# Zebra Utilities
Tools for maintaining and testing Zebra:
- [zebra-checkpoints](#zebra-checkpoints)
- [zebrad-hash-lookup](#zebrad-hash-lookup)
- [zebrad-log-filter](#zebrad-log-filter)
- [zcash-rpc-diff](#zcash-rpc-diff)
- [scanning-results-reader](#scanning-results-reader)
Binaries are easier to use if they are located in your system execution path.
## zebra-checkpoints
This command generates a list of zebra checkpoints, and writes them to standard output. Each checkpoint consists of a block height and hash.
#### Automatic Checkpoint Generation in CI
Zebra's GitHub workflows automatically generate checkpoints after every `main` branch update.
These checkpoints can be copied into the `main-checkpoints.txt` and `test-checkpoints.txt` files.
To find the latest checkpoints on the `main` branch:
1. Find the [latest completed integration tests workflow run on `main`](https://github.com/ZcashFoundation/zebra/actions/workflows/zfnd-ci-integration-tests-gcp.yml?query=branch%3Amain).
Due to GitHub UI issues, some runs will show as waiting, cancelled, or failed,
but the checkpoints have still been generated.
2. From the list on the left, find the `Generate checkpoints mainnet` job, then click the
`Result of generate-checkpoints-mainnet` step.
3. Scroll down until you see the list of checkpoints.
4. Add those checkpoints to the end of `zebra-chain/src/parameters/checkpoint/main-checkpoints.txt`
5. Repeat steps 2 to 4 for the `Generate checkpoints testnet` job
6. Open a pull request at <https://github.com/ZcashFoundation/zebra/pulls>
#### Manual Checkpoint Generation
To create checkpoints, you need a synchronized instance of `zebrad` or `zcashd`.
`zebrad` can be queried directly or via an installed `zcash-cli` RPC client.
`zcashd` must be queried via `zcash-cli`, which performs the correct RPC authentication.
#### Checkpoint Generation Setup
Make sure your `zebrad` or `zcashd` is [listening for RPC requests](https://docs.rs/zebra-rpc/latest/zebra_rpc/config/rpc/struct.Config.html#structfield.listen_addr),
and synced to the network tip.
If you are on a Debian system, `zcash-cli` [can be installed as a package](https://zcash.readthedocs.io/en/master/rtd_pages/install_debian_bin_packages.html).
`zebra-checkpoints` is a standalone rust binary, you can compile it using:
```sh
cargo install --locked --features zebra-checkpoints --git https://github.com/ZcashFoundation/zebra zebra-utils
```
#### Checkpoint Generation Commands
You can update the checkpoints using these commands:
```sh
wait
```
When updating the lists there is no need to start from the genesis block. The program option
`--last-checkpoint` will let you specify at what block height you want to start. Usually, the
maintainers will copy the last height from each list, and start from there.
Other useful options are:
- `--transport direct`: connect directly to a `zebrad` instance
- `--addr`: supply a custom RPC address and port for the node
- `-- -testnet`: connect the `zcash-cli` binary to a testnet node instance
You can see all the `zebra-checkpoints` options using:
```sh
target/release/zebra-checkpoints --help
```
For more details about checkpoint lists, see the [`zebra-checkpoints` README.](https://github.com/ZcashFoundation/zebra/tree/main/zebra-chain/src/parameters/checkpoint/README.md)
#### Checkpoint Generation for Testnet
To update the testnet checkpoints, `zebra-checkpoints` needs to connect to a testnet node.
To launch a testnet node, you can either:
- start `zebrad` [with a `zebrad.toml` with `network.network` set to `Testnet`](https://docs.rs/zebra-network/latest/zebra_network/config/struct.Config.html#structfield.network), or
- run `zcashd -testnet`.
Then use the commands above to regenerate the checkpoints.
#### Submit new checkpoints as pull request
- If you started from the last checkpoint in the current list, add the checkpoint list to the end
of the existing checkpoint file. If you started from genesis, replace the entire file.
- Open a pull request with the updated Mainnet and Testnet lists at:
<https://github.com/ZcashFoundation/zebra/pulls>
## zebrad-hash-lookup
Given a block hash the script will get additional information using `zcash-cli`.
```sh
time: 2016-11-02T13:24:26Z
hash: 00000001f53a5e284393dfecf2a2405f62c07e2503047a28e2d1b6e76b25f863
prev: 00000001dbbb8b26eb92003086c5bd854e16d9f16e2e5b4fcc007b6b0ae57be3
next: 00000001ff3ac2b4ccb57d9fd2d1187475156489ae22337ca866bbafe62991a2
$
```
This program is commonly used as part of `zebrad-log-filter` where hashes will be captured from `zebrad` output.
## zebrad-log-filter
The program is designed to filter the output from the zebra terminal or log file. Each time a hash is seen the script will capture it and get the additional information using `zebrad-hash-lookup`.
Assuming `zebrad`, `zcash-cli`, `zebrad-hash-lookup` and `zebrad-log-filter` are in your path the program can used as:
```sh
block::Hash("
high: 2800
time: 2016-11-01T16:17:16Z
hash: 00000001ecd754790237618cb79c4cd302e52571ecda7a80e6113c5e423c0e55
prev: 00000003ed8623d9499f4bf80f8bc410066194bf6813762b31560f9319205bf8
next: 00000001436277884eef900772f0fcec9566becccebaab4713fd665b60fab309
"))) max_checkpoint_height=Height(419581)
...
```
## zcash-rpc-diff
This program compares `zebrad` and `zcashd` RPC responses.
Make sure you have zcashd and zebrad installed and synced.
The script:
1. gets the `zebrad` and `zcashd` tip height and network
2. sends the RPC request to both of them using `zcash-cli`
3. compares the responses using `diff`
4. leaves the full responses in files in a temporary directory, so you can check them in detail
5. if possible, compares different RPC methods for consistency
Assuming `zebrad`'s RPC port is 28232, you should be able to run:
```sh
$ zebra-utils/zcash-rpc-diff 28232 getinfo
Checking zebrad network and tip height...
Checking zcashd network and tip height...
Request:
getinfo
Querying zebrad main chain at height 1649797...
Querying zcashd main chain at height 1649797...
Response diff (between zcashd port and port 28232):
--- /run/user/1000/tmp.g9CJecu2Wo/zebrad-main-1649797-getinfo.json 2022-04-29 14:08:46.766240355 +1000
+++ /run/user/1000/tmp.g9CJecu2Wo/zcashd-main-1649797-getinfo.json 2022-04-29 14:08:46.769240315 +1000
@@ -1,4 +1,16 @@
{
- "build": "1.0.0-beta.8+54.ge83e93a",
- "subversion": "/Zebra:1.0.0-beta.8/"
+ "version": 4070050,
+ "build": "v4.7.0-gitian",
+ "subversion": "/MagicBean:4.7.0/",
... more extra zcashd fields ...
}
```
Sometimes zcashd will have extra fields (`+`) or different data (`-` and `+`).
And sometimes it will have the same data, but in a different order.
The script will warn you if the heights or networks are different,
then display the results of querying the mismatched node states.
The script accepts any RPC, with any number of arguments.
If a node doesn't implement an RPC, the script will exit with an error.
#### Configuration
The script uses the configured `zcash-cli` RPC port,
and the `zebrad` port supplied on the command-line.
It doesn't actually check what kind of node it is talking to,
so you can compare two `zcashd` or `zebrad` nodes if you want.
(Just edit the `zcash.conf` file used by `zcash-cli`, or edit the script.)
You can override the binaries the script calls using these environmental variables:
- `$ZCASH_CLI`
- `$DIFF`
- `$JQ`