Enum lib::session::ResponseMode

source · 
pub enum ResponseMode {
    No,
    All,
    Any,
    NoRepeat,
    OnError,
    Preferred,
}
Expand description

The Response Modes define the condition for termination on success of a Request

Variants§

§

No

A Request is acknowledged if the DLL CSMA-CA routine succeeds. No responses are expected.

Eg. The request is successful if your packet was successfully sent on the radio.

§

All

If the addressee is broadcast, a Request is acknowledged if as many as possible D7ATP responses to this Request are received (may be zero).

If the addressee is unicast, a Request is acknowledged if the addressee provides a D7ATP response. All responses received during the D7ATP Receive Period are vectored to upper layer.

Eg. Succeeds if everyone addressed responds to the radio packet.

§

Any

A Request is acknowledged if at least one D7ATP response to this Request is received.

Eg. Succeeds if you receive one response to the radio packet.

§

NoRepeat

A Request is acknowledged if the DLL CSMA-CA routine succeeds REPEAT times. No responses are expected. The parameters REPEAT is defined in the SEL configuration file.

§

OnError

A Request is acknowledged if the DLL CSMA-CA routine succeeds. It is un- acknowledged when a response does not acknowledge the Request. The procedure behaves as RESP_ALL, but Responders provide responses only when their D7ATP ACK Templates is not void or if the upper layer provides a response.

Eg. Succeeds only if the responder gives back an ALP packet in response (which is more restrictive than succeeding upon successful radio ACK).

§

Preferred

A Request is acknowledged if at least one D7ATP response to this Request is received. The procedure behaves as RESP_ANY, but the Addressee is managed dynamically. It is set to broadcast after failure to receive an acknowledgement. On acknowledgement success, it is set to the Addressee of one of the responders that acknowledged the Request (preferred addressee). The preferred addressee selection is implementation dependent.

Trait Implementations§

source§

impl Clone for ResponseMode

source§

fn clone(&self) -> ResponseMode

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ResponseMode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for ResponseMode

source§

fn default() -> ResponseMode

Returns the “default value” for a type. Read more
source§

impl DekuContainerRead<'_> for ResponseMode

source§

fn from_bytes( __deku_input: (&[u8], usize) ) -> Result<((&[u8], usize), Self), DekuError>

Read bytes and construct type Read more
source§

impl DekuContainerWrite for ResponseMode

source§

fn to_bytes(&self) -> Result<Vec<u8>, DekuError>

Write struct/enum to Vec
source§

fn to_bits(&self) -> Result<BitVec<u8, Msb0>, DekuError>

Write struct/enum to BitVec
source§

impl DekuEnumExt<'_, u8> for ResponseMode

source§

fn deku_id(&self) -> Result<u8, DekuError>

Obtain id of a given enum variant
source§

impl DekuRead<'_> for ResponseMode

source§

fn read( __deku_input_bits: &BitSlice<u8, Msb0>, _: () ) -> Result<(&BitSlice<u8, Msb0>, Self), DekuError>

Read bits and construct type Read more
source§

impl DekuUpdate for ResponseMode

source§

fn update(&mut self) -> Result<(), DekuError>

Apply updates
source§

impl DekuWrite for ResponseMode

source§

fn write( &self, __deku_output: &mut BitVec<u8, Msb0>, _: () ) -> Result<(), DekuError>

Write type to bits Read more
source§

impl PartialEq for ResponseMode

source§

fn eq(&self, other: &ResponseMode) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl TryFrom<&[u8]> for ResponseMode

§

type Error = DekuError

The type returned in the event of a conversion error.
source§

fn try_from(input: &[u8]) -> Result<Self, Self::Error>

Performs the conversion.
source§

impl TryFrom<ResponseMode> for BitVec<u8, Msb0>

§

type Error = DekuError

The type returned in the event of a conversion error.
source§

fn try_from(input: ResponseMode) -> Result<Self, Self::Error>

Performs the conversion.
source§

impl TryFrom<ResponseMode> for Vec<u8>

§

type Error = DekuError

The type returned in the event of a conversion error.
source§

fn try_from(input: ResponseMode) -> Result<Self, Self::Error>

Performs the conversion.
source§

impl StructuralPartialEq for ResponseMode

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.