#[doc = "Reader of register BYPCR"]
pub type R = crate::R<u32, super::BYPCR>;
#[doc = "Writer for register BYPCR"]
pub type W = crate::W<u32, super::BYPCR>;
#[doc = "Register BYPCR `reset()`'s with value 0"]
impl crate::ResetValue for super::BYPCR {
type Type = u32;
#[inline(always)]
fn reset_value() -> Self::Type {
0
}
}
#[doc = "Reader of field `BWLE`"]
pub type BWLE_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `BWLE`"]
pub struct BWLE_W<'a> {
w: &'a mut W,
}
impl<'a> BWLE_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !0x0f) | ((value as u32) & 0x0f);
self.w
}
}
#[doc = "Bypass Data Single Shot Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum BDSSM_A {
#[doc = "0: The bypass data is still considered as valid after it has been loaded into TBUF. The loading of the data into TBUF does not clear BDV."]
VALUE1,
#[doc = "1: The bypass data is considered as invalid after it has been loaded into TBUF. The loading of the data into TBUF clears BDV."]
VALUE2,
}
impl From<BDSSM_A> for bool {
#[inline(always)]
fn from(variant: BDSSM_A) -> Self {
match variant {
BDSSM_A::VALUE1 => false,
BDSSM_A::VALUE2 => true,
}
}
}
#[doc = "Reader of field `BDSSM`"]
pub type BDSSM_R = crate::R<bool, BDSSM_A>;
impl BDSSM_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> BDSSM_A {
match self.bits {
false => BDSSM_A::VALUE1,
true => BDSSM_A::VALUE2,
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == BDSSM_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == BDSSM_A::VALUE2
}
}
#[doc = "Write proxy for field `BDSSM`"]
pub struct BDSSM_W<'a> {
w: &'a mut W,
}
impl<'a> BDSSM_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: BDSSM_A) -> &'a mut W {
{
self.bit(variant.into())
}
}
#[doc = "The bypass data is still considered as valid after it has been loaded into TBUF. The loading of the data into TBUF does not clear BDV."]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(BDSSM_A::VALUE1)
}
#[doc = "The bypass data is considered as invalid after it has been loaded into TBUF. The loading of the data into TBUF clears BDV."]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(BDSSM_A::VALUE2)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 8)) | (((value as u32) & 0x01) << 8);
self.w
}
}
#[doc = "Bypass Data Enable\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum BDEN_A {
#[doc = "0: The transfer of bypass data is disabled."]
VALUE1,
#[doc = "1: The transfer of bypass data to TBUF is possible. Bypass data will be transferred to TBUF according to its priority if BDV = 1."]
VALUE2,
#[doc = "2: Gated bypass data transfer is enabled. Bypass data will be transferred to TBUF according to its priority if BDV = 1 and while DX2S = 0."]
VALUE3,
#[doc = "3: Gated bypass data transfer is enabled. Bypass data will be transferred to TBUF according to its priority if BDV = 1 and while DX2S = 1."]
VALUE4,
}
impl From<BDEN_A> for u8 {
#[inline(always)]
fn from(variant: BDEN_A) -> Self {
match variant {
BDEN_A::VALUE1 => 0,
BDEN_A::VALUE2 => 1,
BDEN_A::VALUE3 => 2,
BDEN_A::VALUE4 => 3,
}
}
}
#[doc = "Reader of field `BDEN`"]
pub type BDEN_R = crate::R<u8, BDEN_A>;
impl BDEN_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> BDEN_A {
match self.bits {
0 => BDEN_A::VALUE1,
1 => BDEN_A::VALUE2,
2 => BDEN_A::VALUE3,
3 => BDEN_A::VALUE4,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == BDEN_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == BDEN_A::VALUE2
}
#[doc = "Checks if the value of the field is `VALUE3`"]
#[inline(always)]
pub fn is_value3(&self) -> bool {
*self == BDEN_A::VALUE3
}
#[doc = "Checks if the value of the field is `VALUE4`"]
#[inline(always)]
pub fn is_value4(&self) -> bool {
*self == BDEN_A::VALUE4
}
}
#[doc = "Write proxy for field `BDEN`"]
pub struct BDEN_W<'a> {
w: &'a mut W,
}
impl<'a> BDEN_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: BDEN_A) -> &'a mut W {
{
self.bits(variant.into())
}
}
#[doc = "The transfer of bypass data is disabled."]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(BDEN_A::VALUE1)
}
#[doc = "The transfer of bypass data to TBUF is possible. Bypass data will be transferred to TBUF according to its priority if BDV = 1."]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(BDEN_A::VALUE2)
}
#[doc = "Gated bypass data transfer is enabled. Bypass data will be transferred to TBUF according to its priority if BDV = 1 and while DX2S = 0."]
#[inline(always)]
pub fn value3(self) -> &'a mut W {
self.variant(BDEN_A::VALUE3)
}
#[doc = "Gated bypass data transfer is enabled. Bypass data will be transferred to TBUF according to its priority if BDV = 1 and while DX2S = 1."]
#[inline(always)]
pub fn value4(self) -> &'a mut W {
self.variant(BDEN_A::VALUE4)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x03 << 10)) | (((value as u32) & 0x03) << 10);
self.w
}
}
#[doc = "Bypass Data Valid Trigger\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum BDVTR_A {
#[doc = "0: Bit BDV is not influenced by DX2T."]
VALUE1,
#[doc = "1: Bit BDV is set if DX2T is active."]
VALUE2,
}
impl From<BDVTR_A> for bool {
#[inline(always)]
fn from(variant: BDVTR_A) -> Self {
match variant {
BDVTR_A::VALUE1 => false,
BDVTR_A::VALUE2 => true,
}
}
}
#[doc = "Reader of field `BDVTR`"]
pub type BDVTR_R = crate::R<bool, BDVTR_A>;
impl BDVTR_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> BDVTR_A {
match self.bits {
false => BDVTR_A::VALUE1,
true => BDVTR_A::VALUE2,
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == BDVTR_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == BDVTR_A::VALUE2
}
}
#[doc = "Write proxy for field `BDVTR`"]
pub struct BDVTR_W<'a> {
w: &'a mut W,
}
impl<'a> BDVTR_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: BDVTR_A) -> &'a mut W {
{
self.bit(variant.into())
}
}
#[doc = "Bit BDV is not influenced by DX2T."]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(BDVTR_A::VALUE1)
}
#[doc = "Bit BDV is set if DX2T is active."]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(BDVTR_A::VALUE2)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 12)) | (((value as u32) & 0x01) << 12);
self.w
}
}
#[doc = "Bypass Priority\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum BPRIO_A {
#[doc = "0: The transmit FIFO data has a higher priority than the bypass data."]
VALUE1,
#[doc = "1: The bypass data has a higher priority than the transmit FIFO data."]
VALUE2,
}
impl From<BPRIO_A> for bool {
#[inline(always)]
fn from(variant: BPRIO_A) -> Self {
match variant {
BPRIO_A::VALUE1 => false,
BPRIO_A::VALUE2 => true,
}
}
}
#[doc = "Reader of field `BPRIO`"]
pub type BPRIO_R = crate::R<bool, BPRIO_A>;
impl BPRIO_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> BPRIO_A {
match self.bits {
false => BPRIO_A::VALUE1,
true => BPRIO_A::VALUE2,
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == BPRIO_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == BPRIO_A::VALUE2
}
}
#[doc = "Write proxy for field `BPRIO`"]
pub struct BPRIO_W<'a> {
w: &'a mut W,
}
impl<'a> BPRIO_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: BPRIO_A) -> &'a mut W {
{
self.bit(variant.into())
}
}
#[doc = "The transmit FIFO data has a higher priority than the bypass data."]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(BPRIO_A::VALUE1)
}
#[doc = "The bypass data has a higher priority than the transmit FIFO data."]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(BPRIO_A::VALUE2)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 13)) | (((value as u32) & 0x01) << 13);
self.w
}
}
#[doc = "Bypass Data Valid\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum BDV_A {
#[doc = "0: The bypass data is not valid."]
VALUE1,
#[doc = "1: The bypass data is valid."]
VALUE2,
}
impl From<BDV_A> for bool {
#[inline(always)]
fn from(variant: BDV_A) -> Self {
match variant {
BDV_A::VALUE1 => false,
BDV_A::VALUE2 => true,
}
}
}
#[doc = "Reader of field `BDV`"]
pub type BDV_R = crate::R<bool, BDV_A>;
impl BDV_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> BDV_A {
match self.bits {
false => BDV_A::VALUE1,
true => BDV_A::VALUE2,
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == BDV_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == BDV_A::VALUE2
}
}
#[doc = "Reader of field `BSELO`"]
pub type BSELO_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `BSELO`"]
pub struct BSELO_W<'a> {
w: &'a mut W,
}
impl<'a> BSELO_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x1f << 16)) | (((value as u32) & 0x1f) << 16);
self.w
}
}
#[doc = "Reader of field `BHPC`"]
pub type BHPC_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `BHPC`"]
pub struct BHPC_W<'a> {
w: &'a mut W,
}
impl<'a> BHPC_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x07 << 21)) | (((value as u32) & 0x07) << 21);
self.w
}
}
impl R {
#[doc = "Bits 0:3 - Bypass Word Length"]
#[inline(always)]
pub fn bwle(&self) -> BWLE_R {
BWLE_R::new((self.bits & 0x0f) as u8)
}
#[doc = "Bit 8 - Bypass Data Single Shot Mode"]
#[inline(always)]
pub fn bdssm(&self) -> BDSSM_R {
BDSSM_R::new(((self.bits >> 8) & 0x01) != 0)
}
#[doc = "Bits 10:11 - Bypass Data Enable"]
#[inline(always)]
pub fn bden(&self) -> BDEN_R {
BDEN_R::new(((self.bits >> 10) & 0x03) as u8)
}
#[doc = "Bit 12 - Bypass Data Valid Trigger"]
#[inline(always)]
pub fn bdvtr(&self) -> BDVTR_R {
BDVTR_R::new(((self.bits >> 12) & 0x01) != 0)
}
#[doc = "Bit 13 - Bypass Priority"]
#[inline(always)]
pub fn bprio(&self) -> BPRIO_R {
BPRIO_R::new(((self.bits >> 13) & 0x01) != 0)
}
#[doc = "Bit 15 - Bypass Data Valid"]
#[inline(always)]
pub fn bdv(&self) -> BDV_R {
BDV_R::new(((self.bits >> 15) & 0x01) != 0)
}
#[doc = "Bits 16:20 - Bypass Select Outputs"]
#[inline(always)]
pub fn bselo(&self) -> BSELO_R {
BSELO_R::new(((self.bits >> 16) & 0x1f) as u8)
}
#[doc = "Bits 21:23 - Bypass Hardware Port Control"]
#[inline(always)]
pub fn bhpc(&self) -> BHPC_R {
BHPC_R::new(((self.bits >> 21) & 0x07) as u8)
}
}
impl W {
#[doc = "Bits 0:3 - Bypass Word Length"]
#[inline(always)]
pub fn bwle(&mut self) -> BWLE_W {
BWLE_W { w: self }
}
#[doc = "Bit 8 - Bypass Data Single Shot Mode"]
#[inline(always)]
pub fn bdssm(&mut self) -> BDSSM_W {
BDSSM_W { w: self }
}
#[doc = "Bits 10:11 - Bypass Data Enable"]
#[inline(always)]
pub fn bden(&mut self) -> BDEN_W {
BDEN_W { w: self }
}
#[doc = "Bit 12 - Bypass Data Valid Trigger"]
#[inline(always)]
pub fn bdvtr(&mut self) -> BDVTR_W {
BDVTR_W { w: self }
}
#[doc = "Bit 13 - Bypass Priority"]
#[inline(always)]
pub fn bprio(&mut self) -> BPRIO_W {
BPRIO_W { w: self }
}
#[doc = "Bits 16:20 - Bypass Select Outputs"]
#[inline(always)]
pub fn bselo(&mut self) -> BSELO_W {
BSELO_W { w: self }
}
#[doc = "Bits 21:23 - Bypass Hardware Port Control"]
#[inline(always)]
pub fn bhpc(&mut self) -> BHPC_W {
BHPC_W { w: self }
}
}