_to_pitch_mod_depth(&self) -> u8
pub fn osc2_aftertouch_to_pitch_mod_depth(&self) -> u8
OSC 2 Aftertouch > Pitch Mod Depth.
Offset 30, 0 to 255.
Sourcepub fn set_osc2_aftertouch_to_pitch_mod_depth(&mut self, value: u8)
pub fn set_osc2_aftertouch_to_pitch_mod_depth(&mut self, value: u8)
Sets OSC 2 Aftertouch > Pitch Mod Depth, clamped to 0 to 255.
Sourcepub fn osc2_mod_wheel_to_pitch_mod_depth(&self) -> u8
pub fn osc2_mod_wheel_to_pitch_mod_depth(&self) -> u8
OSC 2 Mod Wheel > Pitch Mod Depth.
Offset 31, 0 to 255.
Sourcepub fn set_osc2_mod_wheel_to_pitch_mod_depth(&mut self, value: u8)
pub fn set_osc2_mod_wheel_to_pitch_mod_depth(&mut self, value: u8)
Sets OSC 2 Mod Wheel > Pitch Mod Depth, clamped to 0 to 255.
Sourcepub fn osc2_pitch_mod_select(&self) -> Option<PitchModSource>
pub fn osc2_pitch_mod_select(&self) -> Option<PitchModSource>
OSC 2 Pitch Mod Select.
Offset 32. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_osc2_pitch_mod_select(&mut self, value: PitchModSource)
pub fn set_osc2_pitch_mod_select(&mut self, value: PitchModSource)
Sets OSC 2 Pitch Mod Select.
Sourcepub fn noise_level(&self) -> u8
pub fn noise_level(&self) -> u8
Noise Level.
Offset 33, 0 to 255.
Sourcepub fn set_noise_level(&mut self, value: u8)
pub fn set_noise_level(&mut self, value: u8)
Sets Noise Level, clamped to 0 to 255.
Sourcepub fn portamento_time(&self) -> u8
pub fn portamento_time(&self) -> u8
Portamento time.
Offset 34, 0 to 255.
Sourcepub fn set_portamento_time(&mut self, value: u8)
pub fn set_portamento_time(&mut self, value: u8)
Sets Portamento time, clamped to 0 to 255.
Sourcepub fn portamento_mode(&self) -> Option<PortamentoMode>
pub fn portamento_mode(&self) -> Option<PortamentoMode>
Portamento mode.
Offset 35. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_portamento_mode(&mut self, value: PortamentoMode)
pub fn set_portamento_mode(&mut self, value: PortamentoMode)
Sets Portamento mode.
Sourcepub fn pitch_bend_up_depth(&self) -> u8
pub fn pitch_bend_up_depth(&self) -> u8
Pitch Bend Up Depth.
Offset 36, 0 to 48.
Sourcepub fn set_pitch_bend_up_depth(&mut self, value: u8)
pub fn set_pitch_bend_up_depth(&mut self, value: u8)
Sets Pitch Bend Up Depth, clamped to 0 to 48.
Sourcepub fn pitch_bend_down_depth(&self) -> u8
pub fn pitch_bend_down_depth(&self) -> u8
Pitch Bend Down Depth.
Offset 37, 0 to 48.
Sourcepub fn set_pitch_bend_down_depth(&mut self, value: u8)
pub fn set_pitch_bend_down_depth(&mut self, value: u8)
Sets Pitch Bend Down Depth, clamped to 0 to 48.
Sourcepub fn osc1_pitch_mod_mode(&self) -> Option<Osc1PitchModMode>
pub fn osc1_pitch_mod_mode(&self) -> Option<Osc1PitchModMode>
OSC 1 Pitch Mod Mode.
Offset 38. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_osc1_pitch_mod_mode(&mut self, value: Osc1PitchModMode)
pub fn set_osc1_pitch_mod_mode(&mut self, value: Osc1PitchModMode)
Sets OSC 1 Pitch Mod Mode.
Sourcepub fn vcf_frequency(&self) -> u8
pub fn vcf_frequency(&self) -> u8
VCF Frequency.
Offset 39, 0 to 255.
Sourcepub fn set_vcf_frequency(&mut self, value: u8)
pub fn set_vcf_frequency(&mut self, value: u8)
Sets VCF Frequency, clamped to 0 to 255.
Sourcepub fn vcf_high_pass_frequency(&self) -> u8
pub fn vcf_high_pass_frequency(&self) -> u8
VCF HighPass Frequency.
Offset 40, 0 to 255.
Sourcepub fn set_vcf_high_pass_frequency(&mut self, value: u8)
pub fn set_vcf_high_pass_frequency(&mut self, value: u8)
Sets VCF HighPass Frequency, clamped to 0 to 255.
Sourcepub fn vcf_resonance(&self) -> u8
pub fn vcf_resonance(&self) -> u8
VCF Resonance.
Offset 41, 0 to 255.
Sourcepub fn set_vcf_resonance(&mut self, value: u8)
pub fn set_vcf_resonance(&mut self, value: u8)
Sets VCF Resonance, clamped to 0 to 255.
Sourcepub fn vcf_envelope_depth(&self) -> u8
pub fn vcf_envelope_depth(&self) -> u8
VCF Envelope Depth.
Offset 42, 0 to 255.
Sourcepub fn set_vcf_envelope_depth(&mut self, value: u8)
pub fn set_vcf_envelope_depth(&mut self, value: u8)
Sets VCF Envelope Depth, clamped to 0 to 255.
Sourcepub fn vcf_envelope_velocity_sensitivity(&self) -> u8
pub fn vcf_envelope_velocity_sensitivity(&self) -> u8
VCF Envelope Velocity Sensitivity.
Offset 43, 0 to 255.
Sourcepub fn set_vcf_envelope_velocity_sensitivity(&mut self, value: u8)
pub fn set_vcf_envelope_velocity_sensitivity(&mut self, value: u8)
Sets VCF Envelope Velocity Sensitivity, clamped to 0 to 255.
Sourcepub fn vcf_pitch_bend_to_freq_depth(&self) -> u8
pub fn vcf_pitch_bend_to_freq_depth(&self) -> u8
VCF Pitch Bend to Freq Depth.
Offset 44, 0 to 255.
Sourcepub fn set_vcf_pitch_bend_to_freq_depth(&mut self, value: u8)
pub fn set_vcf_pitch_bend_to_freq_depth(&mut self, value: u8)
Sets VCF Pitch Bend to Freq Depth, clamped to 0 to 255.
Sourcepub fn vcf_lfo_depth(&self) -> u8
pub fn vcf_lfo_depth(&self) -> u8
VCF LFO Depth.
Offset 45, 0 to 255.
Sourcepub fn set_vcf_lfo_depth(&mut self, value: u8)
pub fn set_vcf_lfo_depth(&mut self, value: u8)
Sets VCF LFO Depth, clamped to 0 to 255.
Sourcepub fn vcf_lfo_select(&self) -> Option<VcfLfoSelect>
pub fn vcf_lfo_select(&self) -> Option<VcfLfoSelect>
VCF LFO Select.
Offset 46. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_vcf_lfo_select(&mut self, value: VcfLfoSelect)
pub fn set_vcf_lfo_select(&mut self, value: VcfLfoSelect)
Sets VCF LFO Select.
Sourcepub fn vcf_aftertouch_to_lfo_depth(&self) -> u8
pub fn vcf_aftertouch_to_lfo_depth(&self) -> u8
VCF Aftertouch > LFO Depth.
Offset 47, 0 to 255.
Sourcepub fn set_vcf_aftertouch_to_lfo_depth(&mut self, value: u8)
pub fn set_vcf_aftertouch_to_lfo_depth(&mut self, value: u8)
Sets VCF Aftertouch > LFO Depth, clamped to 0 to 255.
Sourcepub fn vcf_mod_wheel_to_lfo_depth(&self) -> u8
pub fn vcf_mod_wheel_to_lfo_depth(&self) -> u8
VCF Mod Wheel > LFO Depth.
Offset 48, 0 to 255.
Sourcepub fn set_vcf_mod_wheel_to_lfo_depth(&mut self, value: u8)
pub fn set_vcf_mod_wheel_to_lfo_depth(&mut self, value: u8)
Sets VCF Mod Wheel > LFO Depth, clamped to 0 to 255.
Sourcepub fn vcf_keyboard_tracking(&self) -> u8
pub fn vcf_keyboard_tracking(&self) -> u8
VCF Keyboard Tracking.
Offset 49, 0 to 255.
Sourcepub fn set_vcf_keyboard_tracking(&mut self, value: u8)
pub fn set_vcf_keyboard_tracking(&mut self, value: u8)
Sets VCF Keyboard Tracking, clamped to 0 to 255.
Sourcepub fn vcf_envelope_polarity(&self) -> Option<VcfEnvelopePolarity>
pub fn vcf_envelope_polarity(&self) -> Option<VcfEnvelopePolarity>
VCF Envelope Polarity.
Offset 50. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_vcf_envelope_polarity(&mut self, value: VcfEnvelopePolarity)
pub fn set_vcf_envelope_polarity(&mut self, value: VcfEnvelopePolarity)
Sets VCF Envelope Polarity.
Sourcepub fn vcf2_pole_mode(&self) -> Option<VcfPoleMode>
pub fn vcf2_pole_mode(&self) -> Option<VcfPoleMode>
VCF 2 Pole Mode.
Offset 51. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_vcf2_pole_mode(&mut self, value: VcfPoleMode)
pub fn set_vcf2_pole_mode(&mut self, value: VcfPoleMode)
Sets VCF 2 Pole Mode.
Sourcepub fn vcf_bass_boost(&self) -> bool
pub fn vcf_bass_boost(&self) -> bool
VCF Bass Boost.
Offset 52. Off is zero and on is one.
Sourcepub fn set_vcf_bass_boost(&mut self, value: bool)
pub fn set_vcf_bass_boost(&mut self, value: bool)
Sets VCF Bass Boost.
Sourcepub fn vca_envelope_attack_time(&self) -> u8
pub fn vca_envelope_attack_time(&self) -> u8
VCA Envelope Attack Time.
Offset 53, 0 to 255.
Sourcepub fn set_vca_envelope_attack_time(&mut self, value: u8)
pub fn set_vca_envelope_attack_time(&mut self, value: u8)
Sets VCA Envelope Attack Time, clamped to 0 to 255.
Sourcepub fn vca_envelope_decay_time(&self) -> u8
pub fn vca_envelope_decay_time(&self) -> u8
VCA Envelope Decay Time.
Offset 54, 0 to 255.
Sourcepub fn set_vca_envelope_decay_time(&mut self, value: u8)
pub fn set_vca_envelope_decay_time(&mut self, value: u8)
Sets VCA Envelope Decay Time, clamped to 0 to 255.
Sourcepub fn vca_envelope_sustain_level(&self) -> u8
pub fn vca_envelope_sustain_level(&self) -> u8
VCA Envelope Sustain Level.
Offset 55, 0 to 255.
Sourcepub fn set_vca_envelope_sustain_level(&mut self, value: u8)
pub fn set_vca_envelope_sustain_level(&mut self, value: u8)
Sets VCA Envelope Sustain Level, clamped to 0 to 255.
Sourcepub fn vca_envelope_release_time(&self) -> u8
pub fn vca_envelope_release_time(&self) -> u8
VCA Envelope Release Time.
Offset 56, 0 to 255.
Sourcepub fn set_vca_envelope_release_time(&mut self, value: u8)
pub fn set_vca_envelope_release_time(&mut self, value: u8)
Sets VCA Envelope Release Time, clamped to 0 to 255.
Sourcepub fn vca_envelope_trigger_mode(&self) -> Option<EnvelopeTrigger>
pub fn vca_envelope_trigger_mode(&self) -> Option<EnvelopeTrigger>
VCA Envelope Trigger Mode.
Offset 57. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_vca_envelope_trigger_mode(&mut self, value: EnvelopeTrigger)
pub fn set_vca_envelope_trigger_mode(&mut self, value: EnvelopeTrigger)
Sets VCA Envelope Trigger Mode.
Sourcepub fn vca_envelope_attack_curve(&self) -> u8
pub fn vca_envelope_attack_curve(&self) -> u8
VCA Envelope Attack Curve.
Offset 58, 0 to 255.
Sourcepub fn set_vca_envelope_attack_curve(&mut self, value: u8)
pub fn set_vca_envelope_attack_curve(&mut self, value: u8)
Sets VCA Envelope Attack Curve, clamped to 0 to 255.
Sourcepub fn vca_envelope_decay_curve(&self) -> u8
pub fn vca_envelope_decay_curve(&self) -> u8
VCA Envelope Decay Curve.
Offset 59, 0 to 255.
Sourcepub fn set_vca_envelope_decay_curve(&mut self, value: u8)
pub fn set_vca_envelope_decay_curve(&mut self, value: u8)
Sets VCA Envelope Decay Curve, clamped to 0 to 255.
Sourcepub fn vca_envelope_sustain_curve(&self) -> u8
pub fn vca_envelope_sustain_curve(&self) -> u8
VCA Envelope Sustain Curve.
Offset 60, 0 to 255.
Sourcepub fn set_vca_envelope_sustain_curve(&mut self, value: u8)
pub fn set_vca_envelope_sustain_curve(&mut self, value: u8)
Sets VCA Envelope Sustain Curve, clamped to 0 to 255.
Sourcepub fn vca_envelope_release_curve(&self) -> u8
pub fn vca_envelope_release_curve(&self) -> u8
VCA Envelope Release Curve.
Offset 61, 0 to 255.
Sourcepub fn set_vca_envelope_release_curve(&mut self, value: u8)
pub fn set_vca_envelope_release_curve(&mut self, value: u8)
Sets VCA Envelope Release Curve, clamped to 0 to 255.
Sourcepub fn vcf_envelope_attack_time(&self) -> u8
pub fn vcf_envelope_attack_time(&self) -> u8
VCF Envelope Attack Time.
Offset 62, 0 to 255.
Sourcepub fn set_vcf_envelope_attack_time(&mut self, value: u8)
pub fn set_vcf_envelope_attack_time(&mut self, value: u8)
Sets VCF Envelope Attack Time, clamped to 0 to 255.
Sourcepub fn vcf_envelope_decay_time(&self) -> u8
pub fn vcf_envelope_decay_time(&self) -> u8
VCF Envelope Decay Time.
Offset 63, 0 to 255.
Sourcepub fn set_vcf_envelope_decay_time(&mut self, value: u8)
pub fn set_vcf_envelope_decay_time(&mut self, value: u8)
Sets VCF Envelope Decay Time, clamped to 0 to 255.
Sourcepub fn vcf_envelope_sustain_level(&self) -> u8
pub fn vcf_envelope_sustain_level(&self) -> u8
VCF Envelope Sustain Level.
Offset 64, 0 to 255.
Sourcepub fn set_vcf_envelope_sustain_level(&mut self, value: u8)
pub fn set_vcf_envelope_sustain_level(&mut self, value: u8)
Sets VCF Envelope Sustain Level, clamped to 0 to 255.
Sourcepub fn vcf_envelope_release_time(&self) -> u8
pub fn vcf_envelope_release_time(&self) -> u8
VCF Envelope Release Time.
Offset 65, 0 to 255.
Sourcepub fn set_vcf_envelope_release_time(&mut self, value: u8)
pub fn set_vcf_envelope_release_time(&mut self, value: u8)
Sets VCF Envelope Release Time, clamped to 0 to 255.
Sourcepub fn vcf_envelope_trigger_mode(&self) -> Option<EnvelopeTrigger>
pub fn vcf_envelope_trigger_mode(&self) -> Option<EnvelopeTrigger>
VCF Envelope Trigger Mode.
Offset 66. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_vcf_envelope_trigger_mode(&mut self, value: EnvelopeTrigger)
pub fn set_vcf_envelope_trigger_mode(&mut self, value: EnvelopeTrigger)
Sets VCF Envelope Trigger Mode.
Sourcepub fn vcf_envelope_attack_curve(&self) -> u8
pub fn vcf_envelope_attack_curve(&self) -> u8
VCF Envelope Attack Curve.
Offset 67, 0 to 255.
Sourcepub fn set_vcf_envelope_attack_curve(&mut self, value: u8)
pub fn set_vcf_envelope_attack_curve(&mut self, value: u8)
Sets VCF Envelope Attack Curve, clamped to 0 to 255.
Sourcepub fn vcf_envelope_decay_curve(&self) -> u8
pub fn vcf_envelope_decay_curve(&self) -> u8
VCF Envelope Decay Curve.
Offset 68, 0 to 255.
Sourcepub fn set_vcf_envelope_decay_curve(&mut self, value: u8)
pub fn set_vcf_envelope_decay_curve(&mut self, value: u8)
Sets VCF Envelope Decay Curve, clamped to 0 to 255.
Sourcepub fn vcf_envelope_sustain_curve(&self) -> u8
pub fn vcf_envelope_sustain_curve(&self) -> u8
VCF Envelope Sustain Curve.
Offset 69, 0 to 255.
Sourcepub fn set_vcf_envelope_sustain_curve(&mut self, value: u8)
pub fn set_vcf_envelope_sustain_curve(&mut self, value: u8)
Sets VCF Envelope Sustain Curve, clamped to 0 to 255.
Sourcepub fn vcf_envelope_release_curve(&self) -> u8
pub fn vcf_envelope_release_curve(&self) -> u8
VCF Envelope Release Curve.
Offset 70, 0 to 255.
Sourcepub fn set_vcf_envelope_release_curve(&mut self, value: u8)
pub fn set_vcf_envelope_release_curve(&mut self, value: u8)
Sets VCF Envelope Release Curve, clamped to 0 to 255.
Sourcepub fn mod_envelope_attack_time(&self) -> u8
pub fn mod_envelope_attack_time(&self) -> u8
Mod Envelope Attack Time.
Offset 71, 0 to 255.
Sourcepub fn set_mod_envelope_attack_time(&mut self, value: u8)
pub fn set_mod_envelope_attack_time(&mut self, value: u8)
Sets Mod Envelope Attack Time, clamped to 0 to 255.
Sourcepub fn mod_envelope_decay_time(&self) -> u8
pub fn mod_envelope_decay_time(&self) -> u8
Mod Envelope Decay Time.
Offset 72, 0 to 255.
Sourcepub fn set_mod_envelope_decay_time(&mut self, value: u8)
pub fn set_mod_envelope_decay_time(&mut self, value: u8)
Sets Mod Envelope Decay Time, clamped to 0 to 255.
Sourcepub fn mod_envelope_sustain_level(&self) -> u8
pub fn mod_envelope_sustain_level(&self) -> u8
Mod Envelope Sustain Level.
Offset 73, 0 to 255.
Sourcepub fn set_mod_envelope_sustain_level(&mut self, value: u8)
pub fn set_mod_envelope_sustain_level(&mut self, value: u8)
Sets Mod Envelope Sustain Level, clamped to 0 to 255.
Sourcepub fn mod_envelope_release_time(&self) -> u8
pub fn mod_envelope_release_time(&self) -> u8
Mod Envelope Release Time.
Offset 74, 0 to 255.
Sourcepub fn set_mod_envelope_release_time(&mut self, value: u8)
pub fn set_mod_envelope_release_time(&mut self, value: u8)
Sets Mod Envelope Release Time, clamped to 0 to 255.
Sourcepub fn mod_envelope_trigger_mode(&self) -> Option<EnvelopeTrigger>
pub fn mod_envelope_trigger_mode(&self) -> Option<EnvelopeTrigger>
Mod Envelope Trigger Mode.
Offset 75. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod_envelope_trigger_mode(&mut self, value: EnvelopeTrigger)
pub fn set_mod_envelope_trigger_mode(&mut self, value: EnvelopeTrigger)
Sets Mod Envelope Trigger Mode.
Sourcepub fn mod_envelope_attack_curve(&self) -> u8
pub fn mod_envelope_attack_curve(&self) -> u8
Mod Envelope Attack Curve.
Offset 76, 0 to 255.
Sourcepub fn set_mod_envelope_attack_curve(&mut self, value: u8)
pub fn set_mod_envelope_attack_curve(&mut self, value: u8)
Sets Mod Envelope Attack Curve, clamped to 0 to 255.
Sourcepub fn mod_envelope_decay_curve(&self) -> u8
pub fn mod_envelope_decay_curve(&self) -> u8
Mod Envelope Decay Curve.
Offset 77, 0 to 255.
Sourcepub fn set_mod_envelope_decay_curve(&mut self, value: u8)
pub fn set_mod_envelope_decay_curve(&mut self, value: u8)
Sets Mod Envelope Decay Curve, clamped to 0 to 255.
Sourcepub fn mod_envelope_sustain_curve(&self) -> u8
pub fn mod_envelope_sustain_curve(&self) -> u8
Mod Envelope Sustain Curve.
Offset 78, 0 to 255.
Sourcepub fn set_mod_envelope_sustain_curve(&mut self, value: u8)
pub fn set_mod_envelope_sustain_curve(&mut self, value: u8)
Sets Mod Envelope Sustain Curve, clamped to 0 to 255.
Sourcepub fn mod_envelope_release_curve(&self) -> u8
pub fn mod_envelope_release_curve(&self) -> u8
Mod Envelope Release Curve.
Offset 79, 0 to 255.
Sourcepub fn set_mod_envelope_release_curve(&mut self, value: u8)
pub fn set_mod_envelope_release_curve(&mut self, value: u8)
Sets Mod Envelope Release Curve, clamped to 0 to 255.
Sourcepub fn set_vca_level(&mut self, value: u8)
pub fn set_vca_level(&mut self, value: u8)
Sets VCA Level, clamped to 0 to 255.
Sourcepub fn vca_envelope_depth(&self) -> u8
pub fn vca_envelope_depth(&self) -> u8
VCA Envelope Depth.
Offset 81, 0 to 255.
Sourcepub fn set_vca_envelope_depth(&mut self, value: u8)
pub fn set_vca_envelope_depth(&mut self, value: u8)
Sets VCA Envelope Depth, clamped to 0 to 255.
Sourcepub fn vca_envelope_velocity_sensitivity(&self) -> u8
pub fn vca_envelope_velocity_sensitivity(&self) -> u8
VCA Envelope Velocity Sensitivity.
Offset 82, 0 to 255.
Sourcepub fn set_vca_envelope_velocity_sensitivity(&mut self, value: u8)
pub fn set_vca_envelope_velocity_sensitivity(&mut self, value: u8)
Sets VCA Envelope Velocity Sensitivity, clamped to 0 to 255.
Sourcepub fn vca_pan_spread(&self) -> u8
pub fn vca_pan_spread(&self) -> u8
VCA Pan Spread.
Offset 83, 0 to 255.
Sourcepub fn set_vca_pan_spread(&mut self, value: u8)
pub fn set_vca_pan_spread(&mut self, value: u8)
Sets VCA Pan Spread, clamped to 0 to 255.
Sourcepub fn voice_priority_mode(&self) -> Option<VoicePriority>
pub fn voice_priority_mode(&self) -> Option<VoicePriority>
Voice Priority Mode.
Offset 84. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_voice_priority_mode(&mut self, value: VoicePriority)
pub fn set_voice_priority_mode(&mut self, value: VoicePriority)
Sets Voice Priority Mode.
Sourcepub fn polyphony_mode(&self) -> Option<PolyphonyMode>
pub fn polyphony_mode(&self) -> Option<PolyphonyMode>
Polyphony Mode.
Offset 85. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_polyphony_mode(&mut self, value: PolyphonyMode)
pub fn set_polyphony_mode(&mut self, value: PolyphonyMode)
Sets Polyphony Mode.
Sourcepub fn envelope_trigger_mode(&self) -> Option<KeyAssignMode>
pub fn envelope_trigger_mode(&self) -> Option<KeyAssignMode>
Envelope Trigger Mode.
Offset 86. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_envelope_trigger_mode(&mut self, value: KeyAssignMode)
pub fn set_envelope_trigger_mode(&mut self, value: KeyAssignMode)
Sets Envelope Trigger Mode.
Sourcepub fn unison_detune(&self) -> u8
pub fn unison_detune(&self) -> u8
Unison Detune.
Offset 87, 0 to 255.
Sourcepub fn set_unison_detune(&mut self, value: u8)
pub fn set_unison_detune(&mut self, value: u8)
Sets Unison Detune, clamped to 0 to 255.
Sourcepub fn voice_drift(&self) -> u8
pub fn voice_drift(&self) -> u8
Voice Drift.
Offset 88, 0 to 255.
Sourcepub fn set_voice_drift(&mut self, value: u8)
pub fn set_voice_drift(&mut self, value: u8)
Sets Voice Drift, clamped to 0 to 255.
Sourcepub fn parameter_drift(&self) -> u8
pub fn parameter_drift(&self) -> u8
Parameter Drift.
Offset 89, 0 to 255.
Sourcepub fn set_parameter_drift(&mut self, value: u8)
pub fn set_parameter_drift(&mut self, value: u8)
Sets Parameter Drift, clamped to 0 to 255.
Sourcepub fn drift_rate(&self) -> u8
pub fn drift_rate(&self) -> u8
Drift Rate.
Offset 90, 0 to 255.
Sourcepub fn set_drift_rate(&mut self, value: u8)
pub fn set_drift_rate(&mut self, value: u8)
Sets Drift Rate, clamped to 0 to 255.
Sourcepub fn osc_portamento_balance(&self) -> u8
pub fn osc_portamento_balance(&self) -> u8
OSC Portamento Balance.
Offset 91, 0 to 255.
Sourcepub fn set_osc_portamento_balance(&mut self, value: u8)
pub fn set_osc_portamento_balance(&mut self, value: u8)
Sets OSC Portamento Balance, clamped to 0 to 255.
Sourcepub fn osc_key_down_reset(&self) -> bool
pub fn osc_key_down_reset(&self) -> bool
OSC Key Down Reset.
Offset 92. Off is zero and on is one.
Sourcepub fn set_osc_key_down_reset(&mut self, value: bool)
pub fn set_osc_key_down_reset(&mut self, value: bool)
Sets OSC Key Down Reset.
Sourcepub fn mod1_source(&self) -> Option<ModSource>
pub fn mod1_source(&self) -> Option<ModSource>
Mod 1 Source.
Offset 93. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod1_source(&mut self, value: ModSource)
pub fn set_mod1_source(&mut self, value: ModSource)
Sets Mod 1 Source.
Sourcepub fn mod1_destination(&self) -> Option<ModDestination>
pub fn mod1_destination(&self) -> Option<ModDestination>
Mod 1 Destination.
Offset 94. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod1_destination(&mut self, value: ModDestination)
pub fn set_mod1_destination(&mut self, value: ModDestination)
Sets Mod 1 Destination.
Sourcepub fn mod1_depth(&self) -> u8
pub fn mod1_depth(&self) -> u8
Mod 1 Depth.
Offset 95, 0 to 255.
Sourcepub fn set_mod1_depth(&mut self, value: u8)
pub fn set_mod1_depth(&mut self, value: u8)
Sets Mod 1 Depth, clamped to 0 to 255.
Sourcepub fn mod2_source(&self) -> Option<ModSource>
pub fn mod2_source(&self) -> Option<ModSource>
Mod 2 Source.
Offset 96. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod2_source(&mut self, value: ModSource)
pub fn set_mod2_source(&mut self, value: ModSource)
Sets Mod 2 Source.
Sourcepub fn mod2_destination(&self) -> Option<ModDestination>
pub fn mod2_destination(&self) -> Option<ModDestination>
Mod 2 Destination.
Offset 97. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod2_destination(&mut self, value: ModDestination)
pub fn set_mod2_destination(&mut self, value: ModDestination)
Sets Mod 2 Destination.
Sourcepub fn mod2_depth(&self) -> u8
pub fn mod2_depth(&self) -> u8
Mod 2 Depth.
Offset 98, 0 to 255.
Sourcepub fn set_mod2_depth(&mut self, value: u8)
pub fn set_mod2_depth(&mut self, value: u8)
Sets Mod 2 Depth, clamped to 0 to 255.
Sourcepub fn mod3_source(&self) -> Option<ModSource>
pub fn mod3_source(&self) -> Option<ModSource>
Mod 3 Source.
Offset 99. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod3_source(&mut self, value: ModSource)
pub fn set_mod3_source(&mut self, value: ModSource)
Sets Mod 3 Source.
Sourcepub fn mod3_destination(&self) -> Option<ModDestination>
pub fn mod3_destination(&self) -> Option<ModDestination>
Mod 3 Destination.
Offset 100. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod3_destination(&mut self, value: ModDestination)
pub fn set_mod3_destination(&mut self, value: ModDestination)
Sets Mod 3 Destination.
Sourcepub fn mod3_depth(&self) -> u8
pub fn mod3_depth(&self) -> u8
Mod 3 Depth.
Offset 101, 0 to 255.
Sourcepub fn set_mod3_depth(&mut self, value: u8)
pub fn set_mod3_depth(&mut self, value: u8)
Sets Mod 3 Depth, clamped to 0 to 255.
Sourcepub fn mod4_source(&self) -> Option<ModSource>
pub fn mod4_source(&self) -> Option<ModSource>
Mod 4 Source.
Offset 102. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod4_source(&mut self, value: ModSource)
pub fn set_mod4_source(&mut self, value: ModSource)
Sets Mod 4 Source.
Sourcepub fn mod4_destination(&self) -> Option<ModDestination>
pub fn mod4_destination(&self) -> Option<ModDestination>
Mod 4 Destination.
Offset 103. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod4_destination(&mut self, value: ModDestination)
pub fn set_mod4_destination(&mut self, value: ModDestination)
Sets Mod 4 Destination.
Sourcepub fn mod4_depth(&self) -> u8
pub fn mod4_depth(&self) -> u8
Mod 4 Depth.
Offset 104, 0 to 255.
Sourcepub fn set_mod4_depth(&mut self, value: u8)
pub fn set_mod4_depth(&mut self, value: u8)
Sets Mod 4 Depth, clamped to 0 to 255.
Sourcepub fn mod5_source(&self) -> Option<ModSource>
pub fn mod5_source(&self) -> Option<ModSource>
Mod 5 Source.
Offset 105. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod5_source(&mut self, value: ModSource)
pub fn set_mod5_source(&mut self, value: ModSource)
Sets Mod 5 Source.
Sourcepub fn mod5_destination(&self) -> Option<ModDestination>
pub fn mod5_destination(&self) -> Option<ModDestination>
Mod 5 Destination.
Offset 106. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod5_destination(&mut self, value: ModDestination)
pub fn set_mod5_destination(&mut self, value: ModDestination)
Sets Mod 5 Destination.
Sourcepub fn mod5_depth(&self) -> u8
pub fn mod5_depth(&self) -> u8
Mod 5 Depth.
Offset 107, 0 to 255.
Sourcepub fn set_mod5_depth(&mut self, value: u8)
pub fn set_mod5_depth(&mut self, value: u8)
Sets Mod 5 Depth, clamped to 0 to 255.
Sourcepub fn mod6_source(&self) -> Option<ModSource>
pub fn mod6_source(&self) -> Option<ModSource>
Mod 6 Source.
Offset 108. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod6_source(&mut self, value: ModSource)
pub fn set_mod6_source(&mut self, value: ModSource)
Sets Mod 6 Source.
Sourcepub fn mod6_destination(&self) -> Option<ModDestination>
pub fn mod6_destination(&self) -> Option<ModDestination>
Mod 6 Destination.
Offset 109. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod6_destination(&mut self, value: ModDestination)
pub fn set_mod6_destination(&mut self, value: ModDestination)
Sets Mod 6 Destination.
Sourcepub fn mod6_depth(&self) -> u8
pub fn mod6_depth(&self) -> u8
Mod 6 Depth.
Offset 110, 0 to 255.
Sourcepub fn set_mod6_depth(&mut self, value: u8)
pub fn set_mod6_depth(&mut self, value: u8)
Sets Mod 6 Depth, clamped to 0 to 255.
Sourcepub fn mod7_source(&self) -> Option<ModSource>
pub fn mod7_source(&self) -> Option<ModSource>
Mod 7 Source.
Offset 111. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod7_source(&mut self, value: ModSource)
pub fn set_mod7_source(&mut self, value: ModSource)
Sets Mod 7 Source.
Sourcepub fn mod7_destination(&self) -> Option<ModDestination>
pub fn mod7_destination(&self) -> Option<ModDestination>
Mod 7 Destination.
Offset 112. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod7_destination(&mut self, value: ModDestination)
pub fn set_mod7_destination(&mut self, value: ModDestination)
Sets Mod 7 Destination.
Sourcepub fn mod7_depth(&self) -> u8
pub fn mod7_depth(&self) -> u8
Mod 7 Depth.
Offset 113, 0 to 255.
Sourcepub fn set_mod7_depth(&mut self, value: u8)
pub fn set_mod7_depth(&mut self, value: u8)
Sets Mod 7 Depth, clamped to 0 to 255.
Sourcepub fn mod8_source(&self) -> Option<ModSource>
pub fn mod8_source(&self) -> Option<ModSource>
Mod 8 Source.
Offset 114. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod8_source(&mut self, value: ModSource)
pub fn set_mod8_source(&mut self, value: ModSource)
Sets Mod 8 Source.
Sourcepub fn mod8_destination(&self) -> Option<ModDestination>
pub fn mod8_destination(&self) -> Option<ModDestination>
Mod 8 Destination.
Offset 115. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_mod8_destination(&mut self, value: ModDestination)
pub fn set_mod8_destination(&mut self, value: ModDestination)
Sets Mod 8 Destination.
Sourcepub fn mod8_depth(&self) -> u8
pub fn mod8_depth(&self) -> u8
Mod 8 Depth.
Offset 116, 0 to 255.
Sourcepub fn set_mod8_depth(&mut self, value: u8)
pub fn set_mod8_depth(&mut self, value: u8)
Sets Mod 8 Depth, clamped to 0 to 255.
Sourcepub fn ctrl_sequencer_enable(&self) -> bool
pub fn ctrl_sequencer_enable(&self) -> bool
Ctrl Sequencer Enable.
Offset 117. Off is zero and on is one.
Sourcepub fn set_ctrl_sequencer_enable(&mut self, value: bool)
pub fn set_ctrl_sequencer_enable(&mut self, value: bool)
Sets Ctrl Sequencer Enable.
Sourcepub fn ctrl_sequencer_clock_divider(&self) -> u8
pub fn ctrl_sequencer_clock_divider(&self) -> u8
Ctrl Sequencer Clock Divider.
Offset 118, 0 to 15.
Sourcepub fn set_ctrl_sequencer_clock_divider(&mut self, value: u8)
pub fn set_ctrl_sequencer_clock_divider(&mut self, value: u8)
Sets Ctrl Sequencer Clock Divider, clamped to 0 to 15.
Sourcepub fn sequence_length(&self) -> u8
pub fn sequence_length(&self) -> u8
Sequence Length.
Offset 119, 0 to 31.
Sourcepub fn set_sequence_length(&mut self, value: u8)
pub fn set_sequence_length(&mut self, value: u8)
Sets Sequence Length, clamped to 0 to 31.
Sourcepub fn sequencer_swing_timing(&self) -> u8
pub fn sequencer_swing_timing(&self) -> u8
Sequencer Swing Timing.
Offset 120, 0 to 255.
Sourcepub fn set_sequencer_swing_timing(&mut self, value: u8)
pub fn set_sequencer_swing_timing(&mut self, value: u8)
Sets Sequencer Swing Timing, clamped to 0 to 255.
Sourcepub fn key_sync_and_loop(&self) -> Option<SequencerSync>
pub fn key_sync_and_loop(&self) -> Option<SequencerSync>
Key Sync & Loop.
Offset 121. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_key_sync_and_loop(&mut self, value: SequencerSync)
pub fn set_key_sync_and_loop(&mut self, value: SequencerSync)
Sets Key Sync & Loop.
Sourcepub fn set_slew_rate(&mut self, value: u8)
pub fn set_slew_rate(&mut self, value: u8)
Sets Slew Rate, clamped to 0 to 255.
Sourcepub fn seq_step_value1(&self) -> u8
pub fn seq_step_value1(&self) -> u8
Seq Step Value 1.
Offset 123, 0 to 255.
Sourcepub fn set_seq_step_value1(&mut self, value: u8)
pub fn set_seq_step_value1(&mut self, value: u8)
Sets Seq Step Value 1, clamped to 0 to 255.
Sourcepub fn seq_step_value2(&self) -> u8
pub fn seq_step_value2(&self) -> u8
Seq Step Value 2.
Offset 124, 0 to 255.
Sourcepub fn set_seq_step_value2(&mut self, value: u8)
pub fn set_seq_step_value2(&mut self, value: u8)
Sets Seq Step Value 2, clamped to 0 to 255.
Sourcepub fn seq_step_value3(&self) -> u8
pub fn seq_step_value3(&self) -> u8
Seq Step Value 3.
Offset 125, 0 to 255.
Sourcepub fn set_seq_step_value3(&mut self, value: u8)
pub fn set_seq_step_value3(&mut self, value: u8)
Sets Seq Step Value 3, clamped to 0 to 255.
Sourcepub fn seq_step_value4(&self) -> u8
pub fn seq_step_value4(&self) -> u8
Seq Step Value 4.
Offset 126, 0 to 255.
Sourcepub fn set_seq_step_value4(&mut self, value: u8)
pub fn set_seq_step_value4(&mut self, value: u8)
Sets Seq Step Value 4, clamped to 0 to 255.
Sourcepub fn seq_step_value5(&self) -> u8
pub fn seq_step_value5(&self) -> u8
Seq Step Value 5.
Offset 127, 0 to 255.
Sourcepub fn set_seq_step_value5(&mut self, value: u8)
pub fn set_seq_step_value5(&mut self, value: u8)
Sets Seq Step Value 5, clamped to 0 to 255.
Sourcepub fn seq_step_value6(&self) -> u8
pub fn seq_step_value6(&self) -> u8
Seq Step Value 6.
Offset 128, 0 to 255.
Sourcepub fn set_seq_step_value6(&mut self, value: u8)
pub fn set_seq_step_value6(&mut self, value: u8)
Sets Seq Step Value 6, clamped to 0 to 255.
Sourcepub fn seq_step_value7(&self) -> u8
pub fn seq_step_value7(&self) -> u8
Seq Step Value 7.
Offset 129, 0 to 255.
Sourcepub fn set_seq_step_value7(&mut self, value: u8)
pub fn set_seq_step_value7(&mut self, value: u8)
Sets Seq Step Value 7, clamped to 0 to 255.
Sourcepub fn seq_step_value8(&self) -> u8
pub fn seq_step_value8(&self) -> u8
Seq Step Value 8.
Offset 130, 0 to 255.
Sourcepub fn set_seq_step_value8(&mut self, value: u8)
pub fn set_seq_step_value8(&mut self, value: u8)
Sets Seq Step Value 8, clamped to 0 to 255.
Sourcepub fn seq_step_value9(&self) -> u8
pub fn seq_step_value9(&self) -> u8
Seq Step Value 9.
Offset 131, 0 to 255.
Sourcepub fn set_seq_step_value9(&mut self, value: u8)
pub fn set_seq_step_value9(&mut self, value: u8)
Sets Seq Step Value 9, clamped to 0 to 255.
Sourcepub fn seq_step_value10(&self) -> u8
pub fn seq_step_value10(&self) -> u8
Seq Step Value 10.
Offset 132, 0 to 255.
Sourcepub fn set_seq_step_value10(&mut self, value: u8)
pub fn set_seq_step_value10(&mut self, value: u8)
Sets Seq Step Value 10, clamped to 0 to 255.
Sourcepub fn seq_step_value11(&self) -> u8
pub fn seq_step_value11(&self) -> u8
Seq Step Value 11.
Offset 133, 0 to 255.
Sourcepub fn set_seq_step_value11(&mut self, value: u8)
pub fn set_seq_step_value11(&mut self, value: u8)
Sets Seq Step Value 11, clamped to 0 to 255.
Sourcepub fn seq_step_value12(&self) -> u8
pub fn seq_step_value12(&self) -> u8
Seq Step Value 12.
Offset 134, 0 to 255.
Sourcepub fn set_seq_step_value12(&mut self, value: u8)
pub fn set_seq_step_value12(&mut self, value: u8)
Sets Seq Step Value 12, clamped to 0 to 255.
Sourcepub fn seq_step_value13(&self) -> u8
pub fn seq_step_value13(&self) -> u8
Seq Step Value 13.
Offset 135, 0 to 255.
Sourcepub fn set_seq_step_value13(&mut self, value: u8)
pub fn set_seq_step_value13(&mut self, value: u8)
Sets Seq Step Value 13, clamped to 0 to 255.
Sourcepub fn seq_step_value14(&self) -> u8
pub fn seq_step_value14(&self) -> u8
Seq Step Value 14.
Offset 136, 0 to 255.
Sourcepub fn set_seq_step_value14(&mut self, value: u8)
pub fn set_seq_step_value14(&mut self, value: u8)
Sets Seq Step Value 14, clamped to 0 to 255.
Sourcepub fn seq_step_value15(&self) -> u8
pub fn seq_step_value15(&self) -> u8
Seq Step Value 15.
Offset 137, 0 to 255.
Sourcepub fn set_seq_step_value15(&mut self, value: u8)
pub fn set_seq_step_value15(&mut self, value: u8)
Sets Seq Step Value 15, clamped to 0 to 255.
Sourcepub fn seq_step_value16(&self) -> u8
pub fn seq_step_value16(&self) -> u8
Seq Step Value 16.
Offset 138, 0 to 255.
Sourcepub fn set_seq_step_value16(&mut self, value: u8)
pub fn set_seq_step_value16(&mut self, value: u8)
Sets Seq Step Value 16, clamped to 0 to 255.
Sourcepub fn seq_step_value17(&self) -> u8
pub fn seq_step_value17(&self) -> u8
Seq Step Value 17.
Offset 139, 0 to 255.
Sourcepub fn set_seq_step_value17(&mut self, value: u8)
pub fn set_seq_step_value17(&mut self, value: u8)
Sets Seq Step Value 17, clamped to 0 to 255.
Sourcepub fn seq_step_value18(&self) -> u8
pub fn seq_step_value18(&self) -> u8
Seq Step Value 18.
Offset 140, 0 to 255.
Sourcepub fn set_seq_step_value18(&mut self, value: u8)
pub fn set_seq_step_value18(&mut self, value: u8)
Sets Seq Step Value 18, clamped to 0 to 255.
Sourcepub fn seq_step_value19(&self) -> u8
pub fn seq_step_value19(&self) -> u8
Seq Step Value 19.
Offset 141, 0 to 255.
Sourcepub fn set_seq_step_value19(&mut self, value: u8)
pub fn set_seq_step_value19(&mut self, value: u8)
Sets Seq Step Value 19, clamped to 0 to 255.
Sourcepub fn seq_step_value20(&self) -> u8
pub fn seq_step_value20(&self) -> u8
Seq Step Value 20.
Offset 142, 0 to 255.
Sourcepub fn set_seq_step_value20(&mut self, value: u8)
pub fn set_seq_step_value20(&mut self, value: u8)
Sets Seq Step Value 20, clamped to 0 to 255.
Sourcepub fn seq_step_value21(&self) -> u8
pub fn seq_step_value21(&self) -> u8
Seq Step Value 21.
Offset 143, 0 to 255.
Sourcepub fn set_seq_step_value21(&mut self, value: u8)
pub fn set_seq_step_value21(&mut self, value: u8)
Sets Seq Step Value 21, clamped to 0 to 255.
Sourcepub fn seq_step_value22(&self) -> u8
pub fn seq_step_value22(&self) -> u8
Seq Step Value 22.
Offset 144, 0 to 255.
Sourcepub fn set_seq_step_value22(&mut self, value: u8)
pub fn set_seq_step_value22(&mut self, value: u8)
Sets Seq Step Value 22, clamped to 0 to 255.
Sourcepub fn seq_step_value23(&self) -> u8
pub fn seq_step_value23(&self) -> u8
Seq Step Value 23.
Offset 145, 0 to 255.
Sourcepub fn set_seq_step_value23(&mut self, value: u8)
pub fn set_seq_step_value23(&mut self, value: u8)
Sets Seq Step Value 23, clamped to 0 to 255.
Sourcepub fn seq_step_value24(&self) -> u8
pub fn seq_step_value24(&self) -> u8
Seq Step Value 24.
Offset 146, 0 to 255.
Sourcepub fn set_seq_step_value24(&mut self, value: u8)
pub fn set_seq_step_value24(&mut self, value: u8)
Sets Seq Step Value 24, clamped to 0 to 255.
Sourcepub fn seq_step_value25(&self) -> u8
pub fn seq_step_value25(&self) -> u8
Seq Step Value 25.
Offset 147, 0 to 255.
Sourcepub fn set_seq_step_value25(&mut self, value: u8)
pub fn set_seq_step_value25(&mut self, value: u8)
Sets Seq Step Value 25, clamped to 0 to 255.
Sourcepub fn seq_step_value26(&self) -> u8
pub fn seq_step_value26(&self) -> u8
Seq Step Value 26.
Offset 148, 0 to 255.
Sourcepub fn set_seq_step_value26(&mut self, value: u8)
pub fn set_seq_step_value26(&mut self, value: u8)
Sets Seq Step Value 26, clamped to 0 to 255.
Sourcepub fn seq_step_value27(&self) -> u8
pub fn seq_step_value27(&self) -> u8
Seq Step Value 27.
Offset 149, 0 to 255.
Sourcepub fn set_seq_step_value27(&mut self, value: u8)
pub fn set_seq_step_value27(&mut self, value: u8)
Sets Seq Step Value 27, clamped to 0 to 255.
Sourcepub fn seq_step_value28(&self) -> u8
pub fn seq_step_value28(&self) -> u8
Seq Step Value 28.
Offset 150, 0 to 255.
Sourcepub fn set_seq_step_value28(&mut self, value: u8)
pub fn set_seq_step_value28(&mut self, value: u8)
Sets Seq Step Value 28, clamped to 0 to 255.
Sourcepub fn seq_step_value29(&self) -> u8
pub fn seq_step_value29(&self) -> u8
Seq Step Value 29.
Offset 151, 0 to 255.
Sourcepub fn set_seq_step_value29(&mut self, value: u8)
pub fn set_seq_step_value29(&mut self, value: u8)
Sets Seq Step Value 29, clamped to 0 to 255.
Sourcepub fn seq_step_value30(&self) -> u8
pub fn seq_step_value30(&self) -> u8
Seq Step Value 30.
Offset 152, 0 to 255.
Sourcepub fn set_seq_step_value30(&mut self, value: u8)
pub fn set_seq_step_value30(&mut self, value: u8)
Sets Seq Step Value 30, clamped to 0 to 255.
Sourcepub fn seq_step_value31(&self) -> u8
pub fn seq_step_value31(&self) -> u8
Seq Step Value 31.
Offset 153, 0 to 255.
Sourcepub fn set_seq_step_value31(&mut self, value: u8)
pub fn set_seq_step_value31(&mut self, value: u8)
Sets Seq Step Value 31, clamped to 0 to 255.
Sourcepub fn seq_step_value32(&self) -> u8
pub fn seq_step_value32(&self) -> u8
Seq Step Value 32.
Offset 154, 0 to 255.
Sourcepub fn set_seq_step_value32(&mut self, value: u8)
pub fn set_seq_step_value32(&mut self, value: u8)
Sets Seq Step Value 32, clamped to 0 to 255.
Sourcepub fn arp_on_off(&self) -> bool
pub fn arp_on_off(&self) -> bool
Arp On/Off.
Offset 155. Off is zero and on is one.
Sourcepub fn set_arp_on_off(&mut self, value: bool)
pub fn set_arp_on_off(&mut self, value: bool)
Sets Arp On/Off.
Sourcepub fn arp_mode(&self) -> Option<ArpMode>
pub fn arp_mode(&self) -> Option<ArpMode>
Arp Mode.
Offset 156. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_arp_mode(&mut self, value: ArpMode)
pub fn set_arp_mode(&mut self, value: ArpMode)
Sets Arp Mode.
Sourcepub fn arp_rate_tempo(&self) -> u8
pub fn arp_rate_tempo(&self) -> u8
Arp Rate (tempo).
Offset 157, 0 to 255.
Sourcepub fn set_arp_rate_tempo(&mut self, value: u8)
pub fn set_arp_rate_tempo(&mut self, value: u8)
Sets Arp Rate (tempo), clamped to 0 to 255.
Sourcepub fn set_arp_clock(&mut self, value: u8)
pub fn set_arp_clock(&mut self, value: u8)
Sets Arp Clock, clamped to 0 to 12.
Sourcepub fn arp_key_sync(&self) -> bool
pub fn arp_key_sync(&self) -> bool
Arp Key Sync.
Offset 159. Off is zero and on is one.
Sourcepub fn set_arp_key_sync(&mut self, value: bool)
pub fn set_arp_key_sync(&mut self, value: bool)
Sets Arp Key Sync.
Sourcepub fn arp_gate_time(&self) -> u8
pub fn arp_gate_time(&self) -> u8
Arp Gate Time.
Offset 160, 0 to 255.
Sourcepub fn set_arp_gate_time(&mut self, value: u8)
pub fn set_arp_gate_time(&mut self, value: u8)
Sets Arp Gate Time, clamped to 0 to 255.
Sourcepub fn set_arp_hold(&mut self, value: bool)
pub fn set_arp_hold(&mut self, value: bool)
Sets Arp Hold.
Sourcepub fn arp_pattern(&self) -> u8
pub fn arp_pattern(&self) -> u8
Arp Pattern.
Offset 162, 0 to 64.
Sourcepub fn set_arp_pattern(&mut self, value: u8)
pub fn set_arp_pattern(&mut self, value: u8)
Sets Arp Pattern, clamped to 0 to 64.
Sourcepub fn set_arp_swing(&mut self, value: u8)
pub fn set_arp_swing(&mut self, value: u8)
Sets Arp Swing, clamped to 0 to 255.
Sourcepub fn arp_octaves(&self) -> u8
pub fn arp_octaves(&self) -> u8
Arp Octaves.
Offset 164, 0 to 5.
Sourcepub fn set_arp_octaves(&mut self, value: u8)
pub fn set_arp_octaves(&mut self, value: u8)
Sets Arp Octaves, clamped to 0 to 5.
Sourcepub fn fx_routing(&self) -> Option<FxRouting>
pub fn fx_routing(&self) -> Option<FxRouting>
FX Routing.
Offset 165. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_fx_routing(&mut self, value: FxRouting)
pub fn set_fx_routing(&mut self, value: FxRouting)
Sets FX Routing.
Sourcepub fn fx1_type(&self) -> Option<FxType>
pub fn fx1_type(&self) -> Option<FxType>
FX 1 Type.
Offset 166. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_fx1_type(&mut self, value: FxType)
pub fn set_fx1_type(&mut self, value: FxType)
Sets FX 1 Type.
Sourcepub fn fx1_param1(&self) -> u8
pub fn fx1_param1(&self) -> u8
FX 1 Param 1.
Offset 167, 0 to 255.
Sourcepub fn set_fx1_param1(&mut self, value: u8)
pub fn set_fx1_param1(&mut self, value: u8)
Sets FX 1 Param 1, clamped to 0 to 255.
Sourcepub fn fx1_param2(&self) -> u8
pub fn fx1_param2(&self) -> u8
FX 1 Param 2.
Offset 168, 0 to 255.
Sourcepub fn set_fx1_param2(&mut self, value: u8)
pub fn set_fx1_param2(&mut self, value: u8)
Sets FX 1 Param 2, clamped to 0 to 255.
Sourcepub fn fx1_param3(&self) -> u8
pub fn fx1_param3(&self) -> u8
FX 1 Param 3.
Offset 169, 0 to 255.
Sourcepub fn set_fx1_param3(&mut self, value: u8)
pub fn set_fx1_param3(&mut self, value: u8)
Sets FX 1 Param 3, clamped to 0 to 255.
Sourcepub fn fx1_param4(&self) -> u8
pub fn fx1_param4(&self) -> u8
FX 1 Param 4.
Offset 170, 0 to 255.
Sourcepub fn set_fx1_param4(&mut self, value: u8)
pub fn set_fx1_param4(&mut self, value: u8)
Sets FX 1 Param 4, clamped to 0 to 255.
Sourcepub fn fx1_param5(&self) -> u8
pub fn fx1_param5(&self) -> u8
FX 1 Param 5.
Offset 171, 0 to 255.
Sourcepub fn set_fx1_param5(&mut self, value: u8)
pub fn set_fx1_param5(&mut self, value: u8)
Sets FX 1 Param 5, clamped to 0 to 255.
Sourcepub fn fx1_param6(&self) -> u8
pub fn fx1_param6(&self) -> u8
FX 1 Param 6.
Offset 172, 0 to 255.
Sourcepub fn set_fx1_param6(&mut self, value: u8)
pub fn set_fx1_param6(&mut self, value: u8)
Sets FX 1 Param 6, clamped to 0 to 255.
Sourcepub fn fx1_param7(&self) -> u8
pub fn fx1_param7(&self) -> u8
FX 1 Param 7.
Offset 173, 0 to 255.
Sourcepub fn set_fx1_param7(&mut self, value: u8)
pub fn set_fx1_param7(&mut self, value: u8)
Sets FX 1 Param 7, clamped to 0 to 255.
Sourcepub fn fx1_param8(&self) -> u8
pub fn fx1_param8(&self) -> u8
FX 1 Param 8.
Offset 174, 0 to 255.
Sourcepub fn set_fx1_param8(&mut self, value: u8)
pub fn set_fx1_param8(&mut self, value: u8)
Sets FX 1 Param 8, clamped to 0 to 255.
Sourcepub fn fx1_param9(&self) -> u8
pub fn fx1_param9(&self) -> u8
FX 1 Param 9.
Offset 175, 0 to 255.
Sourcepub fn set_fx1_param9(&mut self, value: u8)
pub fn set_fx1_param9(&mut self, value: u8)
Sets FX 1 Param 9, clamped to 0 to 255.
Sourcepub fn fx1_param10(&self) -> u8
pub fn fx1_param10(&self) -> u8
FX 1 Param 10.
Offset 176, 0 to 255.
Sourcepub fn set_fx1_param10(&mut self, value: u8)
pub fn set_fx1_param10(&mut self, value: u8)
Sets FX 1 Param 10, clamped to 0 to 255.
Sourcepub fn fx1_param11(&self) -> u8
pub fn fx1_param11(&self) -> u8
FX 1 Param 11.
Offset 177, 0 to 255.
Sourcepub fn set_fx1_param11(&mut self, value: u8)
pub fn set_fx1_param11(&mut self, value: u8)
Sets FX 1 Param 11, clamped to 0 to 255.
Sourcepub fn fx1_param12(&self) -> u8
pub fn fx1_param12(&self) -> u8
FX 1 Param 12.
Offset 178, 0 to 255.
Sourcepub fn set_fx1_param12(&mut self, value: u8)
pub fn set_fx1_param12(&mut self, value: u8)
Sets FX 1 Param 12, clamped to 0 to 255.
Sourcepub fn fx2_type(&self) -> Option<FxType>
pub fn fx2_type(&self) -> Option<FxType>
FX 2 Type.
Offset 179. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_fx2_type(&mut self, value: FxType)
pub fn set_fx2_type(&mut self, value: FxType)
Sets FX 2 Type.
Sourcepub fn fx2_param1(&self) -> u8
pub fn fx2_param1(&self) -> u8
FX 2 Param 1.
Offset 180, 0 to 255.
Sourcepub fn set_fx2_param1(&mut self, value: u8)
pub fn set_fx2_param1(&mut self, value: u8)
Sets FX 2 Param 1, clamped to 0 to 255.
Sourcepub fn fx2_param2(&self) -> u8
pub fn fx2_param2(&self) -> u8
FX 2 Param 2.
Offset 181, 0 to 255.
Sourcepub fn set_fx2_param2(&mut self, value: u8)
pub fn set_fx2_param2(&mut self, value: u8)
Sets FX 2 Param 2, clamped to 0 to 255.
Sourcepub fn fx2_param3(&self) -> u8
pub fn fx2_param3(&self) -> u8
FX 2 Param 3.
Offset 182, 0 to 255.
Sourcepub fn set_fx2_param3(&mut self, value: u8)
pub fn set_fx2_param3(&mut self, value: u8)
Sets FX 2 Param 3, clamped to 0 to 255.
Sourcepub fn fx2_param4(&self) -> u8
pub fn fx2_param4(&self) -> u8
FX 2 Param 4.
Offset 183, 0 to 255.
Sourcepub fn set_fx2_param4(&mut self, value: u8)
pub fn set_fx2_param4(&mut self, value: u8)
Sets FX 2 Param 4, clamped to 0 to 255.
Sourcepub fn fx2_param5(&self) -> u8
pub fn fx2_param5(&self) -> u8
FX 2 Param 5.
Offset 184, 0 to 255.
Sourcepub fn set_fx2_param5(&mut self, value: u8)
pub fn set_fx2_param5(&mut self, value: u8)
Sets FX 2 Param 5, clamped to 0 to 255.
Sourcepub fn fx2_param6(&self) -> u8
pub fn fx2_param6(&self) -> u8
FX 2 Param 6.
Offset 185, 0 to 255.
Sourcepub fn set_fx2_param6(&mut self, value: u8)
pub fn set_fx2_param6(&mut self, value: u8)
Sets FX 2 Param 6, clamped to 0 to 255.
Sourcepub fn fx2_param7(&self) -> u8
pub fn fx2_param7(&self) -> u8
FX 2 Param 7.
Offset 186, 0 to 255.
Sourcepub fn set_fx2_param7(&mut self, value: u8)
pub fn set_fx2_param7(&mut self, value: u8)
Sets FX 2 Param 7, clamped to 0 to 255.
Sourcepub fn fx2_param8(&self) -> u8
pub fn fx2_param8(&self) -> u8
FX 2 Param 8.
Offset 187, 0 to 255.
Sourcepub fn set_fx2_param8(&mut self, value: u8)
pub fn set_fx2_param8(&mut self, value: u8)
Sets FX 2 Param 8, clamped to 0 to 255.
Sourcepub fn fx2_param9(&self) -> u8
pub fn fx2_param9(&self) -> u8
FX 2 Param 9.
Offset 188, 0 to 255.
Sourcepub fn set_fx2_param9(&mut self, value: u8)
pub fn set_fx2_param9(&mut self, value: u8)
Sets FX 2 Param 9, clamped to 0 to 255.
Sourcepub fn fx2_param10(&self) -> u8
pub fn fx2_param10(&self) -> u8
FX 2 Param 10.
Offset 189, 0 to 255.
Sourcepub fn set_fx2_param10(&mut self, value: u8)
pub fn set_fx2_param10(&mut self, value: u8)
Sets FX 2 Param 10, clamped to 0 to 255.
Sourcepub fn fx2_param11(&self) -> u8
pub fn fx2_param11(&self) -> u8
FX 2 Param 11.
Offset 190, 0 to 255.
Sourcepub fn set_fx2_param11(&mut self, value: u8)
pub fn set_fx2_param11(&mut self, value: u8)
Sets FX 2 Param 11, clamped to 0 to 255.
Sourcepub fn fx2_param12(&self) -> u8
pub fn fx2_param12(&self) -> u8
FX 2 Param 12.
Offset 191, 0 to 255.
Sourcepub fn set_fx2_param12(&mut self, value: u8)
pub fn set_fx2_param12(&mut self, value: u8)
Sets FX 2 Param 12, clamped to 0 to 255.
Sourcepub fn fx3_type(&self) -> Option<FxType>
pub fn fx3_type(&self) -> Option<FxType>
FX 3 Type.
Offset 192. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_fx3_type(&mut self, value: FxType)
pub fn set_fx3_type(&mut self, value: FxType)
Sets FX 3 Type.
Sourcepub fn fx3_param1(&self) -> u8
pub fn fx3_param1(&self) -> u8
FX 3 Param 1.
Offset 193, 0 to 255.
Sourcepub fn set_fx3_param1(&mut self, value: u8)
pub fn set_fx3_param1(&mut self, value: u8)
Sets FX 3 Param 1, clamped to 0 to 255.
Sourcepub fn fx3_param2(&self) -> u8
pub fn fx3_param2(&self) -> u8
FX 3 Param 2.
Offset 194, 0 to 255.
Sourcepub fn set_fx3_param2(&mut self, value: u8)
pub fn set_fx3_param2(&mut self, value: u8)
Sets FX 3 Param 2, clamped to 0 to 255.
Sourcepub fn fx3_param3(&self) -> u8
pub fn fx3_param3(&self) -> u8
FX 3 Param 3.
Offset 195, 0 to 255.
Sourcepub fn set_fx3_param3(&mut self, value: u8)
pub fn set_fx3_param3(&mut self, value: u8)
Sets FX 3 Param 3, clamped to 0 to 255.
Sourcepub fn fx3_param4(&self) -> u8
pub fn fx3_param4(&self) -> u8
FX 3 Param 4.
Offset 196, 0 to 255.
Sourcepub fn set_fx3_param4(&mut self, value: u8)
pub fn set_fx3_param4(&mut self, value: u8)
Sets FX 3 Param 4, clamped to 0 to 255.
Sourcepub fn fx3_param5(&self) -> u8
pub fn fx3_param5(&self) -> u8
FX 3 Param 5.
Offset 197, 0 to 255.
Sourcepub fn set_fx3_param5(&mut self, value: u8)
pub fn set_fx3_param5(&mut self, value: u8)
Sets FX 3 Param 5, clamped to 0 to 255.
Sourcepub fn fx3_param6(&self) -> u8
pub fn fx3_param6(&self) -> u8
FX 3 Param 6.
Offset 198, 0 to 255.
Sourcepub fn set_fx3_param6(&mut self, value: u8)
pub fn set_fx3_param6(&mut self, value: u8)
Sets FX 3 Param 6, clamped to 0 to 255.
Sourcepub fn fx3_param7(&self) -> u8
pub fn fx3_param7(&self) -> u8
FX 3 Param 7.
Offset 199, 0 to 255.
Sourcepub fn set_fx3_param7(&mut self, value: u8)
pub fn set_fx3_param7(&mut self, value: u8)
Sets FX 3 Param 7, clamped to 0 to 255.
Sourcepub fn fx3_param8(&self) -> u8
pub fn fx3_param8(&self) -> u8
FX 3 Param 8.
Offset 200, 0 to 255.
Sourcepub fn set_fx3_param8(&mut self, value: u8)
pub fn set_fx3_param8(&mut self, value: u8)
Sets FX 3 Param 8, clamped to 0 to 255.
Sourcepub fn fx3_param9(&self) -> u8
pub fn fx3_param9(&self) -> u8
FX 3 Param 9.
Offset 201, 0 to 255.
Sourcepub fn set_fx3_param9(&mut self, value: u8)
pub fn set_fx3_param9(&mut self, value: u8)
Sets FX 3 Param 9, clamped to 0 to 255.
Sourcepub fn fx3_param10(&self) -> u8
pub fn fx3_param10(&self) -> u8
FX 3 Param 10.
Offset 202, 0 to 255.
Sourcepub fn set_fx3_param10(&mut self, value: u8)
pub fn set_fx3_param10(&mut self, value: u8)
Sets FX 3 Param 10, clamped to 0 to 255.
Sourcepub fn fx3_param11(&self) -> u8
pub fn fx3_param11(&self) -> u8
FX 3 Param 11.
Offset 203, 0 to 255.
Sourcepub fn set_fx3_param11(&mut self, value: u8)
pub fn set_fx3_param11(&mut self, value: u8)
Sets FX 3 Param 11, clamped to 0 to 255.
Sourcepub fn fx3_param12(&self) -> u8
pub fn fx3_param12(&self) -> u8
FX 3 Param 12.
Offset 204, 0 to 255.
Sourcepub fn set_fx3_param12(&mut self, value: u8)
pub fn set_fx3_param12(&mut self, value: u8)
Sets FX 3 Param 12, clamped to 0 to 255.
Sourcepub fn fx4_type(&self) -> Option<FxType>
pub fn fx4_type(&self) -> Option<FxType>
FX 4 Type.
Offset 205. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_fx4_type(&mut self, value: FxType)
pub fn set_fx4_type(&mut self, value: FxType)
Sets FX 4 Type.
Sourcepub fn fx4_param1(&self) -> u8
pub fn fx4_param1(&self) -> u8
FX 4 Param 1.
Offset 206, 0 to 255.
Sourcepub fn set_fx4_param1(&mut self, value: u8)
pub fn set_fx4_param1(&mut self, value: u8)
Sets FX 4 Param 1, clamped to 0 to 255.
Sourcepub fn fx4_param2(&self) -> u8
pub fn fx4_param2(&self) -> u8
FX 4 Param 2.
Offset 207, 0 to 255.
Sourcepub fn set_fx4_param2(&mut self, value: u8)
pub fn set_fx4_param2(&mut self, value: u8)
Sets FX 4 Param 2, clamped to 0 to 255.
Sourcepub fn fx4_param3(&self) -> u8
pub fn fx4_param3(&self) -> u8
FX 4 Param 3.
Offset 208, 0 to 255.
Sourcepub fn set_fx4_param3(&mut self, value: u8)
pub fn set_fx4_param3(&mut self, value: u8)
Sets FX 4 Param 3, clamped to 0 to 255.
Sourcepub fn fx4_param4(&self) -> u8
pub fn fx4_param4(&self) -> u8
FX 4 Param 4.
Offset 209, 0 to 255.
Sourcepub fn set_fx4_param4(&mut self, value: u8)
pub fn set_fx4_param4(&mut self, value: u8)
Sets FX 4 Param 4, clamped to 0 to 255.
Sourcepub fn fx4_param5(&self) -> u8
pub fn fx4_param5(&self) -> u8
FX 4 Param 5.
Offset 210, 0 to 255.
Sourcepub fn set_fx4_param5(&mut self, value: u8)
pub fn set_fx4_param5(&mut self, value: u8)
Sets FX 4 Param 5, clamped to 0 to 255.
Sourcepub fn fx4_param6(&self) -> u8
pub fn fx4_param6(&self) -> u8
FX 4 Param 6.
Offset 211, 0 to 255.
Sourcepub fn set_fx4_param6(&mut self, value: u8)
pub fn set_fx4_param6(&mut self, value: u8)
Sets FX 4 Param 6, clamped to 0 to 255.
Sourcepub fn fx4_param7(&self) -> u8
pub fn fx4_param7(&self) -> u8
FX 4 Param 7.
Offset 212, 0 to 255.
Sourcepub fn set_fx4_param7(&mut self, value: u8)
pub fn set_fx4_param7(&mut self, value: u8)
Sets FX 4 Param 7, clamped to 0 to 255.
Sourcepub fn fx4_param8(&self) -> u8
pub fn fx4_param8(&self) -> u8
FX 4 Param 8.
Offset 213, 0 to 255.
Sourcepub fn set_fx4_param8(&mut self, value: u8)
pub fn set_fx4_param8(&mut self, value: u8)
Sets FX 4 Param 8, clamped to 0 to 255.
Sourcepub fn fx4_param9(&self) -> u8
pub fn fx4_param9(&self) -> u8
FX 4 Param 9.
Offset 214, 0 to 255.
Sourcepub fn set_fx4_param9(&mut self, value: u8)
pub fn set_fx4_param9(&mut self, value: u8)
Sets FX 4 Param 9, clamped to 0 to 255.
Sourcepub fn fx4_param10(&self) -> u8
pub fn fx4_param10(&self) -> u8
FX 4 Param 10.
Offset 215, 0 to 255.
Sourcepub fn set_fx4_param10(&mut self, value: u8)
pub fn set_fx4_param10(&mut self, value: u8)
Sets FX 4 Param 10, clamped to 0 to 255.
Sourcepub fn fx4_param11(&self) -> u8
pub fn fx4_param11(&self) -> u8
FX 4 Param 11.
Offset 216, 0 to 255.
Sourcepub fn set_fx4_param11(&mut self, value: u8)
pub fn set_fx4_param11(&mut self, value: u8)
Sets FX 4 Param 11, clamped to 0 to 255.
Sourcepub fn fx4_param12(&self) -> u8
pub fn fx4_param12(&self) -> u8
FX 4 Param 12.
Offset 217, 0 to 255.
Sourcepub fn set_fx4_param12(&mut self, value: u8)
pub fn set_fx4_param12(&mut self, value: u8)
Sets FX 4 Param 12, clamped to 0 to 255.
Sourcepub fn fx1_output_gain(&self) -> u8
pub fn fx1_output_gain(&self) -> u8
FX 1 Output Gain.
Offset 218, 0 to 150.
Sourcepub fn set_fx1_output_gain(&mut self, value: u8)
pub fn set_fx1_output_gain(&mut self, value: u8)
Sets FX 1 Output Gain, clamped to 0 to 150.
Sourcepub fn fx2_output_gain(&self) -> u8
pub fn fx2_output_gain(&self) -> u8
FX 2 Output Gain.
Offset 219, 0 to 150.
Sourcepub fn set_fx2_output_gain(&mut self, value: u8)
pub fn set_fx2_output_gain(&mut self, value: u8)
Sets FX 2 Output Gain, clamped to 0 to 150.
Sourcepub fn fx3_output_gain(&self) -> u8
pub fn fx3_output_gain(&self) -> u8
FX 3 Output Gain.
Offset 220, 0 to 150.
Sourcepub fn set_fx3_output_gain(&mut self, value: u8)
pub fn set_fx3_output_gain(&mut self, value: u8)
Sets FX 3 Output Gain, clamped to 0 to 150.
Sourcepub fn fx4_output_gain(&self) -> u8
pub fn fx4_output_gain(&self) -> u8
FX 4 Output Gain.
Offset 221, 0 to 150.
Sourcepub fn set_fx4_output_gain(&mut self, value: u8)
pub fn set_fx4_output_gain(&mut self, value: u8)
Sets FX 4 Output Gain, clamped to 0 to 150.
Sourcepub fn fx_mode(&self) -> Option<FxMode>
pub fn fx_mode(&self) -> Option<FxMode>
FX Mode.
Offset 222. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_fx_mode(&mut self, value: FxMode)
pub fn set_fx_mode(&mut self, value: FxMode)
Sets FX Mode.
Sourcepub fn program_category(&self) -> Option<ProgramCategory>
pub fn program_category(&self) -> Option<ProgramCategory>
Program Category.
Offset 240. None when the byte is one the table does not list,
which is also what a program written by an older firmware reads as where
that firmware numbered this table differently.
Sourcepub fn set_program_category(&mut self, value: ProgramCategory)
pub fn set_program_category(&mut self, value: ProgramCategory)
Sets Program Category.
Sourcepub fn program_transpose(&self) -> u8
pub fn program_transpose(&self) -> u8
Program Transpose.
Offset 241, 80 to 176.
Sourcepub fn set_program_transpose(&mut self, value: u8)
pub fn set_program_transpose(&mut self, value: u8)
Sets Program Transpose, clamped to 80 to 176.
Source§impl Program
impl Program
Sourcepub const MAX_LEN: usize
pub const MAX_LEN: usize
Bytes the longest documented program carries.
A comms protocol version 7 program; a version 6 program is three bytes shorter and those three bytes are the reserved ones.
Sourcepub const PACKED_MAX_LEN: usize
pub const PACKED_MAX_LEN: usize
Bytes Program::pack_into needs at most.
Sourcepub fn new(version: ProtocolVersion) -> Self
pub fn new(version: ProtocolVersion) -> Self
Builds a program with every parameter at the lowest value it accepts.
Not the initialised program the synthesizer’s INIT button loads, which is a factory sound this specification does not record. It is a program that every parameter accepts, which is what building one from nothing needs.
Sourcepub fn from_bytes(version: ProtocolVersion, bytes: &[u8]) -> Result<Self>
pub fn from_bytes(version: ProtocolVersion, bytes: &[u8]) -> Result<Self>
Reads a program from the bytes of an unpacked dump.
Nothing is checked beyond the length. A value outside what its parameter
accepts is kept and reported by Program::invalid, since the
synthesizer is the authority on what it holds.
§Errors
Returns Error::ProgramLength when bytes is not as long as that
version’s program.
Sourcepub fn from_packed(version: ProtocolVersion, packed: &[u8]) -> Result<Self>
pub fn from_packed(version: ProtocolVersion, packed: &[u8]) -> Result<Self>
Reads a program from the packed payload of a dump.
A packed run is padded to a multiple of eight bytes, so it can carry up
to six bytes more than the program needs; the version says how much of
it is the program and the rest is dropped. That is the same rule
Frame::parse applies to a program dump,
so a frame that parses is a program that decodes.
§Errors
Returns Error::PackedRunLength for a run that cannot be unpacked and
Error::ProgramLength for one that unpacks to fewer bytes than this
version’s program, or to a whole group more.
Sourcepub fn from_dump(message: &Message<'_>) -> Result<Self>
pub fn from_dump(message: &Message<'_>) -> Result<Self>
Reads a program from the message that carried it.
Both dumps that carry a program are accepted: one stored in a bank, and the edit buffer.
§Errors
Returns Error::NotAProgramDump for any other message, and whatever
Program::from_packed returns for the payload.
Sourcepub const fn version(&self) -> ProtocolVersion
pub const fn version(&self) -> ProtocolVersion
Returns the comms protocol version this program is stored in.
Sourcepub fn reserved(&self) -> &[u8] ⓘ
pub fn reserved(&self) -> &[u8] ⓘ
Returns the bytes past the last parameter.
Empty under comms protocol version 6. Version 7 adds three reserved bytes, which are zero in every factory program examined and are carried through rather than decoded.
Sourcepub fn packed_len(&self) -> usize
pub fn packed_len(&self) -> usize
Returns the number of bytes Program::pack_into writes.
Sourcepub fn pack_into(&self, out: &mut [u8]) -> Result<usize>
pub fn pack_into(&self, out: &mut [u8]) -> Result<usize>
Packs the program into out, ready for a dump message to borrow.
§Errors
Returns Error::BufferTooSmall when out is shorter than
Program::packed_len.
Sourcepub fn algorithm(&self, engine: Engine) -> Option<&'static Algorithm>
pub fn algorithm(&self, engine: Engine) -> Option<&'static Algorithm>
Returns the algorithm an effect engine is running, on
DEFAULT_FIRMWARE.
The join between the twelve raw bytes the engine holds and what they
mean: Algorithm::slots says what each of them is, and
Engine::slot_parameter which byte to read.
None when the stored byte names no algorithm, which a program written
on a firmware this one does not describe can do.
use deepmind_midi::effect::Engine;
use deepmind_midi::ids::ProtocolVersion;
use deepmind_midi::param::ParamId;
use deepmind_midi::program::Program;
let mut program = Program::new(ProtocolVersion::V7);
program.set(ParamId::Fx1Type, 2)?; // a Room Reverb
let room = program.algorithm(Engine::One).expect("byte 2 names one");
assert_eq!(room.full_name, "Room Reverb");
assert_eq!(room.slot(3).map(|slot| slot.title), Some("Size"));Sourcepub fn algorithm_for(
&self,
engine: Engine,
firmware: Version,
) -> Option<&'static Algorithm>
pub fn algorithm_for( &self, engine: Engine, firmware: Version, ) -> Option<&'static Algorithm>
Returns the algorithm an effect engine is running, on the firmware a device inquiry reported.
Use this wherever ParamId::label_for applies: firmware 1.1 inserted an
algorithm rather than appending one, so byte 33 is Rotary Speaker on 1.0
and Vintage Pitch on 1.1, and every slot of the panel follows from which
of the two it is.
Sourcepub fn set(&mut self, parameter: ParamId, value: u8) -> Result<()>
pub fn set(&mut self, parameter: ParamId, value: u8) -> Result<()>
Sets one parameter, refusing a value it does not accept.
§Errors
Returns Error::ValueOutOfRange when the parameter does not accept the
value. Program::set_clamped is there for callers that would rather
bend the value than refuse it.
Sourcepub fn set_clamped(&mut self, parameter: ParamId, value: u8) -> u8
pub fn set_clamped(&mut self, parameter: ParamId, value: u8) -> u8
Sets one parameter, bringing the value inside its range first.
Returns what was stored. This is what the generated accessors use, since
a u8 reaches values a parameter does not.
Sourcepub fn values(&self) -> impl Iterator<Item = (ParamId, u8)> + '_
pub fn values(&self) -> impl Iterator<Item = (ParamId, u8)> + '_
Returns every parameter and the value it holds, in offset order.
Sourcepub fn changes<'a>(
&'a self,
target: &'a Self,
) -> impl Iterator<Item = (ParamId, u8)> + 'a
pub fn changes<'a>( &'a self, target: &'a Self, ) -> impl Iterator<Item = (ParamId, u8)> + 'a
Returns the parameters whose values differ, and what target holds.
The list of edits that turn this program into target.
ParamId::edit turns one into the NRPN message that sends it.
use deepmind_midi::ids::ProtocolVersion;
use deepmind_midi::param::ParamId;
use deepmind_midi::program::Program;
let before = Program::new(ProtocolVersion::V6);
let mut after = before.clone();
after.set_lfo1_rate(64);
let changed: Vec<_> = before.changes(&after).collect();
assert_eq!(changed, [(ParamId::Lfo1Rate, 64)]);Sourcepub fn invalid(&self) -> impl Iterator<Item = (ParamId, u8)> + '_
pub fn invalid(&self) -> impl Iterator<Item = (ParamId, u8)> + '_
Returns the parameters holding a value they do not accept.
Empty for anything the synthesizer sent, on the evidence so far. A dump read from a file is another matter.
Sourcepub fn validate(&self) -> Result<()>
pub fn validate(&self) -> Result<()>
Returns whether every parameter holds a value it accepts.
§Errors
Returns Error::ValueOutOfRange for the first parameter that does not,
in offset order. Program::invalid lists them all.
Sourcepub fn name(&self) -> ProgramName
pub fn name(&self) -> ProgramName
Returns the program’s name.
Sourcepub fn set_name(&mut self, name: ProgramName)
pub fn set_name(&mut self, name: ProgramName)
Sets the program’s name.
ProgramName::new is where a string becomes one of these, and where a
string that cannot be a program name is refused.
Sourcepub fn transpose(&self) -> i8
pub fn transpose(&self) -> i8
Returns the program’s transposition in semitones, -48 to 48.
The one parameter that does not start at zero: the manual gives it as 80
to 176 for -48 to +48, so the value it carries is its distance from the
middle of that range. A byte outside 80 to 176, which
invalid reports, is clamped to the nearer end.
Sourcepub fn set_transpose(&mut self, semitones: i8) -> Result<()>
pub fn set_transpose(&mut self, semitones: i8) -> Result<()>
Sets the program’s transposition in semitones.
§Errors
Returns Error::ValueOutOfRange outside -48 to 48.
Trait Implementations§
Source§impl<'de> Deserialize<'de> for Program
Available on crate feature serde only.
impl<'de> Deserialize<'de> for Program
serde only.