#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
ins: INS,
cmc: CMC,
tcst: TCST,
tcset: TCSET,
tcclr: TCCLR,
tc: TC,
psl: PSL,
dit: DIT,
dits: DITS,
psc: PSC,
fpc: FPC,
fpcs: FPCS,
pr: PR,
prs: PRS,
cr1: CR1,
cr1s: CR1S,
cr2: CR2,
cr2s: CR2S,
chc: CHC,
dtc: DTC,
dc1r: DC1R,
dc2r: DC2R,
_reserved22: [u8; 0x18],
timer: TIMER,
c0v: C0V,
c1v: C1V,
c2v: C2V,
c3v: C3V,
_reserved27: [u8; 0x1c],
ints: INTS,
inte: INTE,
srs: SRS,
sws: SWS,
swr: SWR,
stc: STC,
ecrd0: ECRD0,
ecrd1: ECRD1,
}
impl RegisterBlock {
#[doc = "0x00 - Input Selector Configuration"]
#[inline(always)]
pub const fn ins(&self) -> &INS {
&self.ins
}
#[doc = "0x04 - Connection Matrix Control"]
#[inline(always)]
pub const fn cmc(&self) -> &CMC {
&self.cmc
}
#[doc = "0x08 - Slice Timer Status"]
#[inline(always)]
pub const fn tcst(&self) -> &TCST {
&self.tcst
}
#[doc = "0x0c - Slice Timer Run Set"]
#[inline(always)]
pub const fn tcset(&self) -> &TCSET {
&self.tcset
}
#[doc = "0x10 - Slice Timer Clear"]
#[inline(always)]
pub const fn tcclr(&self) -> &TCCLR {
&self.tcclr
}
#[doc = "0x14 - Slice Timer Control"]
#[inline(always)]
pub const fn tc(&self) -> &TC {
&self.tc
}
#[doc = "0x18 - Passive Level Config"]
#[inline(always)]
pub const fn psl(&self) -> &PSL {
&self.psl
}
#[doc = "0x1c - Dither Config"]
#[inline(always)]
pub const fn dit(&self) -> &DIT {
&self.dit
}
#[doc = "0x20 - Dither Shadow Register"]
#[inline(always)]
pub const fn dits(&self) -> &DITS {
&self.dits
}
#[doc = "0x24 - Prescaler Control"]
#[inline(always)]
pub const fn psc(&self) -> &PSC {
&self.psc
}
#[doc = "0x28 - Floating Prescaler Control"]
#[inline(always)]
pub const fn fpc(&self) -> &FPC {
&self.fpc
}
#[doc = "0x2c - Floating Prescaler Shadow"]
#[inline(always)]
pub const fn fpcs(&self) -> &FPCS {
&self.fpcs
}
#[doc = "0x30 - Timer Period Value"]
#[inline(always)]
pub const fn pr(&self) -> &PR {
&self.pr
}
#[doc = "0x34 - Timer Shadow Period Value"]
#[inline(always)]
pub const fn prs(&self) -> &PRS {
&self.prs
}
#[doc = "0x38 - Channel 1 Compare Value"]
#[inline(always)]
pub const fn cr1(&self) -> &CR1 {
&self.cr1
}
#[doc = "0x3c - Channel 1 Compare Shadow Value"]
#[inline(always)]
pub const fn cr1s(&self) -> &CR1S {
&self.cr1s
}
#[doc = "0x40 - Channel 2 Compare Value"]
#[inline(always)]
pub const fn cr2(&self) -> &CR2 {
&self.cr2
}
#[doc = "0x44 - Channel 2 Compare Shadow Value"]
#[inline(always)]
pub const fn cr2s(&self) -> &CR2S {
&self.cr2s
}
#[doc = "0x48 - Channel Control"]
#[inline(always)]
pub const fn chc(&self) -> &CHC {
&self.chc
}
#[doc = "0x4c - Dead Time Control"]
#[inline(always)]
pub const fn dtc(&self) -> &DTC {
&self.dtc
}
#[doc = "0x50 - Channel 1 Dead Time Values"]
#[inline(always)]
pub const fn dc1r(&self) -> &DC1R {
&self.dc1r
}
#[doc = "0x54 - Channel 2 Dead Time Values"]
#[inline(always)]
pub const fn dc2r(&self) -> &DC2R {
&self.dc2r
}
#[doc = "0x70 - Timer Value"]
#[inline(always)]
pub const fn timer(&self) -> &TIMER {
&self.timer
}
#[doc = "0x74 - Capture Register 0"]
#[inline(always)]
pub const fn c0v(&self) -> &C0V {
&self.c0v
}
#[doc = "0x78 - Capture Register 1"]
#[inline(always)]
pub const fn c1v(&self) -> &C1V {
&self.c1v
}
#[doc = "0x7c - Capture Register 2"]
#[inline(always)]
pub const fn c2v(&self) -> &C2V {
&self.c2v
}
#[doc = "0x80 - Capture Register 3"]
#[inline(always)]
pub const fn c3v(&self) -> &C3V {
&self.c3v
}
#[doc = "0xa0 - Interrupt Status"]
#[inline(always)]
pub const fn ints(&self) -> &INTS {
&self.ints
}
#[doc = "0xa4 - Interrupt Enable Control"]
#[inline(always)]
pub const fn inte(&self) -> &INTE {
&self.inte
}
#[doc = "0xa8 - Service Request Selector"]
#[inline(always)]
pub const fn srs(&self) -> &SRS {
&self.srs
}
#[doc = "0xac - Interrupt Status Set"]
#[inline(always)]
pub const fn sws(&self) -> &SWS {
&self.sws
}
#[doc = "0xb0 - Interrupt Status Clear"]
#[inline(always)]
pub const fn swr(&self) -> &SWR {
&self.swr
}
#[doc = "0xb4 - Shadow transfer control"]
#[inline(always)]
pub const fn stc(&self) -> &STC {
&self.stc
}
#[doc = "0xb8 - Extended Read Back 0"]
#[inline(always)]
pub const fn ecrd0(&self) -> &ECRD0 {
&self.ecrd0
}
#[doc = "0xbc - Extended Read Back 1"]
#[inline(always)]
pub const fn ecrd1(&self) -> &ECRD1 {
&self.ecrd1
}
}
#[doc = "INS (rw) register accessor: Input Selector Configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ins::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ins::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ins`]
module"]
pub type INS = crate::Reg<ins::INS_SPEC>;
#[doc = "Input Selector Configuration"]
pub mod ins;
#[doc = "CMC (rw) register accessor: Connection Matrix Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmc`]
module"]
pub type CMC = crate::Reg<cmc::CMC_SPEC>;
#[doc = "Connection Matrix Control"]
pub mod cmc;
#[doc = "TCST (r) register accessor: Slice Timer Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tcst::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tcst`]
module"]
pub type TCST = crate::Reg<tcst::TCST_SPEC>;
#[doc = "Slice Timer Status"]
pub mod tcst;
#[doc = "TCSET (w) register accessor: Slice Timer Run Set\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tcset::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tcset`]
module"]
pub type TCSET = crate::Reg<tcset::TCSET_SPEC>;
#[doc = "Slice Timer Run Set"]
pub mod tcset;
#[doc = "TCCLR (w) register accessor: Slice Timer Clear\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tcclr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tcclr`]
module"]
pub type TCCLR = crate::Reg<tcclr::TCCLR_SPEC>;
#[doc = "Slice Timer Clear"]
pub mod tcclr;
#[doc = "TC (rw) register accessor: Slice Timer Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tc`]
module"]
pub type TC = crate::Reg<tc::TC_SPEC>;
#[doc = "Slice Timer Control"]
pub mod tc;
#[doc = "PSL (rw) register accessor: Passive Level Config\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`psl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`psl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@psl`]
module"]
pub type PSL = crate::Reg<psl::PSL_SPEC>;
#[doc = "Passive Level Config"]
pub mod psl;
#[doc = "DIT (r) register accessor: Dither Config\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dit::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dit`]
module"]
pub type DIT = crate::Reg<dit::DIT_SPEC>;
#[doc = "Dither Config"]
pub mod dit;
#[doc = "DITS (rw) register accessor: Dither Shadow Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dits::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dits::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dits`]
module"]
pub type DITS = crate::Reg<dits::DITS_SPEC>;
#[doc = "Dither Shadow Register"]
pub mod dits;
#[doc = "PSC (rw) register accessor: Prescaler Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`psc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`psc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@psc`]
module"]
pub type PSC = crate::Reg<psc::PSC_SPEC>;
#[doc = "Prescaler Control"]
pub mod psc;
#[doc = "FPC (rw) register accessor: Floating Prescaler Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fpc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`fpc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fpc`]
module"]
pub type FPC = crate::Reg<fpc::FPC_SPEC>;
#[doc = "Floating Prescaler Control"]
pub mod fpc;
#[doc = "FPCS (rw) register accessor: Floating Prescaler Shadow\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fpcs::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`fpcs::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fpcs`]
module"]
pub type FPCS = crate::Reg<fpcs::FPCS_SPEC>;
#[doc = "Floating Prescaler Shadow"]
pub mod fpcs;
#[doc = "PR (r) register accessor: Timer Period Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`pr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pr`]
module"]
pub type PR = crate::Reg<pr::PR_SPEC>;
#[doc = "Timer Period Value"]
pub mod pr;
#[doc = "PRS (rw) register accessor: Timer Shadow Period Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`prs::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`prs::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@prs`]
module"]
pub type PRS = crate::Reg<prs::PRS_SPEC>;
#[doc = "Timer Shadow Period Value"]
pub mod prs;
#[doc = "CR1 (r) register accessor: Channel 1 Compare Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cr1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cr1`]
module"]
pub type CR1 = crate::Reg<cr1::CR1_SPEC>;
#[doc = "Channel 1 Compare Value"]
pub mod cr1;
#[doc = "CR1S (rw) register accessor: Channel 1 Compare Shadow Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cr1s::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cr1s::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cr1s`]
module"]
pub type CR1S = crate::Reg<cr1s::CR1S_SPEC>;
#[doc = "Channel 1 Compare Shadow Value"]
pub mod cr1s;
#[doc = "CR2 (r) register accessor: Channel 2 Compare Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cr2::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cr2`]
module"]
pub type CR2 = crate::Reg<cr2::CR2_SPEC>;
#[doc = "Channel 2 Compare Value"]
pub mod cr2;
#[doc = "CR2S (rw) register accessor: Channel 2 Compare Shadow Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cr2s::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cr2s::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cr2s`]
module"]
pub type CR2S = crate::Reg<cr2s::CR2S_SPEC>;
#[doc = "Channel 2 Compare Shadow Value"]
pub mod cr2s;
#[doc = "CHC (rw) register accessor: Channel Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chc`]
module"]
pub type CHC = crate::Reg<chc::CHC_SPEC>;
#[doc = "Channel Control"]
pub mod chc;
#[doc = "DTC (rw) register accessor: Dead Time Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dtc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dtc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dtc`]
module"]
pub type DTC = crate::Reg<dtc::DTC_SPEC>;
#[doc = "Dead Time Control"]
pub mod dtc;
#[doc = "DC1R (rw) register accessor: Channel 1 Dead Time Values\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dc1r::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dc1r::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dc1r`]
module"]
pub type DC1R = crate::Reg<dc1r::DC1R_SPEC>;
#[doc = "Channel 1 Dead Time Values"]
pub mod dc1r;
#[doc = "DC2R (rw) register accessor: Channel 2 Dead Time Values\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dc2r::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dc2r::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dc2r`]
module"]
pub type DC2R = crate::Reg<dc2r::DC2R_SPEC>;
#[doc = "Channel 2 Dead Time Values"]
pub mod dc2r;
#[doc = "TIMER (rw) register accessor: Timer Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer`]
module"]
pub type TIMER = crate::Reg<timer::TIMER_SPEC>;
#[doc = "Timer Value"]
pub mod timer;
#[doc = "C0V (r) register accessor: Capture Register 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`c0v::R`]. WARN: One or more dependent resources other than the current register are immediately affected by a read operation. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@c0v`]
module"]
pub type C0V = crate::Reg<c0v::C0V_SPEC>;
#[doc = "Capture Register 0"]
pub mod c0v;
#[doc = "C1V (r) register accessor: Capture Register 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`c1v::R`]. WARN: One or more dependent resources other than the current register are immediately affected by a read operation. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@c1v`]
module"]
pub type C1V = crate::Reg<c1v::C1V_SPEC>;
#[doc = "Capture Register 1"]
pub mod c1v;
#[doc = "C2V (r) register accessor: Capture Register 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`c2v::R`]. WARN: One or more dependent resources other than the current register are immediately affected by a read operation. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@c2v`]
module"]
pub type C2V = crate::Reg<c2v::C2V_SPEC>;
#[doc = "Capture Register 2"]
pub mod c2v;
#[doc = "C3V (r) register accessor: Capture Register 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`c3v::R`]. WARN: One or more dependent resources other than the current register are immediately affected by a read operation. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@c3v`]
module"]
pub type C3V = crate::Reg<c3v::C3V_SPEC>;
#[doc = "Capture Register 3"]
pub mod c3v;
#[doc = "INTS (r) register accessor: Interrupt Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ints::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ints`]
module"]
pub type INTS = crate::Reg<ints::INTS_SPEC>;
#[doc = "Interrupt Status"]
pub mod ints;
#[doc = "INTE (rw) register accessor: Interrupt Enable Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`inte::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`inte::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@inte`]
module"]
pub type INTE = crate::Reg<inte::INTE_SPEC>;
#[doc = "Interrupt Enable Control"]
pub mod inte;
#[doc = "SRS (rw) register accessor: Service Request Selector\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`srs::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`srs::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@srs`]
module"]
pub type SRS = crate::Reg<srs::SRS_SPEC>;
#[doc = "Service Request Selector"]
pub mod srs;
#[doc = "SWS (w) register accessor: Interrupt Status Set\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sws::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sws`]
module"]
pub type SWS = crate::Reg<sws::SWS_SPEC>;
#[doc = "Interrupt Status Set"]
pub mod sws;
#[doc = "SWR (w) register accessor: Interrupt Status Clear\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`swr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@swr`]
module"]
pub type SWR = crate::Reg<swr::SWR_SPEC>;
#[doc = "Interrupt Status Clear"]
pub mod swr;
#[doc = "STC (rw) register accessor: Shadow transfer control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`stc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`stc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@stc`]
module"]
pub type STC = crate::Reg<stc::STC_SPEC>;
#[doc = "Shadow transfer control"]
pub mod stc;
#[doc = "ECRD0 (r) register accessor: Extended Read Back 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ecrd0::R`]. WARN: One or more dependent resources other than the current register are immediately affected by a read operation. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ecrd0`]
module"]
pub type ECRD0 = crate::Reg<ecrd0::ECRD0_SPEC>;
#[doc = "Extended Read Back 0"]
pub mod ecrd0;
#[doc = "ECRD1 (r) register accessor: Extended Read Back 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ecrd1::R`]. WARN: One or more dependent resources other than the current register are immediately affected by a read operation. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ecrd1`]
module"]
pub type ECRD1 = crate::Reg<ecrd1::ECRD1_SPEC>;
#[doc = "Extended Read Back 1"]
pub mod ecrd1;