tix-tracker 0.12.0

//! The read-only planning-end projection (mission `burndown-scope-analytics-01M3C9J1`,
//! WP03 T016/T017).
//!
//! # What it answers, and what it never does
//!
//! Given one [`BurndownSeries`], the day the caller asks **as of**, and the planning
//! **end date** the caller supplies, [`project`] answers one question: at the
//! completion rate the recorded series actually shows, when does the recorded
//! remaining work reach zero — and does that fall on or before the planning end?
//!
//! Nothing here reads a clock ([`Projection::as_of`] is the caller's day), opens a
//! store, or writes anything: it is a forecast over an already-folded series, and
//! every number it publishes is one the series already carries or one the documented
//! formula derives from those numbers.
//!
//! # The documented formula (version [`PROJECTION_FORMULA_VERSION`])
//!
//! ```text
//! first            = the series' first covered day
//! elapsed          = calendar days from `first` to `as_of`
//! completed_delta  = completed(as_of) − completed(first)
//! observed_rate    = completed_delta / elapsed                 [work per day, in the series' unit]
//! days_needed      = ceil(remaining(as_of) / observed_rate)    [remaining > 0, observed_rate > 0]
//! projected        = as_of + days_needed
//! ```
//!
//! `days_needed` is evaluated as `ceil(remaining · elapsed / completed_delta)` in
//! integers, so the projected **date** never depends on a float rounding; the float
//! `observed_rate` is the same quotient, published for a reader.
//!
//! # The three states, and why a date is never invented (T017)
//!
//! | state | when |
//! |---|---|
//! | [`Projected`](ProjectionStatus::Projected) | the series answers for `as_of` and a completion date follows: the completions the record shows consumed the whole scope (already complete), or the observed rate is positive |
//! | [`Unknown`](ProjectionStatus::Unknown) | the series answers, but no rate that can reach zero appears: no completion was recorded inside the window, or the derived date is outside the calendar this build can express |
//! | [`InsufficientData`](ProjectionStatus::InsufficientData) | the record cannot answer at all: the series holds no point for `as_of`, the levels on it are unknown, the window holds no elapsed day, or the period recorded nothing at all — an empty level is not a finished one |
//!
//! Nothing is reconstructed to fill a gap: the levels, the rate and the remaining work
//! are all read off the series, and a state that cannot answer says so with one
//! [`ProjectionUnknown`](AnalyticsDiagnosticKind::ProjectionUnknown) finding and no
//! date. A closed series ([`crate::analytics::events::AnalyticsScope::snapshot_id`])
//! projects from the snapshot's own immutable points like any other — the projection
//! never rewrites them.
//!
//! # Determinism (C-007)
//!
//! The whole projection is a pure function of the series and the two dates, and the
//! only comparisons are over canonical `YYYY-MM-DD` strings (chronological for that
//! shape) — so two runs produce the same value, and a chart document carrying it is
//! byte-stable.

use time::{Date, Month};

use crate::error::{Result, TixError};
use crate::model::validate_date;

use super::diagnostics::{AnalyticsDiagnostic, AnalyticsDiagnosticKind};
use super::events::AnalyticsScope;
use super::series::{BurndownSeries, Mode};

/// The documented formula this projection implements.
///
/// A stable string rather than a number, for the same reason
/// [`crate::analytics::series::COUNT_FORMULA_VERSION`] is: a reader compares it for
/// equality, and a version *sequence* invites arithmetic on it that means nothing.
pub const PROJECTION_FORMULA_VERSION: &str = "burndown.projection.v1";

/// Whether the projection could answer, and with what (data-model §5 `status`).
#[derive(
    Debug, Clone, Copy, PartialEq, Eq, PartialOrd, Ord, Hash, serde::Serialize, serde::Deserialize,
)]
#[serde(rename_all = "snake_case")]
pub enum ProjectionStatus {
    /// A completion date follows from the recorded series.
    Projected,
    /// The series answers, but no rate that can reach zero appears, so no date is
    /// invented.
    Unknown,
    /// The record cannot answer: no level, or no elapsed observation, at `as_of`.
    InsufficientData,
}

impl ProjectionStatus {
    /// Every state, in the order a surface renders them.
    pub const ALL: [ProjectionStatus; 3] = [
        ProjectionStatus::Projected,
        ProjectionStatus::Unknown,
        ProjectionStatus::InsufficientData,
    ];

    /// The canonical spelling used in output and in payloads.
    pub const fn as_str(self) -> &'static str {
        match self {
            ProjectionStatus::Projected => "projected",
            ProjectionStatus::Unknown => "unknown",
            ProjectionStatus::InsufficientData => "insufficient_data",
        }
    }

    /// Parse a canonical spelling; `None` for anything outside the vocabulary.
    pub fn parse(raw: &str) -> Option<Self> {
        match raw.trim().to_ascii_lowercase().as_str() {
            "projected" => Some(ProjectionStatus::Projected),
            "unknown" => Some(ProjectionStatus::Unknown),
            "insufficient_data" => Some(ProjectionStatus::InsufficientData),
            _ => None,
        }
    }

    /// Whether a completion date was derived.
    pub const fn is_projected(self) -> bool {
        matches!(self, ProjectionStatus::Projected)
    }
}

impl std::fmt::Display for ProjectionStatus {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        f.write_str(self.as_str())
    }
}

/// The read-only end-date forecast over one series (data-model §5).
///
/// `observed_rate` and `remaining` are in the **series' own unit** — the counts of
/// count mode, or the converted units of estimate mode — which `mode`/`unit` carry
/// so a reader never sees a rate without the unit it is expressed in.
///
/// The type holds an [`AnalyticsScope`] (and therefore no serde derive, like
/// [`BurndownSeries`]): the chart document either derives these types at the
/// export layer or mirrors them there.
#[derive(Debug, Clone, PartialEq)]
pub struct Projection {
    /// The selected cycle/milestone, period and snapshot binding.
    pub scope: AnalyticsScope,
    /// How the series the projection was drawn from counts.
    pub mode: Mode,
    /// The unit the remaining work and the rate are expressed in, in estimate mode.
    pub unit: Option<String>,
    /// The forecast origin — the caller's day, never a clock.
    pub as_of: String,
    /// The planning end date the forecast is drawn against, as the caller supplied it.
    pub end_date: String,
    /// The remaining work the series carried to `as_of`, in the series' unit.
    pub remaining: Option<i64>,
    /// The observed completion rate, in the series' unit per calendar day.
    pub observed_rate: Option<f64>,
    /// The forecast completion date, when one follows.
    pub projected_completion: Option<String>,
    /// Whether the projected completion falls on or before `end_date`; `None` when
    /// no date was projected.
    pub meets_end_date: Option<bool>,
    /// Whether the projection could answer, and with what.
    pub status: ProjectionStatus,
    /// The documented formula this projection was drawn under.
    pub formula_version: String,
    /// Why no date was projected, when one was not.
    pub diagnostics: Vec<AnalyticsDiagnostic>,
}

impl Projection {
    /// Whether a completion date was derived.
    #[must_use]
    pub fn is_projected(&self) -> bool {
        self.status.is_projected()
    }

    /// The projected completion date, when one was derived.
    #[must_use]
    pub fn projected_completion(&self) -> Option<&str> {
        self.projected_completion.as_deref()
    }

    /// Settle on `status` and record why no date follows.
    fn unanswered(mut self, status: ProjectionStatus, message: String, remedy: &str) -> Self {
        self.status = status;
        self.diagnostics.push(
            AnalyticsDiagnostic::new(
                AnalyticsDiagnosticKind::ProjectionUnknown,
                self.scope.id.clone(),
                message,
            )
            .on(self.as_of.clone())
            .with_remedy(remedy),
        );
        self
    }

    /// Settle the projection on a derived completion date.
    fn project_on(mut self, completion: String) -> Self {
        self.meets_end_date = Some(completion <= self.end_date);
        self.projected_completion = Some(completion);
        self.status = ProjectionStatus::Projected;
        self
    }
}

/// Project `series` against the planning end date `end_date`, as of `as_of`.
///
/// Both dates are the **caller's** — this function reads no clock — and each must be
/// a canonical `YYYY-MM-DD` calendar date; anything else is refused here, in the same
/// words [`crate::analytics::events::Period::new`] refuses a malformed bound, rather
/// than silently dropped into a forecast.
///
/// The end date is not required to be after `as_of`: "we are past the planning end,
/// when will this finish?" is a question the projection answers like any other (with
/// `meets_end_date: Some(false)`).
pub fn project(series: &BurndownSeries, as_of: &str, end_date: &str) -> Result<Projection> {
    let as_of = canonical("as_of", as_of)?;
    let end_date = canonical("end_date", end_date)?;
    let mut projection = Projection {
        scope: series.scope.clone(),
        mode: series.mode,
        unit: series.unit.clone(),
        as_of: as_of.clone(),
        end_date,
        remaining: None,
        observed_rate: None,
        projected_completion: None,
        meets_end_date: None,
        status: ProjectionStatus::InsufficientData,
        formula_version: PROJECTION_FORMULA_VERSION.to_string(),
        diagnostics: Vec::new(),
    };

    let covered = series.points.first().zip(series.points.last()).map_or_else(
        || "no day at all".to_string(),
        |(first, last)| format!("{}..{}", first.date, last.date),
    );

    // (1) The origin must be a day the series answers for.
    let Some(index) = series.points.iter().position(|point| point.date == as_of) else {
        return Ok(projection.unanswered(
            ProjectionStatus::InsufficientData,
            format!(
                "the series covers {covered} and holds no point for {as_of}, so the record cannot \
                 answer a forecast for that day"
            ),
            "pass an `as-of` day the series covers, or widen the series' period",
        ));
    };
    let origin = &series.points[index];
    projection.remaining = origin.remaining;

    // (2) The levels the fold carried to the origin must be known.
    let Some(remaining) = origin.remaining else {
        return Ok(projection.unanswered(
            ProjectionStatus::InsufficientData,
            format!(
                "the remaining work on {as_of} is not known from the record (the period's levels \
                 are unanchored or a recorded completion outweighs its additions), so no rate can \
                 be read from it"
            ),
            "widen the series' period with an earlier `--from` so its levels are anchored, then \
             project again",
        ));
    };

    // (3) The observed window: the series' first covered day to the origin.
    let (Some(first), Some(completed_first), Some(completed_origin)) = (
        series.points.first(),
        series.points.first().and_then(|point| point.completed),
        origin.completed,
    ) else {
        return Ok(projection.unanswered(
            ProjectionStatus::InsufficientData,
            format!(
                "the recorded completions carried to {as_of} are not known, so no completion rate \
                 can be observed over the period"
            ),
            "widen the series' period with an earlier `--from` so the level's origin is in it",
        ));
    };
    if index == 0 {
        return Ok(projection.unanswered(
            ProjectionStatus::InsufficientData,
            format!(
                "{as_of} is the series' first covered day, so the period holds no elapsed day to \
                 observe a completion rate over"
            ),
            "ask for an origin later than the series' first covered day",
        ));
    }

    let delta = completed_origin - completed_first;
    projection.observed_rate = Some(rate_per_day(delta, index));

    if remaining == 0 {
        // Nothing remained at the origin. When the record also shows the completions
        // that consumed the scope, that is a fact and the projection states it — the
        // origin itself, not a forecast standing in for one. When the period recorded
        // nothing at all, its levels are *empty* rather than finished (`0 − 0`), and
        // calling that complete would be the zero-by-assumption C-005 forbids.
        if completed_origin > 0 {
            return Ok(projection.project_on(as_of));
        }
        return Ok(projection.unanswered(
            ProjectionStatus::InsufficientData,
            "the period records no scope addition and no completion for this scope, so its levels \
             are empty rather than finished and no completion date is drawn"
                .to_string(),
            "widen the series' period with an earlier `--from` so the scope's recorded work is in \
             it",
        ));
    }

    if delta <= 0 {
        return Ok(projection.unanswered(
            ProjectionStatus::Unknown,
            format!(
                "the period records no completion between {} and {as_of}, so there is no observed \
                 rate to project {remaining} remaining `{}` from and no completion date is \
                 invented",
                first.date,
                series.unit.as_deref().unwrap_or("unit")
            ),
            "record at least one completion inside the window before asking for a forecast",
        ));
    }

    let Some(days) = days_needed(remaining, index, delta) else {
        return Ok(projection.unanswered(
            ProjectionStatus::Unknown,
            format!(
                "the observed rate projects {remaining} remaining `{}` past the calendar this \
                 build can express, so no completion date is drawn",
                series.unit.as_deref().unwrap_or("unit")
            ),
            "project over a shorter remaining scope, or from an origin the rate can reach zero from",
        ));
    };
    let Some(completion) = shift(&as_of, days) else {
        return Ok(projection.unanswered(
            ProjectionStatus::Unknown,
            format!(
                "a completion {days} day(s) after {as_of} is outside the calendar this build can \
                 express, so no completion date is drawn"
            ),
            "project from a different origin",
        ));
    };
    Ok(projection.project_on(completion))
}

/// The observed completion rate: `delta` contributions over `elapsed` calendar days.
///
/// The projection's one division, and the only place a float appears — the data
/// model types `observed_rate` as a numeric, and "0.5 items a day" is a rate a reader
/// can act on. The **date** the rate produces is computed in integers ([`days_needed`])
/// precisely so this quotient's rounding can never move it, and the values it divides
/// are bounded by what a project's history records.
#[allow(clippy::cast_precision_loss)]
fn rate_per_day(delta: i64, elapsed: usize) -> f64 {
    delta as f64 / elapsed as f64
}

/// The whole days `remaining` needs at `delta` completions per `elapsed` days.
///
/// The documented `ceil(remaining / observed_rate)`, evaluated in integers, so the
/// projected date is exact rather than a float's neighbour. `None` when the quotient
/// does not fit an `i64` day count; whether the shift from that count is a day the
/// calendar can express is [`shift`]'s answer, and both resolve to the caller's
/// "outside the calendar" branch.
fn days_needed(remaining: i64, elapsed: usize, delta: i64) -> Option<i64> {
    let denominator = i128::from(delta);
    if denominator <= 0 {
        return None;
    }
    let numerator = i128::from(remaining) * i128::try_from(elapsed).ok()?;
    // Ceiling division in integers; both operands are positive here.
    let days = (numerator + denominator - 1) / denominator;
    i64::try_from(days).ok()
}

/// `date` shifted by `days` calendar days, or `None` past the expressible calendar.
///
/// The shift goes through Julian day numbers rather than a `time::Duration`: the
/// duration's own day constructor multiplies by 86,400 and **panics** on overflow
/// (`SignedDuration::days`'s `expect`), and it would be constructed before
/// `Date::checked_add` could reject the magnitude. The days this function is handed are
/// bounded only by the estimates a record can state over a window up to
/// [`crate::analytics::series::MAX_SERIES_DAYS`], so an unshiftable magnitude must come
/// back as `None` — the caller's "outside the calendar this build can express" answer —
/// rather than as a panic. The `i32` bound is above what the calendar itself holds
/// (`Date::MIN`..`Date::MAX` is ~±5.4e6 days around the anchor), so nothing a date
/// could have answered is refused here.
fn shift(date: &str, days: i64) -> Option<String> {
    let start = calendar(date)?;
    let julian = start
        .to_julian_day()
        .checked_add(i32::try_from(days).ok()?)?;
    Date::from_julian_day(julian).ok().map(render)
}

/// A canonical `YYYY-MM-DD` day as a `time` date.
fn calendar(date: &str) -> Option<Date> {
    let year: i32 = date.get(0..4)?.parse().ok()?;
    let month: u8 = date.get(5..7)?.parse().ok()?;
    let day: u8 = date.get(8..10)?.parse().ok()?;
    Date::from_calendar_date(year, Month::try_from(month).ok()?, day).ok()
}

/// A `time` date as the canonical `YYYY-MM-DD` string.
fn render(date: Date) -> String {
    format!(
        "{:04}-{:02}-{:02}",
        date.year(),
        u8::from(date.month()),
        date.day()
    )
}

/// A required date input, refused in the crate's `invalid_period` words when it is
/// not a canonical calendar day.
fn canonical(field: &str, raw: &str) -> Result<String> {
    let date = raw.trim();
    if !validate_date(date) {
        return Err(TixError::Config(format!(
            "invalid_period: `{field}` is `{raw}`, not a `YYYY-MM-DD` calendar date"
        )));
    }
    Ok(date.to_string())
}