transmux 0.27.7

//! Per-track codec configuration — [`CodecConfig`] + [`DataCarriage`].
//!
//! Moved out of `pipeline.rs` (media plane step 2a, no-op): same types, same
//! fields, same impls.

use alloc::vec::Vec;

use crate::ac3::{Ac3SpecificBox, Ec3SpecificBox};
use crate::ac4::Ac4SpecificBox;
use crate::av1::Av1ConfigurationBox;
use crate::avc_config::AVCConfigurationBox;
use crate::dts::DtsSpecificBox;
use crate::flac::FlacSpecificBox;
use crate::hevc_config::HEVCConfigurationBox;
use crate::mp4esds::EsdsBox;
use crate::opus::OpusSpecificBox;
use crate::vp9::Vp9ConfigurationBox;
use crate::vvc_config::VvcConfigurationBox;

/// Whether a [`CodecConfig::Data`] elementary stream carries PES packets or
/// PSI/private sections on its PID.
///
/// ISO/IEC 13818-1 §2.4.4.8 / Table 2-34 splits `stream_type` into two
/// carriage families: most types (subtitles, teletext, SMPTE 2038 ANC,
/// metadata, and any unrecognised value) are PES-packetised (§2.4.3.6); a
/// fixed set (`0x05` private_sections, `0x0A`-`0x0D` DSM-CC, `0x14` DSM-CC
/// synchronized download, `0x86` SCTE-35/ANSI-scoped) are carried as raw
/// PSI-style sections instead (§2.4.4), with no PES header at all.
/// Reassembling a section stream with a PES parser (or vice versa) silently
/// yields nothing, so a demuxer/muxer must dispatch on this before touching
/// the payload — see `crate::ts_demux` / `crate::ts_mux` (issue #576).
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
#[non_exhaustive]
pub enum DataCarriage {
    /// The elementary stream is PES-packetised (ISO/IEC 13818-1 §2.4.3.6).
    Pes,
    /// The elementary stream carries PSI/private sections directly on its
    /// PID (ISO/IEC 13818-1 §2.4.4), with no PES header at all.
    Sections,
}

impl DataCarriage {
    /// A short label for this carriage kind.
    pub fn name(&self) -> &'static str {
        match self {
            DataCarriage::Pes => "pes",
            DataCarriage::Sections => "sections",
        }
    }
}

broadcast_common::impl_spec_display!(DataCarriage);

/// The wire format of a [`CodecConfig::Subtitle`] track (media plane step 2d).
///
/// `Ttml`/`WebVtt` are ISOBMFF sample entries this crate demuxes
/// ([`crate::media::Fmp4Demux`]); `DvbBitmap`/`Teletext` name the PES-carried
/// broadcast subtitle formats a TS demuxer can identify from their PMT
/// descriptors (ETSI EN 300 468) but does not yet classify as
/// `CodecConfig::Subtitle` itself (still `CodecConfig::Data` on that path
/// today) — the variant exists so a future TS-side classifier has a home
/// without another breaking enum change.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
#[non_exhaustive]
pub enum SubtitleFormat {
    /// TTML/IMSC XML subtitles (ISO BMFF `stpp` sample entry, ISO/IEC
    /// 14496-30 §7.2).
    Ttml,
    /// WebVTT subtitles (ISO BMFF `wvtt` sample entry, ISO/IEC 14496-30 §9.2).
    WebVtt,
    /// DVB (bitmap) subtitling, carried as a PES stream (ETSI EN 300 743).
    DvbBitmap,
    /// Teletext, carried as a PES stream (ETSI EN 300 706 / EN 300 472).
    Teletext,
}

impl SubtitleFormat {
    /// A short label for this subtitle format.
    pub fn name(&self) -> &'static str {
        match self {
            SubtitleFormat::Ttml => "TTML (stpp)",
            SubtitleFormat::WebVtt => "WebVTT (wvtt)",
            SubtitleFormat::DvbBitmap => "DVB bitmap subtitle",
            SubtitleFormat::Teletext => "Teletext",
        }
    }
}

broadcast_common::impl_spec_display!(SubtitleFormat);

/// The ISOBMFF subtitle sample entry a [`CodecConfig::Subtitle`] track was
/// demuxed from (ISO/IEC 14496-30), carried whole so the track can be re-muxed
/// (issue #1186, ex-`TODO(#753)`).
#[derive(Debug, Clone, PartialEq, Eq)]
#[non_exhaustive]
pub enum SubtitleSampleEntry {
    /// `stpp` XMLSubtitleSampleEntry (TTML/IMSC), ISO/IEC 14496-30 §7.2.
    Ttml(crate::subtitle_entries::XmlSubtitleSampleEntry),
    /// `wvtt` WVTTSampleEntry (WebVTT), ISO/IEC 14496-30 §9.2.
    WebVtt(crate::subtitle_entries::WvttSampleEntry),
}

/// Per-track codec configuration for the initialization segment.
#[derive(Debug, Clone)]
#[non_exhaustive]
pub enum CodecConfig {
    /// H.264/AVC video (`avc1` sample entry with an `avcC` config box).
    Avc {
        /// The `avcC` decoder configuration record.
        config: AVCConfigurationBox,
        /// Coded width in pixels.
        width: u16,
        /// Coded height in pixels.
        height: u16,
    },
    /// H.265/HEVC video (`hvc1`/`hev1` sample entry with an `hvcC` config box) —
    /// ISO/IEC 14496-15:2017 §8.4.
    Hevc {
        /// The `hvcC` decoder configuration record box.
        config: HEVCConfigurationBox,
        /// Coded width in pixels.
        width: u16,
        /// Coded height in pixels.
        height: u16,
    },
    /// H.266/VVC video (`vvc1`/`vvi1` sample entry with a `vvcC` config box) —
    /// ISO/IEC 14496-15:2022 §11.3.3.
    Vvc {
        /// The `vvcC` decoder configuration record box.
        config: VvcConfigurationBox,
        /// Coded width in pixels.
        width: u16,
        /// Coded height in pixels.
        height: u16,
    },
    /// AAC audio (`mp4a` sample entry with an `esds` box).
    Aac {
        /// The `esds` box carrying the AudioSpecificConfig.
        esds: EsdsBox,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz (stored 16.16 in the sample entry).
        sample_rate: u32,
        /// Sample size in bits (typically 16).
        sample_size: u16,
    },
    /// AC-3 audio (`ac-3` sample entry with a `dac3` box).
    Ac3 {
        /// The `dac3` config box.
        config: Ac3SpecificBox,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz.
        sample_rate: u32,
        /// Sample size in bits (typically 16).
        sample_size: u16,
    },
    /// E-AC-3 audio (`ec-3` sample entry with a `dec3` box).
    Eac3 {
        /// The `dec3` config box.
        config: Ec3SpecificBox,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz.
        sample_rate: u32,
        /// Sample size in bits (typically 16).
        sample_size: u16,
    },
    /// AV1 video (`av01` sample entry with an `av1C` box).
    Av1 {
        /// The `av1C` configuration box.
        config: Av1ConfigurationBox,
        /// Coded width in pixels.
        width: u16,
        /// Coded height in pixels.
        height: u16,
    },
    /// VP9 video (`vp09` sample entry with a `vpcC` box).
    Vp9 {
        /// The `vpcC` configuration box.
        config: Vp9ConfigurationBox,
        /// Coded width in pixels.
        width: u16,
        /// Coded height in pixels.
        height: u16,
    },
    /// Opus audio (`Opus` sample entry with a `dOps` box).
    Opus {
        /// The `dOps` config box.
        config: OpusSpecificBox,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz (stored 16.16; per spec always 48000).
        sample_rate: u32,
        /// Sample size in bits (typically 16).
        sample_size: u16,
    },
    /// FLAC audio (`fLaC` sample entry with a `dfLa` box).
    Flac {
        /// The `dfLa` config box.
        config: FlacSpecificBox,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz.
        sample_rate: u32,
        /// Sample size in bits.
        sample_size: u16,
    },
    /// AC-4 audio (`ac-4` sample entry with a `dac4` box).
    Ac4 {
        /// The `dac4` config box (opaque `ac4_dsi_v1()`).
        config: Ac4SpecificBox,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz.
        sample_rate: u32,
        /// Sample size in bits (16 per spec).
        sample_size: u16,
    },
    /// MPEG-H 3D Audio (`mha1` sample entry with an `mhaC` box) — ISO/IEC 23008-3 §20.
    ///
    /// Use `mha1` for raw MHAS frames (config in `mhaC`).  For in-band MHAS
    /// (`mhm1`) the caller should convert the `codec_type` on the resulting
    /// [`MhaSampleEntry`](crate::init_segment::MhaSampleEntry) if needed;
    /// `build_trak` always emits `mha1`.
    MpegH {
        /// The `MHADecoderConfigurationRecord` carried in the `mhaC` box.
        config: crate::mpegh::MHADecoderConfigurationRecord,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz.
        sample_rate: u32,
        /// Sample size in bits (typically 16).
        sample_size: u16,
    },
    /// MPEG-2 video / H.262 (`mp4v` sample entry with an `esds` box) —
    /// ISO/IEC 13818-2 (ITU-T H.262) carried per ISO/IEC 14496-1 §7.2.6.6
    /// (ObjectTypeIndication 0x60–0x65, 0x61 = MPEG-2 Main Visual).
    ///
    /// The `esds` carries the ES/decoder descriptors (its DecoderSpecificInfo
    /// optionally the `sequence_header()` bytes); the coded picture geometry is
    /// decoded from the in-band `sequence_header()` (ISO/IEC 13818-2 §6.2.2.1).
    Mpeg2Video {
        /// The `esds` box (its body is re-embedded byte-identically).
        esds: EsdsBox,
        /// Coded width in pixels (from the `sequence_header()`).
        width: u16,
        /// Coded height in pixels (from the `sequence_header()`).
        height: u16,
    },
    /// MPEG-1/2 audio, Layers I/II/III (`mp4a` sample entry with an `esds` box)
    /// — ISO/IEC 11172-3 / ISO/IEC 13818-3, carried per ISO/IEC 14496-1
    /// §7.2.6.6 (ObjectTypeIndication 0x69 = MPEG-2 audio, 0x6B = MPEG-1 audio).
    MpegAudio {
        /// The `esds` box (OTI 0x69/0x6B; DecoderSpecificInfo usually empty).
        esds: EsdsBox,
        /// Audio layer (1/2/3), from the first frame header.
        layer: crate::mpeg_legacy::MpegAudioLayer,
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz.
        sample_rate: u32,
        /// Sample size in bits (typically 16).
        sample_size: u16,
    },
    /// DTS audio (`dtsc`/`dtsh`/`dtsl`/`dtse` sample entry with a `ddts` box) —
    /// ETSI TS 102 114 §E.2.
    ///
    /// `codec_fourcc` selects the sample-entry FourCC:
    /// `dtsc` (core only), `dtsh` (core + extension / multi-asset),
    /// `dtsl` (LBR only), or `dtse` (extension substream only).
    /// Use [`crate::dts::DTSC_FOURCC`] etc. for the named constants.
    Dts {
        /// The `ddts` DTSSpecificBox.
        config: DtsSpecificBox,
        /// Sample-entry FourCC: one of `dtsc`, `dtsh`, `dtsl`, `dtse`.
        codec_fourcc: [u8; 4],
        /// Channel count.
        channel_count: u16,
        /// Sampling rate in Hz (48000, 44100, or 32000 per §E.2.2.2).
        sample_rate: u32,
        /// Sample size in bits (always 16 per §E.2.2.2).
        sample_size: u16,
    },
    /// VP8 video (WebM-native; RFC 6386).
    ///
    /// VP8 has **no** out-of-band configuration box — the coded dimensions are
    /// carried in the key-frame header (RFC 6386 §9.1) and decoded from the first
    /// key frame at demux time (see `transmux/docs/codec/vp8-vorbis-webm.md`).
    /// Carried in the IR for `{WebM} → IR → {WebM}` / inspection; there is no
    /// ISOBMFF sample entry for VP8 in this crate (out of scope), so it does not
    /// participate in the fMP4 mux path.
    Vp8 {
        /// Coded width in pixels (key-frame header, masked `& 0x3FFF`).
        width: u16,
        /// Coded height in pixels (key-frame header, masked `& 0x3FFF`).
        height: u16,
    },
    /// Vorbis audio (WebM-native; Vorbis I specification, xiph.org).
    ///
    /// The three setup headers (Identification / Comment / Setup) are carried
    /// verbatim in `codec_private` (Xiph-laced, exactly as WebM `CodecPrivate`
    /// stores them — see `transmux/docs/codec/vp8-vorbis-webm.md`); `channels`
    /// and `sample_rate` are decoded from the Identification header (Vorbis I
    /// §4.2.2). Carried in the IR for `{WebM} → IR → {WebM}` / inspection; there
    /// is no ISOBMFF sample entry for Vorbis in this crate (out of scope), so it
    /// does not participate in the fMP4 mux path.
    Vorbis {
        /// The Xiph-laced 3-header `CodecPrivate`, verbatim.
        codec_private: Vec<u8>,
        /// Channel count (`audio_channels`, Vorbis I §4.2.2).
        channels: u16,
        /// Sampling rate in Hz (`audio_sample_rate`, Vorbis I §4.2.2).
        sample_rate: u32,
    },
    /// Subtitle track (media plane step 2d): a TTML/WebVTT ISOBMFF sample
    /// entry (`stpp`/`wvtt`, ISO/IEC 14496-30) demuxed by
    /// [`crate::media::Fmp4Demux`], carried losslessly rather than dropped.
    /// Samples are opaque payloads (TTML XML documents / WebVTT `vttc`/`vtte`
    /// boxes) — this crate never parses cue contents, only the sample
    /// entry's format tag.
    ///
    /// A track demuxed from ISOBMFF carries its full sample entry
    /// (`sample_entry`) and so re-muxes; a track with no sample entry
    /// (`sample_entry: None`) cannot be reconstructed, so every fMP4/CMAF mux
    /// entry point rejects it — naming it with
    /// [`Error::UnmuxableSubtitleTrack`](crate::error::Error::UnmuxableSubtitleTrack)
    /// (media plane step-2 fix wave 1, B1) — rather than silently dropping or
    /// mis-emitting it; a caller must pre-filter with
    /// [`Media::select_tracks_by`](crate::media::Media::select_tracks_by).
    Subtitle {
        /// Which subtitle wire format this track carries.
        format: SubtitleFormat,
        /// The ISOBMFF sample entry (`stpp` / `wvtt`) the track was demuxed
        /// from, carried whole (namespace / `vttC` header block / trailing
        /// boxes) so `build_trak` can re-emit it byte-for-byte (issue #1186,
        /// ex-`TODO(#753)`). `None` for a subtitle track with no ISOBMFF
        /// origin (a TS DVB/Teletext stream): such a track has no sample
        /// entry to reconstruct and is rejected by every fMP4/CMAF mux entry
        /// point with
        /// [`Error::UnmuxableSubtitleTrack`](crate::error::Error::UnmuxableSubtitleTrack).
        sample_entry: Option<SubtitleSampleEntry>,
    },
    /// Opaque data track (issue #557/#576): a PMT-listed elementary stream
    /// whose `stream_type` is not a codec this crate decodes (DVB subtitles
    /// EN 300 743, teletext EN 300 472, SMPTE 2038 ANC, ID3/KLV metadata,
    /// SCTE-35, DSM-CC, private sections, and any other/unrecognised
    /// `stream_type`) — carried losslessly rather than dropped. `stream_type`
    /// per ISO/IEC 13818-1 Table 2-34; `descriptors` is the raw PMT ES_info
    /// descriptor loop so consumers can classify it (e.g. with dvb-si's
    /// parsers); `carriage` records whether the samples are PES payloads or
    /// whole PSI/private sections — see [`DataCarriage`].
    ///
    /// Carried in the IR for `{TS} → IR → {TS}` / inspection; there is no
    /// ISOBMFF sample entry for an opaque stream in this crate (out of
    /// scope), so it does not participate in the fMP4 mux path (mirrors
    /// [`CodecConfig::Vp8`] / [`CodecConfig::Vorbis`]) — every fMP4/CMAF mux
    /// entry point (media plane step-2 fix wave 1) rejects such a track,
    /// naming it, rather than silently omitting it (issue #576/#557); a
    /// caller mixing carriable and opaque tracks must pre-filter with
    /// [`Media::select_tracks_by`](crate::media::Media::select_tracks_by) —
    /// see [`CodecConfig::is_muxable_in_bmff`].
    Data {
        /// PMT `stream_type` (ISO/IEC 13818-1 Table 2-34).
        stream_type: u8,
        /// The raw PMT ES_info descriptor-loop bytes for this stream.
        descriptors: Vec<u8>,
        /// Whether this elementary stream carries PES packets or PSI/private
        /// sections (ISO/IEC 13818-1 §2.4.4.8) — determines how a demuxer
        /// reassembles it and how a muxer re-emits it.
        carriage: DataCarriage,
    },
}

impl CodecConfig {
    pub(crate) fn is_audio(&self) -> bool {
        matches!(
            self,
            CodecConfig::Aac { .. }
                | CodecConfig::Ac3 { .. }
                | CodecConfig::Eac3 { .. }
                | CodecConfig::Opus { .. }
                | CodecConfig::Flac { .. }
                | CodecConfig::Ac4 { .. }
                | CodecConfig::MpegH { .. }
                | CodecConfig::Dts { .. }
                | CodecConfig::MpegAudio { .. }
                | CodecConfig::Vorbis { .. }
        )
    }

    /// Sampling rate in Hz of an audio track, `None` for a non-audio variant
    /// (issue #1162 R2). For AAC / AC-3 / E-AC-3 / MPEG audio this is the rate
    /// the demuxer decoded from the stream's own header (ADTS
    /// `sampling_frequency_index`, AC-3 `fscod`, MPEG audio
    /// `sampling_frequency`).
    pub fn audio_sample_rate(&self) -> Option<u32> {
        match self {
            CodecConfig::Aac { sample_rate, .. }
            | CodecConfig::Ac3 { sample_rate, .. }
            | CodecConfig::Eac3 { sample_rate, .. }
            | CodecConfig::Opus { sample_rate, .. }
            | CodecConfig::Flac { sample_rate, .. }
            | CodecConfig::Ac4 { sample_rate, .. }
            | CodecConfig::MpegH { sample_rate, .. }
            | CodecConfig::Dts { sample_rate, .. }
            | CodecConfig::MpegAudio { sample_rate, .. }
            | CodecConfig::Vorbis { sample_rate, .. } => Some(*sample_rate),
            _ => None,
        }
    }

    /// Channel count of an audio track **including** the LFE channel (issue
    /// #1162 R2), `None` for a non-audio variant or when the codec config does
    /// not determine one.
    ///
    /// The `channel_count` field of [`CodecConfig::Ac3`]/[`CodecConfig::Eac3`]
    /// is full-bandwidth only (a 5.1 AC-3 track reports 5, matching the
    /// `AC3SampleEntry` `channelcount` convention); this accessor adds the LFE
    /// from the `dac3`/`dec3` `lfeon` flag (and, for E-AC-3, the extra
    /// locations of dependent substreams, ETSI TS 102 366 Table F.6.1). For the
    /// other codecs the stored `channel_count` already counts every channel
    /// (AAC: ISO/IEC 14496-3 Table 1.19, 5.1 = 6; DTS: `CHS` + LFE; MPEG audio:
    /// 1 or 2; Opus/FLAC/Vorbis have no separate LFE concept); an AAC stream
    /// whose mapping is carried in-band by a `program_config_element`, and an
    /// MPEG-H/AC-4 track whose count is unspecified, return `None`.
    pub fn channels_with_lfe(&self) -> Option<u16> {
        let n = match self {
            CodecConfig::Ac3 { config, .. } => u16::from(config.channels_with_lfe()),
            CodecConfig::Eac3 { config, .. } => u16::from(config.channels_with_lfe()),
            CodecConfig::Aac { channel_count, .. }
            | CodecConfig::Opus { channel_count, .. }
            | CodecConfig::Flac { channel_count, .. }
            | CodecConfig::Ac4 { channel_count, .. }
            | CodecConfig::MpegH { channel_count, .. }
            | CodecConfig::Dts { channel_count, .. }
            | CodecConfig::MpegAudio { channel_count, .. } => *channel_count,
            CodecConfig::Vorbis { channels, .. } => *channels,
            _ => return None,
        };
        (n != 0).then_some(n)
    }

    /// Nominal bit rate of an audio track in bits per second (issue #1162 R2),
    /// `None` when the stream does not state one or for a non-audio variant.
    ///
    /// - AC-3: `bit_rate_code` (ETSI TS 102 366 Table F.4.1, from `frmsizecod`).
    /// - E-AC-3: `dec3` `data_rate` (§F.6.2.2, whole bitstream).
    /// - MPEG audio: the first frame header's `bitrate_index`, carried as the
    ///   `esds` `avgBitrate` by the TS demuxer (constant-bitrate assumption).
    /// - AAC: ADTS and `AudioSpecificConfig` carry no bit rate; the `esds`
    ///   `avgBitrate` is reported when the source signalled a non-zero one
    ///   (0 = VBR/unknown), else `None`.
    /// - DTS: the core `ddts` `avgBitrate` (`None` for open/unspecified rate).
    pub fn nominal_bitrate(&self) -> Option<u32> {
        let bps = match self {
            CodecConfig::Ac3 { config, .. } => config.nominal_bitrate_kbps()?.checked_mul(1000)?,
            CodecConfig::Eac3 { config, .. } => config.nominal_bitrate_kbps().checked_mul(1000)?,
            CodecConfig::Aac { esds, .. } | CodecConfig::MpegAudio { esds, .. } => esds
                .es_descriptor
                .decoder_config
                .as_ref()
                .map_or(0, |dc| dc.avg_bitrate),
            CodecConfig::Dts { config, .. } => config.avg_bitrate,
            _ => return None,
        };
        (bps != 0).then_some(bps)
    }

    /// True for the opaque [`CodecConfig::Data`] variant (issue #557/#576): a
    /// PMT-carried elementary stream with no ISOBMFF sample entry in this
    /// crate. Every fMP4/CMAF mux entry point (init segment + every packager
    /// built on it) rejects such a track, naming it, rather than silently
    /// omitting it — mirrors how the TS mux path, unlike this one, *can*
    /// carry them verbatim. See [`CodecConfig::is_muxable_in_bmff`], which
    /// also covers an entry-less [`CodecConfig::Subtitle`] (B1).
    pub(crate) fn is_opaque_data(&self) -> bool {
        matches!(self, CodecConfig::Data { .. })
    }

    /// True for a [`CodecConfig::Subtitle`] with no `sample_entry`: this
    /// crate has no ISOBMFF sample entry to re-emit for it (issue #1186).
    pub(crate) fn is_subtitle_without_entry(&self) -> bool {
        matches!(
            self,
            CodecConfig::Subtitle {
                sample_entry: None,
                ..
            }
        )
    }

    /// True when `self` can be placed into an ISOBMFF `trak` by this crate —
    /// i.e. neither the opaque [`CodecConfig::Data`] carriage nor
    /// [`CodecConfig::Subtitle`] (media plane step-2 fix wave 1, B1-B4: the
    /// single predicate every fMP4/CMAF mux entry point
    /// ([`build_init_segment`](crate::pipeline::build_init_segment) and
    /// every packager built on it — `CmafMux`, `ProgressiveMux`, `Segmenter`,
    /// `LlSegmenter`, `LlHlsSegmenter`) checks before building a `trak`:
    /// a track failing this predicate is rejected, naming the track, rather
    /// than silently dropped — a caller mixing carriable and non-carriable
    /// tracks must pre-filter first (e.g. with
    /// [`Media::select_tracks_by`](crate::media::Media::select_tracks_by)).
    ///
    /// Does NOT cover the WebM-native [`CodecConfig::Vp8`]/[`CodecConfig::Vorbis`]
    /// (genuinely unimplemented fMP4 carriage, not a filterable policy choice
    /// — those still fail with the generic
    /// [`Error::UnsupportedCodec`](crate::error::Error::UnsupportedCodec)
    /// regardless of filtering).
    ///
    /// `pub` (unlike the crate's other `CodecConfig` predicates): this is the
    /// caller-facing filter predicate the `Unmuxable*Track` errors point to,
    /// e.g. `media.select_tracks_by(|t| t.spec.config.is_muxable_in_bmff())`.
    pub fn is_muxable_in_bmff(&self) -> bool {
        !(self.is_opaque_data() || self.is_subtitle_without_entry())
    }

    /// True if `self` is a video codec (issue #628) — codec-family-complete
    /// regardless of which output container actually carries it (e.g. the TS
    /// mux path does not carry every variant matched here; see
    /// `ts_mux::EsKind::from_config`). Mirrors [`CodecConfig::is_audio`]. Used
    /// to pick the anchor/segmentation track (`ts_hls::choose_anchor`,
    /// `Segmenter::new`).
    pub(crate) fn is_video(&self) -> bool {
        matches!(
            self,
            CodecConfig::Avc { .. }
                | CodecConfig::Hevc { .. }
                | CodecConfig::Vvc { .. }
                | CodecConfig::Av1 { .. }
                | CodecConfig::Vp9 { .. }
                | CodecConfig::Vp8 { .. }
                | CodecConfig::Mpeg2Video { .. }
        )
    }
}