pub struct ZigbeeSlr2c {Show 15 fields
pub linkquality: f64,
pub local_temperature_heat: f64,
pub local_temperature_water: f64,
pub occupied_heating_setpoint_heat: f64,
pub occupied_heating_setpoint_water: f64,
pub running_state_heat: ZigbeeSlr2cRunningstateheat,
pub running_state_water: ZigbeeSlr2cRunningstatewater,
pub system_mode_heat: ZigbeeSlr2cSystemmodeheat,
pub system_mode_water: ZigbeeSlr2cSystemmodewater,
pub temperature_setpoint_hold_duration_heat: f64,
pub temperature_setpoint_hold_duration_water: f64,
pub temperature_setpoint_hold_heat: bool,
pub temperature_setpoint_hold_water: bool,
pub last_seen: Option<LastSeen>,
pub elapsed: Option<u64>,
}
Expand description
hive:SLR2c zigbee2mqtt link
Fields§
§linkquality: f64
Link quality (signal strength)
local_temperature_heat: f64
Current temperature measured on the device
local_temperature_water: f64
Current temperature measured on the device
occupied_heating_setpoint_heat: f64
Temperature setpoint
occupied_heating_setpoint_water: f64
Temperature setpoint
running_state_heat: ZigbeeSlr2cRunningstateheat
The current running state
running_state_water: ZigbeeSlr2cRunningstatewater
The current running state
system_mode_heat: ZigbeeSlr2cSystemmodeheat
Mode of this device
system_mode_water: ZigbeeSlr2cSystemmodewater
Mode of this device
temperature_setpoint_hold_duration_heat: f64
Period in minutes for which the setpoint hold will be active. 65535 = attribute not used. 0 to 360 to match the remote display
temperature_setpoint_hold_duration_water: f64
Period in minutes for which the setpoint hold will be active. 65535 = attribute not used. 0 to 360 to match the remote display
temperature_setpoint_hold_heat: bool
Zigbee herdsman description: “Prevent changes. false
= run normally. true
= prevent from making changes. Must be set to false
when system_mode = off or true
for heat”
Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
temperature_setpoint_hold_water: bool
Zigbee herdsman description: “Prevent changes. false
= run normally. true
= prevent from making changes. Must be set to false
when system_mode = off or true
for heat”
Boolean values can be an unintuitive way round: value_on = true and value_off = false, consider double checking Zigbee2MQTT to understand what they mean
last_seen: Option<LastSeen>
Optional last_seen type, set as a global zigbee2mqtt setting
elapsed: Option<u64>
Optional elapsed type