wasmtime-fiber 24.0.8

// A WORD OF CAUTION
//
// This entire file basically needs to be kept in sync with itself. It's not
// really possible to modify just one bit of this file without understanding
// all the other bits. Documentation tries to reference various bits here and
// there but try to make sure to read over everything before tweaking things!
//
// Also at this time this file is heavily based off the x86_64 file, so you'll
// probably want to read that one as well.
//
// Finally, control flow integrity hardening has been applied to the code using
// the Pointer Authentication (PAuth) and Branch Target Identification (BTI)
// technologies from the Arm instruction set architecture:
// * All callable functions start with either the `BTI c` or `PACIASP`/`PACIBSP`
//   instructions
// * Return addresses are signed and authenticated using the stack pointer
//   value as a modifier (similarly to the salt in a HMAC operation); the
//   `DW_CFA_AARCH64_negate_ra_state` DWARF operation (aliased with the
//   `.cfi_window_save` assembler directive) informs an unwinder about this

use super::wasmtime_fiber_start;
use wasmtime_asm_macros::asm_func;

cfg_if::cfg_if! {
    if #[cfg(target_os = "macos")] {
        macro_rules! paci1716 { () => ("pacib1716\n"); }
        macro_rules! pacisp { () => ("pacibsp\n"); }
        macro_rules! autisp { () => ("autibsp\n"); }
        macro_rules! sym_adrp { ($s:tt) => (concat!($s, "@PAGE")); }
        macro_rules! sym_add { ($s:tt) => (concat!($s, "@PAGEOFF")); }
    } else {
        macro_rules! paci1716 { () => ("pacia1716\n"); }
        macro_rules! pacisp { () => ("paciasp\n"); }
        macro_rules! autisp { () => ("autiasp\n"); }
        macro_rules! sym_adrp { ($s:tt) => (concat!($s, "")); }
        macro_rules! sym_add { ($s:tt) => (concat!(":lo12:", $s)); }
    }
}

// fn(top_of_stack(%x0): *mut u8)
asm_func!(
    wasmtime_versioned_export_macros::versioned_stringify_ident!(wasmtime_fiber_switch),
    concat!(
        "
            .cfi_startproc
        ",
        pacisp!(),
        "
            .cfi_window_save
            // Save all callee-saved registers on the stack since we're
            // assuming they're clobbered as a result of the stack switch.
            stp x29, x30, [sp, -16]!
            stp x20, x19, [sp, -16]!
            stp x22, x21, [sp, -16]!
            stp x24, x23, [sp, -16]!
            stp x26, x25, [sp, -16]!
            stp x28, x27, [sp, -16]!
            stp d9, d8, [sp, -16]!
            stp d11, d10, [sp, -16]!
            stp d13, d12, [sp, -16]!
            stp d15, d14, [sp, -16]!

            // Load our previously saved stack pointer to resume to, and save
            // off our current stack pointer on where to come back to
            // eventually.
            ldr x8, [x0, -0x10]
            mov x9, sp
            str x9, [x0, -0x10]

            // Switch to the new stack and restore all our callee-saved
            // registers after the switch and return to our new stack.
            mov sp, x8
            ldp d15, d14, [sp], 16
            ldp d13, d12, [sp], 16
            ldp d11, d10, [sp], 16
            ldp d9, d8, [sp], 16
            ldp x28, x27, [sp], 16
            ldp x26, x25, [sp], 16
            ldp x24, x23, [sp], 16
            ldp x22, x21, [sp], 16
            ldp x20, x19, [sp], 16
            ldp x29, x30, [sp], 16
        ",
        autisp!(),
        "
            .cfi_window_save
            ret
            .cfi_endproc
        ",
    ),
);

// fn(
//    top_of_stack(%x0): *mut u8,
//    entry_point(%x1): extern fn(*mut u8, *mut u8),
//    entry_arg0(%x2): *mut u8,
// )
// We set up the newly initialized fiber, so that it resumes execution
// from wasmtime_fiber_start(). As a result, we need a signed address
// of this function, so there are 2 requirements:
// * The fiber stack pointer value that is used by the signing operation
//   must match the value when the pointer is authenticated inside
//   wasmtime_fiber_switch(), otherwise the latter would fault
// * We would like to use an instruction that is executed as a no-op by
//   processors that do not support PAuth, so that the code is
//   backward-compatible and there is no duplication; `PACIA1716` is a
//   suitable one, which has the following operand register
//   conventions:
//   * X17 contains the pointer value to sign
//   * X16 contains the modifier value
//
// TODO: Use the PACGA instruction to authenticate the saved register
// state, which avoids creating signed pointers to
// wasmtime_fiber_start(), and provides wider coverage.
#[rustfmt::skip]
asm_func!(
    wasmtime_versioned_export_macros::versioned_stringify_ident!(wasmtime_fiber_init),
    concat!(
        "
            .cfi_startproc
            hint #34 // bti c
            sub x16, x0, #16
            adrp x17, ", sym_adrp!("{fiber}"), "
            add x17, x17, ", sym_add!("{fiber}"), "
        ",
        paci1716!(),
        "
            str x17, [x16, -0x8] // x17 => lr
            str x0, [x16, -0x18] // x0 => x19
            stp x2, x1, [x0, -0x38] // x1 => x20, x2 => x21

            // `wasmtime_fiber_switch` has an 0xa0 byte stack, and we add 0x10 more for
            // the original reserved 16 bytes.
            add x8, x0, -0xb0
            str x8, [x0, -0x10]
            ret
            .cfi_endproc
        ",
    ),
    fiber = sym wasmtime_fiber_start,
);

// See the x86_64 file for more commentary on what these CFI directives are
// doing. Like over there note that the relative offsets to registers here
// match the frame layout in `wasmtime_fiber_switch`.
asm_func!(
    wasmtime_versioned_export_macros::versioned_stringify_ident!(wasmtime_fiber_start),
    "
        .cfi_startproc simple
        .cfi_def_cfa_offset 0
        .cfi_escape 0x0f,    /* DW_CFA_def_cfa_expression */ \
            5,               /* the byte length of this expression */ \
            0x6f,            /* DW_OP_reg31(%sp) */ \
            0x06,            /* DW_OP_deref */ \
            0x23, 0xa0, 0x1  /* DW_OP_plus_uconst 0xa0 */
        .cfi_rel_offset x29, -0x10
        .cfi_rel_offset x30, -0x08
        .cfi_window_save
        .cfi_rel_offset x19, -0x18
        .cfi_rel_offset x20, -0x20
        .cfi_rel_offset x21, -0x28
        .cfi_rel_offset x22, -0x30
        .cfi_rel_offset x23, -0x38
        .cfi_rel_offset x24, -0x40
        .cfi_rel_offset x25, -0x48
        .cfi_rel_offset x26, -0x50
        .cfi_rel_offset x27, -0x58

        // Load our two arguments from the stack, where x1 is our start
        // procedure and x0 is its first argument. This also blows away the
        // stack space used by those two arguments.
        mov x0, x21
        mov x1, x19

        // ... and then we call the function! Note that this is a function call
        // so our frame stays on the stack to backtrace through.
        blr x20
        // Unreachable, here for safety. This should help catch unexpected
        // behaviors.  Use a noticeable payload so one can grep for it in the
        // codebase.
        brk 0xf1b3
        .cfi_endproc
    ",
);