topgrade 16.2.0

# Include any additional configuration file(s)
# [include] sections are processed in the order you write them
# Files in $CONFIG_DIR/topgrade.d/ are automatically included before this file
[include]
# paths = ["/etc/topgrade.toml"]


[misc]
# On Unix systems, Topgrade should not be run as root, it
# will run commands with sudo or equivalent where needed.
# Set this to true to suppress the warning and confirmation
# prompt if Topgrade detects it is being run as root.
# (default: false)
# allow_root = false

# Run `sudo -v` to cache credentials at the start of the run
# This avoids a blocking password prompt in the middle of an unattended run
# (default: false)
# pre_sudo = false

# Sudo command to be used
# sudo_command = "sudo"

# Disable specific steps - same options as the command line flag
# disable = ["system", "emacs"]

# Ignore failures for these steps
# ignore_failures = ["powershell"]

# List of remote machines with Topgrade installed on them
# remote_topgrades = ["toothless", "pi", "parnas"]

# Path to Topgrade executable on remote machines
# remote_topgrade_path = ".cargo/bin/topgrade"

# Arguments to pass to SSH when upgrading remote systems
# ssh_arguments = "-o ConnectTimeout=2"

# Arguments to pass tmux when pulling Repositories
# tmux_arguments = "-S /var/tmux.sock"

# Do not set the terminal title (default: true)
# set_title = true

# Display the time in step titles (default: true)
# display_time = true

# Don't ask for confirmations (no default value)
# assume_yes = true

# Do not ask to retry failed steps (default: false)
# no_retry = true

# Show the reason for skipped steps (default: false)
# This has no effect if the "only" option is specified
# show_skipped = true

# Run inside tmux (default: false)
# run_in_tmux = true

# Changes the way topgrade interacts with
# the tmux session, creating the session
# and only attaching to it if not inside tmux
# (default: "attach_if_not_in_session", allowed values: "attach_if_not_in_session", "attach_always")
# tmux_session_mode = "attach_if_not_in_session"

# Cleanup temporary or old files (default: false)
# cleanup = true

# Send a notification for every step (default: false)
# notify_each_step = false

# Skip sending a notification at the end of a run (default: false)
# skip_notify = true

# The Bash-it branch to update (default: "stable")
# bashit_branch = "stable"

# Run specific steps - same options as the command line flag
# only = ["system", "emacs"]

# Whether to self update
#
# this will be ignored if the binary is built without self update support
#
# available also via setting the environment variable TOPGRADE_NO_SELF_UPGRADE)
# no_self_update = true

# Extra tracing filter directives
# These are prepended to the `--log-filter` argument
# See: https://docs.rs/tracing-subscriber/latest/tracing_subscriber/filter/struct.EnvFilter.html#directives
# log_filters = ["topgrade::command=debug", "warn"]

# Whether to show a distribution-specific summary if applicable, e.g. listing
# Pacman backup configuration files (*.pacsave and *.pacnew)
# (default: true)
# show_distribution_summary = false


# Commands to run before anything
[pre_commands]
# "Emacs Snapshot" = "rm -rf ~/.emacs.d/elpa.bak && cp -rl ~/.emacs.d/elpa ~/.emacs.d/elpa.bak"


# Commands to run after anything
[post_commands]
# "Emacs Snapshot" = "rm -rf ~/.emacs.d/elpa.bak && cp -rl ~/.emacs.d/elpa ~/.emacs.d/elpa.bak"


# Custom commands
[commands]
# "Python Environment" = "~/dev/.env/bin/pip install -i https://pypi.python.org/simple -U --upgrade-strategy eager jupyter"
# "Custom command using interactive shell (unix)" = "-i vim_upgrade"


[python]
# enable_pip_review = true                         ###disabled by default
# enable_pip_review_local = true                   ###disabled by default
# enable_pipupgrade = true                         ###disabled by default
# pipupgrade_arguments = "-y -u --pip-path pip"    ###disabled by default

# For the poetry step, by default, Topgrade skips its update if poetry is not
# installed with the official script. This configuration entry forces Topgrade
# to run the update in this case.
#
# (default: false)
# poetry_force_self_update = true


[conda]
# Additional named conda environments to update (`conda env update -n env_name`)
# env_names = [
#     "Toolbox",
#     "PyTorch"
# ]
# Additional conda environment paths to update (`conda env update -p env_path`)
# env_paths = [
#     "~/webserver/.conda/",
#     "~/experiments/.conda/"
# ]


[composer]
# self_update = true


[brew]
# For the BrewCask step
# If `Repo Cask Upgrade` exists, then use the `-a` option.
# Otherwise, use the `--greedy` option.
# greedy_cask = true

# For the BrewCask step
# If `Repo Cask Upgrade` does not exist, then use the `--greedy_latest` option.
# NOTE: the above entry `greedy_cask` contains this entry, though you can enable
# both of them, they won't clash with each other.
# greedy_latest = true

# For the BrewCask step
# If `Repo Cask Upgrade` does not exist, then use the `--greedy_auto_updates` option.
# NOTE: the above entry `greedy_cask` contains this entry, though you can enable
# both of them, they won't clash with each other.
# greedy_auto_updates = true

# For the BrewFormula step
# Execute `brew autoremove` after the step.
# autoremove = true

# For the BrewFormula step
# Upgrade formulae built from the HEAD branch; `brew upgrade --fetch-HEAD`
# fetch_head = true


[linux]
# Arch Package Manager to use.
# Allowed values:
#   autodetect, aura, garuda_update, pacman, pamac, paru, pikaur, trizen, yay
# arch_package_manager = "pacman"

# Arguments to pass yay (or paru) when updating packages
# yay_arguments = "--nodevel"

# Arguments to pass dnf when updating packages
# dnf_arguments = "--refresh"

# aura_aur_arguments = "-kx"

# aura_pacman_arguments = ""
# garuda_update_arguments = ""

# show_arch_news = true

# trizen_arguments = "--devel"

# pikaur_arguments = ""

# pamac_arguments = "--no-devel"

# enable_tlmgr = true

# emerge_sync_flags = "-q"

# emerge_update_flags = "-uDNa --with-bdeps=y world"

# redhat_distro_sync = false

# suse_dup = false

# rpm_ostree = false

# For Fedora/CentOS/RHEL Atomic variants, if `bootc` is available and this configuration entry is set to true, use
# it to do the update - Will also supersede rpm-ostree if enabled
# (default: false)
# bootc = false

# nix_arguments = "--flake"

# nix_env_arguments = "--prebuilt-only"

# Extra Home Manager arguments
# home_manager_arguments = ["--flake", "file"]


[mandb]
# Enable the mandb step (to update manual entries).
# Mandb is updated in the background by a service on most systems by default.
# (default: false)
# enable = true


[pkgfile]
# Enable the pkgfile step (to update the pkgfile database).
# Pkgfile is sometimes installed by default, but often not used and heavy to update.
# (default: false)
# enable = true


[git]
# How many repos to pull at max in parallel
# max_concurrency = 5

# Additional git repositories to pull
# repos = [
#     "~/src/*/",
#     "~/.config/something"
# ]

# Don't pull the predefined git repos
# pull_predefined = false

# Arguments to pass Git when pulling Repositories
# arguments = "--rebase --autostash"


[windows]
# Manually select Windows updates
# accept_all_updates = false

# Controls whether to automatically reboot the computer when updates are
# installed that request it. (default: "no", allowed values: "yes", "no", "ask")
# updates_auto_reboot = "yes"

# open_remotes_in_new_terminal = true

# wsl_update_pre_release = true

# wsl_update_use_web_download = true

# The default for winget_install_silently is true,
# this example turns off silent install.
# winget_install_silently = false

# Causes Topgrade to rename itself during the run to allow package managers
# to upgrade it. Use this only if you installed Topgrade by using a package
# manager such as Scoop or Cargo
# self_rename = true

# Use sudo to elevate privileges for the Windows Package Manager (winget)
# Only use this option if you want to run the Winget step in sudo-mode.
# Running winget in sudo-mode is generally not recommended, as not every
# package supports installing / upgrading in sudo-mode and it may cause issues
# with some packages or may even cause the Winget-step to fail.
# If any problems occur, please try running Topgrade without this option first
# before reporting an issue.
# (default: false)
# winget_use_sudo = true


[npm]
# Use sudo if the NPM directory isn't owned by the current user
# use_sudo = true


[yarn]
# Run `yarn global upgrade` with `sudo`
# use_sudo = true


[deno]
# Upgrade deno executable to the given version.
# version = "stable"


[vim]
# For `vim-plug`, execute `PlugUpdate!` instead of `PlugUpdate`
# force_plug_update = true


[firmware]
# Offer to update firmware; if false just check for and display available updates
# upgrade = true


[vagrant]
# Vagrant directories
# directories = []

# power on vagrant boxes if needed
# power_on = true

# Always suspend vagrant boxes instead of powering off
# always_suspend = true


[flatpak]
# Use sudo for updating the system-wide installation
# use_sudo = true


[distrobox]
# use_root = false

# containers = ["archlinux-latest"]
[containers]
# Specify the containers to ignore while updating (Wildcard supported)
# ignored_containers = ["ghcr.io/rancher-sandbox/rancher-desktop/rdx-proxy:latest", "docker.io*"]
# Specify the runtime to use for containers (default: "docker", allowed values: "docker", "podman")
# runtime = "podman"

[lensfun]
# If disabled, Topgrade invokes `lensfun‑update‑data` without root privilege,
# then the update will be only available to you. Otherwise, `sudo` is required,
# and the update will be installed system-wide, i.e., available to all users.
# (default: false)
# use_sudo = false

[julia]
# If disabled, Topgrade invokes julia with the --startup-file=no CLI option.
#
# This may be desirable to avoid loading outdated packages with "using" directives
# in the startup file, which might cause the update run to fail.
# (default: true)
# startup_file = true

[zigup]
# Version strings passed to zigup.
# These may be pinned versions such as "0.13.0" or branches such as "master".
# Each one will be updated in its own zigup invocation.
# (default: ["master"])
# target_versions = ["master", "0.13.0"]

# Specifies the directory that the zig files will be installed to.
# If defined, passed with the --install-dir command line flag.
# If not defined, zigup will use its default behaviour.
# (default: not defined)
# install_dir = "~/.zig"

# Specifies the path of the symlink which will be set to point at the default compiler version.
# If defined, passed with the --path-link command line flag.
# If not defined, zigup will use its default behaviour.
# This is not meaningful if set_default is not enabled.
# (default: not defined)
# path_link = "~/.bin/zig"

# If enabled, run `zigup clean` after updating all versions.
# If enabled, each updated version above will be marked with `zigup keep`.
# (default: false)
# cleanup = false

[vscode]
# If this is set and is a non-empty string, it specifies the profile the
# extensions should be updated for.
# (default: this won't be set by default)
# profile = ""

[pixi]
# Show the release notes of the latest pixi release
# during the pixi step
# (default: false)
# include_release_notes = false

[doom]
# If this is set to true, the `--aot` flag is added to `doom upgrade`,
# which enables ahead-of-time native compilation of packages.
# (default: false)
# aot = true

[rustup]
# If set, updates only these channels.
# (default: [] (all channels))
# channels = ["stable"]