Struct Int1536 

pub struct Int1536(/* private fields */);

Hand-rolled fixed-width two’s-complement signed integer.

Implementations

impl Int1536

pub const fn from_str_radix(s: &str, radix: u32) -> Result<Int1536, ()>

Parse a signed decimal magnitude from s. Mirrors i128::from_str_radix in shape: accepts an optional leading -, then ASCII digits. Currently only radix == 10 is supported; any other value returns Err(()). const fn so the consts module can parse the build- time generated string literals.

pub const fn pow(self, exp: u32) -> Int1536

Integer power: self^exp via right-to-left binary exponentiation. Wraps on overflow (same semantics as i128::wrapping_pow). const fn; runs at compile time when both inputs are const.

pub const fn to_i128_checked(self) -> Option<i128>

Exact i128 value, or None if it does not fit.

pub const fn to_u128_checked(self) -> Option<u128>

Exact u128 value, or None if negative / too large.

pub const fn from_i128(v: i128) -> Int1536

Builds from a signed 128-bit value.

pub const fn from_limbs_le(limbs: [u64; 24]) -> Int1536

Builds directly from the u64 limb array ([u64; $L]). Limbs are interpreted as a little-endian two’s-complement signed integer. Wire- format compatible with the historic [u128; N] shape on little-endian targets — same byte sequence.

pub const fn limbs_le(self) -> [u64; 24]

Read-only access to the underlying u64 limbs. Symmetric with Self::from_limbs_le.

pub const fn from_u128(v: u128) -> Int1536

Builds from an unsigned 128-bit value.

Trait Implementations

impl Add for Int1536

type Output = Int1536

The resulting type after applying the + operator.

fn add(self, rhs: Int1536) -> Int1536

Performs the + operation.

impl Binary for Int1536

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for Int1536

type Output = Int1536

The resulting type after applying the & operator.

fn bitand(self, rhs: Int1536) -> Int1536

Performs the & operation.

impl BitOr for Int1536

type Output = Int1536

The resulting type after applying the | operator.

fn bitor(self, rhs: Int1536) -> Int1536

Performs the | operation.

impl BitXor for Int1536

type Output = Int1536

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: Int1536) -> Int1536

Performs the ^ operation.

impl Clone for Int1536

fn clone(&self) -> Int1536

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Int1536

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Int1536

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Decimal string of the signed value with a leading - for negatives. Needed by the serde wire-format path for wide-tier decimals, and useful in its own right for printing raw storage values.

impl Div for Int1536

type Output = Int1536

The resulting type after applying the / operator.

fn div(self, rhs: Int1536) -> Int1536

Performs the / operation.

impl From<f32> for Int1536

fn from(v: f32) -> Int1536

Converts to this type from the input type.

impl From<f64> for Int1536

fn from(v: f64) -> Int1536

Converts to this type from the input type.

impl From<i128> for Int1536

fn from(v: i128) -> Int1536

Converts to this type from the input type.

impl From<i16> for Int1536

fn from(v: i16) -> Int1536

Converts to this type from the input type.

impl From<i32> for Int1536

fn from(v: i32) -> Int1536

Converts to this type from the input type.

impl From<i64> for Int1536

fn from(v: i64) -> Int1536

Converts to this type from the input type.

impl From<i8> for Int1536

fn from(v: i8) -> Int1536

Converts to this type from the input type.

impl From<u128> for Int1536

fn from(v: u128) -> Int1536

Converts to this type from the input type.

impl From<u16> for Int1536

fn from(v: u16) -> Int1536

Converts to this type from the input type.

impl From<u32> for Int1536

fn from(v: u32) -> Int1536

Converts to this type from the input type.

impl From<u64> for Int1536

fn from(v: u64) -> Int1536

Converts to this type from the input type.

impl From<u8> for Int1536

fn from(v: u8) -> Int1536

Converts to this type from the input type.

impl Hash for Int1536

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for Int1536

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Mul for Int1536

type Output = Int1536

The resulting type after applying the * operator.

fn mul(self, rhs: Int1536) -> Int1536

Performs the * operation.

impl Neg for Int1536

type Output = Int1536

The resulting type after applying the - operator.

fn neg(self) -> Int1536

Performs the unary - operation.

impl Not for Int1536

type Output = Int1536

The resulting type after applying the ! operator.

fn not(self) -> Int1536

Performs the unary ! operation.

impl Octal for Int1536

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for Int1536

fn cmp(&self, other: &Int1536) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for Int1536

fn eq(&self, other: &Int1536) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Int1536

fn partial_cmp(&self, other: &Int1536) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Rem for Int1536

type Output = Int1536

The resulting type after applying the % operator.

fn rem(self, rhs: Int1536) -> Int1536

Performs the % operation.

impl Shl<u32> for Int1536

type Output = Int1536

The resulting type after applying the << operator.

fn shl(self, n: u32) -> Int1536

Performs the << operation.

impl Shr<u32> for Int1536

fn shr(self, n: u32) -> Int1536

Arithmetic right shift (sign-preserving).

type Output = Int1536

The resulting type after applying the >> operator.

impl Sub for Int1536

type Output = Int1536

The resulting type after applying the - operator.

fn sub(self, rhs: Int1536) -> Int1536

Performs the - operation.

impl UpperHex for Int1536

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl WidthLE<Int1536> for Int1024

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for Int1536

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for Int192

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for Int256

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for Int384

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for Int512

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for Int768

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for i128

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for i32

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int1536> for i64

fn widen_into(self) -> Int1536

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int2048> for Int1536

fn widen_into(self) -> Int2048

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int3072> for Int1536

fn widen_into(self) -> Int3072

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl WidthLE<Int4096> for Int1536

fn widen_into(self) -> Int4096

Widens self to the Target storage type. Lossless by construction — Target’s range strictly covers Self’s.

impl Copy for Int1536

impl Eq for Int1536

impl StructuralPartialEq for Int1536