tix-tracker 0.10.0

//! External tracker sync: orchestration for `tix export` / `tix import`,
//! the [`Tool`] selector, the [`CommandRunner`] spawn seam, and the pure
//! mapping / conflict-resolution rules.
//!
//! WP05 wires the CLI to `glab` (GitLab) and `linear-cli` (Linear) under
//! `contracts/external-tools.md`. Tokens are resolved through
//! [`token::resolve`] with env precedence, injected only as an env pair (never
//! argv), and every error/report surface scrubs the secret as `<token>`.
//!
//! The orchestration lives here so it is testable at module granularity by
//! pointing PATH at fake tool scripts; [`export`] / [`import`] are pure in the
//! sense that they take the store, tool, config and an output sink, and the
//! only externally visible side effects are local issue files, `tix.toml`,
//! the tool subprocesses, and what is written to `out`.
//!
//! ## One definition of "complete", and what this module's job actually is
//!
//! **A second local completion definition in this module is a C-004 defect.** There
//! used to be one: `remote_status_is_done(status) == (status == "closed" ||
//! status == "Done")`, a helper that looked like it decided whether an issue was
//! complete and in fact decided whether a *remote* state word was one of the two
//! this module happens to send. It had **no production callers** — WP02 removed the
//! last one — and its only remaining referrer was its own unit test, which is the
//! shape dead code takes when a test keeps it alive. Removed in WP07.
//!
//! What this module legitimately owns is the **translation**: the remote trackers
//! have a closed set of states (`opened`/`closed` for GitLab, a workflow-state label
//! for Linear), so something here has to say which remote word means closed and which
//! local column to send it as. That is a protocol concern and it is this module's
//! job.
//!
//! What it does **not** own is the meaning of *complete*. That is
//! [`crate::workflow::is_completed`] and nothing else — so [`local_to_remote_status`]
//! asks the service whether a local column is complete, and
//! [`remote_to_local_status`] picks the column the service calls complete via
//! [`completion_column`].
//!
//! The distinction matters because the two can disagree. A board whose `category_map`
//! puts `completed` on `shipped` while `done_column` is `done` has a completion
//! column that is *not* the one `done_column` names: comparing names exports
//! `shipped` as open and closes `done` instead, so the tracker and the board
//! disagree about the same issue in both directions.

use std::collections::HashMap;
use std::collections::HashSet;
use std::io::Write;

use crate::config::{BoardConfiguration, Config};
use crate::error::{Result, TixError};
use crate::model::{Issue, Status};
use crate::storage::Store;

pub mod beads;
pub mod glab;
pub mod linear;
pub mod token;

/// The supported external tracker, selected via `--target gitlab|linear`.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Tool {
    GitLab,
    Linear,
}

impl Tool {
    #[must_use]
    pub fn from_target(target: &str) -> Result<Tool> {
        match target {
            "gitlab" => Ok(Tool::GitLab),
            "linear" => Ok(Tool::Linear),
            other => Err(TixError::InvalidInput(format!(
                "unknown --target '{other}' — use gitlab or linear"
            ))),
        }
    }

    /// The token env var that wins over any `tix.toml` token — the tool's
    /// **primary** name, which is what the `tix.toml` warning and the injection
    /// tests name.
    #[must_use]
    pub fn token_var(self) -> &'static str {
        match self {
            Tool::GitLab => "GITLAB_TOKEN",
            Tool::Linear => "LINEAR_TOKEN",
        }
    }

    /// Every environment variable that can carry this tool's token, in
    /// precedence order.
    ///
    /// `token_var` is the primary name tix documents; the extras are the names
    /// the **tool itself** already reads, so a user who has the tracker
    /// configured does not have to export a second, tix-specific variable. The
    /// canonical `linear-cli` reads `LINEAR_API_KEY` (its help shows
    /// `printf '%s\n' "$LINEAR_API_KEY" | linear config set-key`), so that is
    /// accepted after tix's own `LINEAR_TOKEN`.
    #[must_use]
    pub fn token_vars(self) -> &'static [&'static str] {
        match self {
            Tool::GitLab => &["GITLAB_TOKEN"],
            Tool::Linear => &["LINEAR_TOKEN", "LINEAR_API_KEY"],
        }
    }

    /// The binary shelled out to.
    #[must_use]
    pub fn binary(self) -> &'static str {
        match self {
            Tool::GitLab => "glab",
            Tool::Linear => "linear-cli",
        }
    }

    #[must_use]
    pub fn as_str(self) -> &'static str {
        match self {
            Tool::GitLab => "gitlab",
            Tool::Linear => "linear",
        }
    }
}

impl std::fmt::Display for Tool {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        f.write_str(self.as_str())
    }
}

/// The captured result of a spawned external tool.
///
/// `ProcessRunner` waits synchronously on the child (never kills it), so a
/// blocking tool blocks the sync — the contract's supported "wait" model for
/// `glab`/`linear-cli`.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct CommandOutcome {
    pub success: bool,
    pub status: Option<i32>,
    pub stdout: String,
    pub stderr: String,
}

impl CommandOutcome {
    /// The human-readable output chosen for error reporting: stderr when the
    /// tool failed and produced any, otherwise stdout.
    #[must_use]
    pub fn text(&self) -> &str {
        if self.success {
            &self.stdout
        } else if !self.stderr.trim().is_empty() {
            &self.stderr
        } else {
            &self.stdout
        }
    }
}

/// Spawn seam: production uses [`ProcessRunner`]; tests inject a
/// `FakeRunner` that records argv/env without spawning anything.
pub trait CommandRunner: Send {
    fn run(
        &self,
        program: &str,
        args: &[String],
        env: &[(String, String)],
    ) -> Result<CommandOutcome>;

    /// Downcasting hook so tests can inspect recorded calls on a fake.
    fn as_any(&self) -> &dyn std::any::Any;
}

/// Production runner: `std::process::Command` with a synchronous output wait.
///
/// A missing binary surfaces as [`TixError::External`] with the contract's
/// exit-3 wording (`contracts/external-tools.md`: "missing binary ... exit 3").
pub struct ProcessRunner;

impl CommandRunner for ProcessRunner {
    fn run(
        &self,
        program: &str,
        args: &[String],
        env: &[(String, String)],
    ) -> Result<CommandOutcome> {
        use std::process::Command;
        let mut cmd = Command::new(program);
        cmd.args(args);
        for (key, value) in env {
            cmd.env(key, value);
        }
        let output = cmd.output().map_err(|e| {
            if e.kind() == std::io::ErrorKind::NotFound {
                TixError::External(not_found_message(program))
            } else {
                TixError::External(format!("`{program}` failed to start: {e}"))
            }
        })?;
        Ok(CommandOutcome {
            success: output.status.success(),
            status: output.status.code(),
            stdout: String::from_utf8_lossy(&output.stdout).into_owned(),
            stderr: String::from_utf8_lossy(&output.stderr).into_owned(),
        })
    }

    fn as_any(&self) -> &dyn std::any::Any {
        self
    }
}

/// Common surface both tracker adapters implement so the orchestration is
/// tool-agnostic.
///
/// `status` is the *remote* state/label already computed by the pure mapping
/// helpers (e.g. `closed`, `Done`, or the first work column). GitLab conveys
/// "done" via a separate close call ([`TrackerAdapter::mark_done`]); Linear
/// conveys it with `-s Done` ([`TrackerAdapter::done_via_status`]).
pub trait TrackerAdapter {
    fn tool(&self) -> Tool;

    /// Create a remote issue and return its remote id (GitLab `iid`, Linear
    /// `identifier`).
    fn create_issue(
        &mut self,
        title: &str,
        body: &str,
        labels: &[String],
        assignee: Option<&str>,
        priority: Option<&str>,
        status: &str,
    ) -> Result<String>;

    /// Update an existing remote issue in place.
    #[allow(clippy::too_many_arguments)]
    fn update_issue(
        &mut self,
        remote_ref: &str,
        title: &str,
        body: &str,
        labels: &[String],
        assignee: Option<&str>,
        priority: Option<&str>,
        status: &str,
    ) -> Result<()>;

    /// Convey "done" (GitLab: `issue close <id>`). Only invoked when
    /// `done_via_status` is false.
    fn mark_done(&mut self, remote_ref: &str) -> Result<()>;

    /// List open remote issues (the import source). Closed/done issues are
    /// excluded.
    fn list_open(&mut self) -> Result<Vec<RemoteIssue>>;

    /// Linear sets done through the status flag; GitLab needs a separate
    /// close call.
    fn done_via_status(&self) -> bool;

    /// Send the relationships this tracker can express, after the issue itself
    /// exists (WP07 T030/T031).
    ///
    /// **Required, not defaulted.** A default no-op would let a tracker be added
    /// that silently never syncs relationships — the failure mode is a local
    /// relation that appears to sync and does not, which is the same silent-loss
    /// shape as a dropped edge. Two implementors is a small price for making the
    /// omission a compile error.
    ///
    /// The relationships arrive already filtered by
    /// [`map_relation_to_remote`], so an adapter never decides representability:
    /// it sends what the shared seam says it can send, and reports the rest. A
    /// `blocks` edge reaches here; a `related` edge never does.
    fn set_relations(&mut self, remote_ref: &str, relations: &[MappedRelation]) -> Result<()>;

    /// Send the project associations this tracker can express, after the issue
    /// itself exists (WP08 T036).
    ///
    /// **Required, not defaulted**, for the same reason [`Self::set_relations`] is:
    /// a default no-op would let a tracker be added that silently never syncs
    /// project membership, which is the silent-loss shape C-005 forbids. Both
    /// adapters implement `PROJECT_WIRE_VERIFIED`'s answer, which is "nothing", and
    /// the signature is why a future tracker cannot answer with a different shape.
    ///
    /// The associations arrive already filtered by [`map_project_to_remote`], so an
    /// adapter never decides representability — and while `PROJECT_WIRE_VERIFIED` is
    /// empty it never receives a sendable value either, so both implementations
    /// return without spawning anything. A run that cannot express membership must
    /// send **nothing**: an empty membership flag that the tool interpreted as
    /// "clear it" would delete remote state on a run that had nothing to say, which
    /// is the same trap `set_relations` avoids by returning early on an empty set.
    fn set_projects(&mut self, remote_ref: &str, projects: &[MappedProject]) -> Result<()>;

    /// Send the epic references this tracker can express, after the issue itself
    /// exists (WP08, mission `epics-work-items-01M3BYW4`).
    ///
    /// **Required, not defaulted**, for the reason [`Self::set_relations`] and
    /// [`Self::set_projects`] give: a default no-op would let a tracker be added
    /// that silently never syncs an epic reference, which is the silent-loss shape
    /// C-007 forbids. The signature is why a future tracker cannot answer with a
    /// different shape.
    ///
    /// The references arrive already filtered by [`map_epic_to_remote`], so an
    /// adapter never decides representability. Both adapters implement
    /// `EPIC_WIRE_VERIFIED`'s answer, which is "nothing": neither `glab` nor
    /// `linear-cli` carries an epic membership list, so both return without spawning
    /// anything, and an empty set must spawn nothing (an empty flag the tool read as
    /// "clear it" would delete remote state on a run with nothing to say — the same
    /// trap `set_relations` avoids by returning early).
    fn set_epics(&mut self, remote_ref: &str, epics: &[MappedEpic]) -> Result<()>;
}

/// A remote issue parsed from the tracker's JSON list output.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct RemoteIssue {
    /// Remote id (GitLab `iid`, Linear `identifier`).
    pub id: String,
    pub title: String,
    pub description: String,
    pub labels: Vec<String>,
    /// Remote state (`closed` / `Done` / a column label, ...).
    pub state: String,
    /// ISO-8601 `updated_at`; `None` when the tool omitted it.
    pub updated_at: Option<String>,
    /// Best-effort single assignee (bare name, no `@`).
    pub assignee: Option<String>,
    /// The remote id of this issue's parent, when the remote reported one.
    ///
    /// A **remote** id, not a local number, because it is read from a remote
    /// payload and the two id spaces are not interchangeable. It is resolved to a
    /// local number by `local_parent_number` before anything is written, and
    /// `None` — rather than a guess — when it cannot be resolved.
    pub parent: Option<String>,
    /// The project references the remote reported for this issue (WP08).
    ///
    /// Read from the payload, in the order the payload listed them, and matched
    /// against the local registry by **id** before anything is written. An empty
    /// vector is the answer for a payload that reported none, which is every
    /// GitLab payload today: nothing in this build ever *sends* a membership, so
    /// this is only ever what the remote side already said.
    pub projects: Vec<RemoteProject>,
    /// The epic references the remote reported for this issue (WP08, mission
    /// `epics-work-items-01M3BYW4`).
    ///
    /// Read from the payload, in the order the payload listed them, and matched
    /// against the local registry by **id** before anything is written. An empty
    /// vector is the answer for a payload that reported none — and for both trackers
    /// today nothing in this build ever *sends* one (`EPIC_WIRE_VERIFIED` is empty),
    /// so this is only ever what the remote already said.
    pub epics: Vec<RemoteEpic>,
}

/// What one export or import run did, and what it could not do.
///
/// Returned rather than only written to the caller's `Write`, so a caller can
/// surface the diagnostics without scraping its own output — and so the count and
/// the diagnostics cannot disagree. Both entry points had `Result<usize>`; a count
/// alone cannot express "three issues synced, one relationship could not be".
#[derive(Debug, Clone, Default, PartialEq, Eq)]
pub struct SyncReport {
    /// Issues created, updated, or overwritten.
    pub handled: usize,
    /// Local data the remote could not represent — relationships, parent
    /// references, health values, project associations, and epic references — in
    /// encounter order.
    pub diagnostics: Vec<RemoteMappingDiagnostic>,
    /// Items whose **status** the transition policy refused (WP07 T031).
    ///
    /// Counted separately from `handled` because an import can do both: an issue
    /// whose title and body imported fine while its status was refused still counts
    /// as handled — the file was written — and also as skipped, because a column did
    /// not move. A single number cannot express that, and the report line it backs
    /// (`overwrote … without its status`) is the one a user has to be able to find.
    pub skipped: usize,
}

impl SyncReport {
    /// Record one unrepresentable relationship: keep the diagnostic for the
    /// caller, and say so on the human-facing stream too.
    fn note(&mut self, mapped: MappedRelation, out: &mut dyn Write) -> std::io::Result<()> {
        if let MappedRelation::Unsupported(diagnostic) = mapped {
            writeln!(out, "{diagnostic}")?;
            self.diagnostics.push(diagnostic);
        }
        Ok(())
    }

    /// The same, for a **parent** reference.
    ///
    /// Its own method rather than coercing a `MappedParent` into a
    /// `MappedRelation`: a parent is not a relationship, and the first cut did
    /// exactly that with an empty `field` and an empty `value` on the remote arm
    /// — which reads as though something were being sent when nothing is. The
    /// coercion compiled, produced the right output, and was wrong in a way only
    /// reading the type would have caught.
    fn note_parent(&mut self, mapped: MappedParent, out: &mut dyn Write) -> std::io::Result<()> {
        if let MappedParent::Unsupported(diagnostic) = mapped {
            writeln!(out, "{diagnostic}")?;
            self.diagnostics.push(diagnostic);
        }
        Ok(())
    }

    /// The same, for a **project association**.
    ///
    /// Its own method for the reason [`SyncReport::note_parent`] gives: a project
    /// membership is not a relationship, and coercing a `MappedProject` into a
    /// `MappedRelation` would put a project id where a relationship id belongs.
    /// The three methods share the diagnostic type and the count, which is the
    /// vocabulary that matters.
    fn note_project(&mut self, mapped: MappedProject, out: &mut dyn Write) -> std::io::Result<()> {
        if let MappedProject::Unsupported(diagnostic) = mapped {
            writeln!(out, "{diagnostic}")?;
            self.diagnostics.push(diagnostic);
        }
        Ok(())
    }

    /// The same, for an **epic reference** (WP08, mission
    /// `epics-work-items-01M3BYW4`).
    ///
    /// Its own method for the reason [`SyncReport::note_project`] gives: an epic
    /// reference is not a relationship, and coercing a `MappedEpic` into a
    /// `MappedRelation` would put an epic id where a relationship id belongs. The
    /// four methods share the diagnostic type and the count, which is the vocabulary
    /// that matters.
    fn note_epic(&mut self, mapped: MappedEpic, out: &mut dyn Write) -> std::io::Result<()> {
        if let MappedEpic::Unsupported(diagnostic) = mapped {
            writeln!(out, "{diagnostic}")?;
            self.diagnostics.push(diagnostic);
        }
        Ok(())
    }
}

/// The record emitted when a remote tracker cannot hold a piece of local data —
/// a relation (FR-005, C-005, `data-model.md` §6), a parent reference, a health
/// value, a project association (WP08, mission `first-class-projects-01M3BYBW`),
/// or an epic reference (WP08, mission `epics-work-items-01M3BYW4`).
///
/// The four fields are fixed by the data model. `field` is the important one: it
/// is what makes the diagnostic actionable rather than a shrug, and
/// `data-model.md` §6 requires it for exactly that reason — "so the message can
/// name it".
///
/// One type for all of them because the vocabulary matters more than the noun: a
/// reader of `tix export` output learns one shape ("tool: field cannot represent
/// this local data (subject) — reason") and does not have to recognise which kind
/// of local data each line is about. The **subject** in `relation_id` is whatever
/// the diagnostic is about — a relationship id, an `issue->parent` pair, a health
/// scope, an `issue->project` pair, or an `issue->epic` pair.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct RemoteMappingDiagnostic {
    /// The local item the diagnostic is about: a relationship id, an
    /// `issue->parent` pair, a health scope, or an `issue->project` pair.
    pub relation_id: String,
    /// The specific unsupported remote field or relation name.
    pub field: String,
    /// Which adapter produced the diagnostic.
    pub tool: Tool,
    /// Human-readable text, safe for CLI output, the TUI, and lint.
    pub message: String,
}

impl std::fmt::Display for RemoteMappingDiagnostic {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        // "this local data", not "this relationship": the type now carries project
        // associations and health values too, and a line that called an association
        // a relationship would send the reader looking for an edge that is not there.
        write!(
            f,
            "{}: {} cannot represent this local data ({}) — {}",
            self.tool.as_str(),
            self.field,
            self.relation_id,
            self.message
        )
    }
}

/// The outcome of mapping one local relationship for one tracker: either a
/// remote representation, or a diagnostic naming why there is none.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MappedRelation {
    /// The remote representation to send: the relation `field` (the remote
    /// relation kind, e.g. `blocks`) and the `value` the adapter needs. For a
    /// relation verb taking two endpoints (Linear's `relations add`) the `value`
    /// is the **target's remote identifier** (`ENG-42`); a tracker whose verb
    /// carries the target inside a field renders its own value there.
    Remote { field: String, value: String },
    /// The tracker cannot express this relation. The **local** relation is
    /// untouched — C-005 is that a relation the remote cannot hold still survives.
    Unsupported(RemoteMappingDiagnostic),
}

/// The remote fields each tracker can express for a typed relation, and the one it
/// maps every blocking edge onto.
///
/// This is the whole of the representability decision, and it is deliberately a
/// table keyed on `(Tool, RelationKind)` rather than logic spread across the two
/// adapters. Two consequences worth stating:
///
/// - **It is derived from what the adapters can actually send**, not from a guess
///   about their APIs. `linear-cli relations add -r <kind> <FROM> <TO>` is the only
///   relation verb either CLI exposes, so `blocks` maps for Linear and nothing else
///   does; `glab` exposes no relation verb at all (see `RELATION_CLI_ABSENT`).
/// - **`blocks` maps; `related`, `duplicates`, and `blocked_by` do not.** Both
///   trackers' issue-update CLIs carry a title, body, labels, assignee, and state —
///   and no field for "this issue is related to that one". Guessing otherwise
///   would mean writing a title into a field, which is not a mapping.
///
/// `blocked_by` is the inverse of `blocks`, not a third thing, so it is reported
/// against the same remote field: naming `blocking` for it would be true but would
/// send the reader looking for a relation the tracker does not have.
///
/// ## Linear is wire-verified; GitLab is verified to have no command at all
///
/// The mapping knows what each tracker's *model* can express — GitLab and Linear
/// both have blocking relations in their APIs — and the adapters drive a **CLI**,
/// so what matters is whether the CLI exposes a verb.
///
/// **Linear's does.** `linear-cli` 0.3.28 (nesszer/linear-cli, the
/// `cargo:linear-cli` crate) has `relations add --relation
/// <blocks|blocked-by|related|duplicate> <FROM> <TO>`, checked against the
/// installed binary on 2026-10-09. Four shapes parse — they fail only with
/// `No workspace selected` (exit 1, no workspace configured here):
/// `relations add -r blocks ENG-1 ENG-2`, `issues create "T" -t ENG -d D -p 2 -s
/// Todo -o json`, `issues update ENG-1 -T T -d D -s Done -o json`, and
/// `issues list -t ENG -s Todo -o json`; and two clap errors confirm the shape —
/// `linear-cli issue create "T"` (exit 2, `unrecognized subcommand 'issue'`) and
/// `linear-cli issues create --title T` (exit 2, `unexpected argument
/// '--title'`). The API path itself is unverified (no workspace), so the
/// adapter is checked at the grammar level and end to end against the fake.
///
/// Sending an unverified command line is not a conservative default; it is a
/// production failure with a confusing message. So the seam maps, and an adapter
/// sends only what a verified verb carries; **GitLab remains on the separate,
/// permanent `RELATION_CLI_ABSENT` list** below — the two answers must not blur.
///
/// The follow-up this closes: verify the verb against the real CLI, add the tool
/// to this list, and implement its `set_relations` ([`Tool::Linear`] does).
const RELATION_WIRE_VERIFIED: &[Tool] = &[Tool::Linear];

/// Tools whose CLI is **verified to expose no relation command at all**.
///
/// This is a *different, permanent* answer from "not yet verified", and the two
/// must not share wording. A reader told "the verb is not verified" will reasonably
/// wait for (or go looking for) the missing command; a reader told the CLI has no
/// such command can stop.
///
/// `glab` 1.119.0, checked against the installed binary (tix #1354):
/// `glab issue update --help` lists no `--blocking` (or any relation) flag, and
/// `glab issue` has no relation/`link` subcommand. GitLab's *model* has issue links
/// and the REST API exposes them, but the CLI this adapter drives does not.
const RELATION_CLI_ABSENT: &[Tool] = &[Tool::GitLab];

// ---------------------------------------------------------------------------
// WP08 — the parent reference across a sync round trip
// ---------------------------------------------------------------------------

/// The CLI verbs that would carry a parent reference, per adapter.
///
/// **Empty: no adapter has a verified parent verb.** Both trackers' *models* have
/// a hierarchy — GitLab has epics and child issues, Linear has parent issues — but
/// the adapters drive a CLI, and whether `glab issue create --parent` or
/// `linear-cli issues create --parent` exists is a claim about a program this
/// repository cannot run. (Linear's `relations add` is verified for *relations*
/// and is on `RELATION_WIRE_VERIFIED`; that is a different verb and says nothing
/// about a parent, and the fake in `tests/bin/` accepts no parent flag.)
///
/// So the seam maps, and nothing is sent until a verb is verified. What *does*
/// work today — and is what the round trip covers — is that the reference
/// survives: the local parent is retained, the mapping is reported, and an import
/// restores a parent that came from the remote. Flipping a tool on here is a
/// one-line change plus its adapter implementation, once the verb is confirmed by
/// hand.
const PARENT_WIRE_VERIFIED: &[Tool] = &[];

/// The remote field each adapter would carry a parent in, if its verb existed.
///
/// Present so the diagnostic can *name* the thing that is missing, rather than
/// saying only that something is. A reader told "GitLab cannot express this" will
/// not go looking for the flag.
const GITLAB_PARENT_FIELD: &str = "parent";
const LINEAR_PARENT_FIELD: &str = "parent";

/// What one parent reference maps to on the wire.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MappedParent {
    /// The remote value to send, as a field/value pair like a relation.
    Remote { field: String, value: String },
    /// The adapter cannot carry it. The **local** reference is untouched, which is
    /// the same contract the relationship mapper follows (C-005): a reference the
    /// remote cannot hold still survives here.
    Unsupported(RemoteMappingDiagnostic),
}

/// Map one local parent reference to its remote representation, or say why not.
///
/// Pure: no adapter, no I/O, no configuration, and shared by both trackers so a
/// future one cannot be added with a divergent contract (T033).
#[must_use]
pub fn map_parent_to_remote(tool: Tool, issue_number: u32, parent: Option<u32>) -> MappedParent {
    let Some(parent) = parent else {
        // No reference is not a mapping problem. Reporting it would put a
        // diagnostic on every parentless issue in the repository, which is every
        // diagnostic being ignored.
        return MappedParent::Remote {
            field: parent_field(tool).to_string(),
            value: String::new(),
        };
    };
    let field = parent_field(tool);
    if PARENT_WIRE_VERIFIED.contains(&tool) {
        return MappedParent::Remote {
            field: field.to_string(),
            value: format!("#{parent}"),
        };
    }
    MappedParent::Unsupported(RemoteMappingDiagnostic {
        relation_id: format!("{issue_number}->{parent}"),
        field: field.to_string(),
        tool,
        message: format!(
            "#{issue_number}'s parent #{parent} is expressible in {}'s model as \
             `{field}`, but the CLI verb that would carry it is not verified, so \
             nothing is sent; the local reference is kept",
            tool.as_str()
        ),
    })
}

/// The field an adapter would carry a parent in.
fn parent_field(tool: Tool) -> &'static str {
    match tool {
        Tool::GitLab => GITLAB_PARENT_FIELD,
        Tool::Linear => LINEAR_PARENT_FIELD,
    }
}

// ---------------------------------------------------------------------------
// WP08 (mission first-class-projects-01M3BYBW) — project associations across a
// sync round trip
// ---------------------------------------------------------------------------
//
// ## The two directions are not symmetric, and each says so
//
// **Outward: nothing leaves the machine, ever.** GitLab's and Linear's *models*
// both know what a project is; the CLIs these adapters drive do not. `glab`
// already passes the one project an issue lives in (`--project <path>`) on every
// call and exposes no membership field at all, and Linear's issue carries a
// single `project` — so neither can hold the *list* this mission's C-003
// requires. Multi-membership is the intake's named risk, and the contract's
// answer for it is C-005, not a guess: every association diagnoses, and the local
// association list is untouched. Sending one member of a list would be a silent
// drop with extra steps.
//
// **Inward: a payload that reports associations is honoured.** The read direction
// is deliberately *not* gated the way the relation mapper's is, and the reason is
// not convenience. `map_relation_from_remote` must refuse an unrecognised field
// because turning remote text into a local edge can invent a relationship no
// export ever made. A project id cannot: it is matched against the local
// **registry** before anything is written, and an id the registry does not know
// is refused with a diagnostic rather than written (C-005). So the worst an
// invented id can produce is a named diagnostic, never local data. Reading a
// field a payload reported is also not the same claim as sending one — the same
// distinction `GlabIssue::parent` already draws.
//
// This is what makes the round trip non-vacuous: the export says what cannot
// leave, the import applies what came back through the project **service**, and
// the association list is byte-stable either way (NFR-002).

/// A project reference a remote reported on one issue.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct RemoteProject {
    /// The remote's project identity. It is the **only** thing an import matches
    /// on (C-002): an id is allocated once and never changes, so a remote that
    /// renames a project still names the same one.
    pub id: String,
    /// The remote's display name for the project, when it sent one.
    ///
    /// Carried for the diagnostics — a reader recognises "the remote calls it
    /// *Platform hardening*" — and **never** matched on. The local display name
    /// stays the registry's (C-002), so a remote rename cannot change it, and it
    /// is the only remote text in a diagnostic, which is why that diagnostic is
    /// scrubbed.
    pub name: Option<String>,
}

/// Parse the project references one remote issue reported.
///
/// **Pure and total**, in the shape [`crate::sync::mod`'s parent parser] is: an
/// unrecognised payload yields no references — which the import then reports
/// nothing about — rather than a deserialisation failure that aborts the whole
/// list. Accepted, for both trackers, because the field's exact shape is a claim
/// about a program this repository cannot run:
///
/// - an array of ids (`"projects": ["p-1", …]`) or of objects;
/// - a single id, or a single object (`"project": {"id": …}`);
/// - an object's id under `id`, `identifier`, `key`, or `project_id`, as a
///   string or a number (`iid`-style numeric ids are real on the wire);
/// - its name under `name`, `title`, or `display_name`, as a string.
///
/// **Entry order is preserved**, which is what keeps a round trip byte-stable
/// (NFR-002): reordering here would reorder the local list.
///
/// An entry with a name but no id is **kept** with an empty id, so the import can
/// report it by name instead of dropping it in silence; an entry with neither is
/// not a reference at all and yields nothing.
#[must_use]
pub fn remote_projects(value: Option<&serde_json::Value>) -> Vec<RemoteProject> {
    fn id_of(value: &serde_json::Value) -> String {
        match value {
            serde_json::Value::String(s) => s.clone(),
            serde_json::Value::Number(n) => n.to_string(),
            _ => String::new(),
        }
    }
    fn one(value: &serde_json::Value) -> Option<RemoteProject> {
        match value {
            serde_json::Value::String(_) | serde_json::Value::Number(_) => Some(RemoteProject {
                id: id_of(value),
                name: None,
            }),
            serde_json::Value::Object(map) => {
                let id = ["id", "identifier", "key", "project_id"]
                    .iter()
                    .find_map(|key| map.get(*key))
                    .map(id_of)
                    .unwrap_or_default();
                let name = ["name", "title", "display_name"]
                    .iter()
                    .find_map(|key| map.get(*key))
                    .and_then(serde_json::Value::as_str)
                    .map(str::to_string);
                if id.trim().is_empty() && name.is_none() {
                    return None;
                }
                Some(RemoteProject { id, name })
            }
            _ => None,
        }
    }
    let Some(value) = value else {
        return Vec::new();
    };
    match value {
        serde_json::Value::Array(items) => items.iter().filter_map(one).collect(),
        other => one(other).into_iter().collect(),
    }
}

/// The remote field each adapter would carry an issue's project associations in.
///
/// The two differ because the trackers' models differ, and the diagnostic names
/// the field the reader should stop looking for:
///
/// - **GitLab** — `projects`. An issue JSON carries the one project that owns it;
///   the field a *membership list* would need is `projects`, which no `glab`
///   command exposes.
/// - **Linear** — `project`. Its issue carries exactly one project, so the field
///   that exists is named and the list it cannot hold is what diagnoses.
const GITLAB_PROJECT_FIELD: &str = "projects";
const LINEAR_PROJECT_FIELD: &str = "project";

/// The field an adapter would carry project associations in.
fn project_field(tool: Tool) -> &'static str {
    match tool {
        Tool::GitLab => GITLAB_PROJECT_FIELD,
        Tool::Linear => LINEAR_PROJECT_FIELD,
    }
}

/// Tools verified to drive project **membership** from their CLI.
///
/// **Empty, and not because the verb is merely unverified.** The relation and
/// parent tables are empty pending a verb confirmation; this one is empty because
/// neither CLI has a verb to confirm: `glab issue update --help` (1.119.0) lists
/// `--project` only as *which project owns the issue*, and Linear's issue carries
/// one `project` with no list form. So an issue with three projects cannot be
/// expressed as three of anything, and C-003's multi-membership — the intake's
/// named risk — is what makes this terminal rather than pending.
///
/// The table still exists rather than a bare `unsupported` constant so the seam
/// has the same shape as the other three, and so a future tracker that *does*
/// model membership in its CLI is a one-line addition plus its `set_projects`.
const PROJECT_WIRE_VERIFIED: &[Tool] = &[];

/// What one local project association maps to on the wire.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MappedProject {
    /// The remote value to send, as a field/value pair like a relation.
    Remote { field: String, value: String },
    /// The adapter cannot carry it. The **local** association is untouched — C-005
    /// is that a membership the remote cannot hold still survives.
    Unsupported(RemoteMappingDiagnostic),
}

/// Map one local project association to its remote representation, or say why not.
///
/// Pure: no adapter, no I/O, no configuration. Both trackers share it, so a future
/// one cannot be added with a divergent contract — and the representability
/// decision lives in exactly one place instead of once per adapter.
///
/// `issue_number` appears in the message because the diagnostic has to be
/// actionable: the association list can be long, and "project `p-3` cannot be
/// sent" without the issue is a shrug.
#[must_use]
pub fn map_project_to_remote(tool: Tool, issue_number: u32, project_id: &str) -> MappedProject {
    let field = project_field(tool);
    let id = project_id.trim();
    if id.is_empty() {
        // Not a representability question: there is nothing to send, and an empty
        // entry in the list is a repair job rather than a remote capability gap.
        return MappedProject::Unsupported(RemoteMappingDiagnostic {
            relation_id: format!("{issue_number}->"),
            field: field.to_string(),
            tool,
            message: format!(
                "issue #{issue_number} carries a project association with no id, so there \
                 is nothing to send; the entry is kept locally — dissociating the empty \
                 reference, or editing the issue's project list, clears it"
            ),
        });
    }
    if PROJECT_WIRE_VERIFIED.contains(&tool) {
        return MappedProject::Remote {
            field: field.to_string(),
            value: id.to_string(),
        };
    }
    MappedProject::Unsupported(RemoteMappingDiagnostic {
        relation_id: format!("{issue_number}->{id}"),
        field: field.to_string(),
        tool,
        message: format!(
            "#{issue_number}'s membership of project `{id}` has no {} field to travel in \
             — {} — so nothing is sent and the local association is kept",
            tool.as_str(),
            project_absence_reason(tool)
        ),
    })
}

/// Why a tracker's CLI cannot carry a project membership, per tool.
///
/// A **permanent** claim about the CLI the adapter drives, not "not yet
/// verified", and the wording says so for the same reason `RELATION_CLI_ABSENT`
/// does: a reader told "the verb is unverified" will wait for it, and there is
/// nothing to wait for. The two reasons differ, so the message does.
fn project_absence_reason(tool: Tool) -> &'static str {
    match tool {
        Tool::GitLab => {
            "`glab` names one owning project (`--project`) and exposes no membership field"
        }
        Tool::Linear => {
            "Linear's issue carries one `project` and no list, so a second \
                         membership has nowhere to go"
        }
    }
}

/// Map one remote project reference back onto a local association id, or say why
/// not.
///
/// The reverse value is **local-shaped**, like [`map_relation_from_remote`]'s: the
/// frontmatter key the association lives under ([`crate::projects::PROJECTS_KEY`])
/// and the id, not a copy of the tool's field name — echoing the field back would
/// make the same association read differently per tracker, which is the opposite
/// of a shared seam.
///
/// Not gated on [`PROJECT_WIRE_VERIFIED`], and the module header records why: an
/// id is validated against the local registry before anything is written, so this
/// direction cannot invent local data the way an unverified relation field could.
#[must_use]
pub fn map_project_from_remote(tool: Tool, remote: &RemoteProject) -> MappedProject {
    let id = remote.id.trim();
    if id.is_empty() {
        return MappedProject::Unsupported(RemoteMappingDiagnostic {
            relation_id: remote.name.clone().unwrap_or_default(),
            field: project_field(tool).to_string(),
            tool,
            message: format!(
                "the remote reported a project it named `{}` but gave no id, and an id is \
                 the only thing a local association can match on; nothing was associated \
                 and the local list is unchanged",
                remote.name.as_deref().unwrap_or("")
            ),
        });
    }
    MappedProject::Remote {
        field: crate::projects::PROJECTS_KEY.to_string(),
        value: id.to_string(),
    }
}

/// Redact the resolved secret from a diagnostic's message.
///
/// The diagnostics this module builds itself are made of local ids and field
/// names. The **import** builds four — a reference it cannot read, a project the
/// registry does not declare, an epic the registry does not declare, and a service
/// refusal — and the first three quote the name a remote payload reported. Remote
/// output is the one input that can carry a credential, which is why the import's
/// diagnostics go through here, using the same [`scrub_secret`] the adapters use on
/// their errors.
fn scrub_diagnostic(diagnostic: &mut RemoteMappingDiagnostic, secret: Option<&str>) {
    if let Some(secret) = secret {
        diagnostic.message = scrub_secret(&diagnostic.message, secret);
        diagnostic.relation_id = scrub_secret(&diagnostic.relation_id, secret);
    }
}

// ---------------------------------------------------------------------------
// WP08 (mission epics-work-items-01M3BYW4) — epic references across a sync
// round trip
// ---------------------------------------------------------------------------
//
// ## What the adapters can actually express
//
// **Outward: nothing leaves the machine, and that is the derived answer, not a
// placeholder.** Research R7 states GitLab's adapter has no epic concept and the
// `grep` confirms it: neither `glab` nor `linear-cli` carries an epic membership
// list. `glab`'s issue JSON names at most one epic (`epic_iid`, which this adapter
// already reads as the issue's single parent) and exposes no flag to send one;
// Linear has no epic level at all. Because the mission allows **several** epics per
// issue (C-003), an adapter that sent one member of a list would be a silent drop
// with extra steps — which C-007 forbids outright. So every reference diagnoses and
// the local list is untouched.
//
// **Inward: a payload that reports epic ids is honoured.** Like the project seam,
// the read direction is deliberately *not* gated: the id is matched against the
// local **registry** before anything is written, so the worst an invented id can
// produce is a named diagnostic, never local data (C-007).
//
// This is what makes the round trip non-vacuous: the export says what cannot leave,
// the import applies what came back through the epic **service**
// ([`Store::reference_epic`], the same path `tix edit --add-epic` takes), and the
// reference list is byte-stable either way (NFR-002).

/// An epic reference a remote reported on one issue.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct RemoteEpic {
    /// The remote's epic identity. It is the **only** thing an import matches on
    /// (C-003): an epic id is allocated once and never changes, so a remote that
    /// renames an epic still names the same one.
    pub id: String,
    /// The remote's display name for the epic, when it sent one.
    ///
    /// Carried for the diagnostics — a reader recognises "the remote calls it
    /// *Sync hardening*" — and **never** matched on. The local display name stays
    /// the registry's (C-003), so a remote rename cannot change it; it is the only
    /// remote text in a diagnostic, which is why that diagnostic is scrubbed.
    pub name: Option<String>,
}

/// Parse the epic references one remote issue reported.
///
/// **Pure and total**, in the shape [`remote_projects`] is: an unrecognised payload
/// yields no references — which the import then reports nothing about — rather than
/// a deserialisation failure that aborts the whole list. Accepted, for both
/// trackers, because the field's exact shape is a claim about a program this
/// repository cannot run:
///
/// - an array of ids (`"epics": ["e-1", …]`) or of objects;
/// - a single id, or a single object (`"epic": {"id": …}`);
/// - an object's id under `id`, `identifier`, `key`, or `epic_id`, as a string or a
///   number (numeric ids are real on the wire);
/// - its name under `name`, `title`, or `display_name`, as a string.
///
/// **Entry order is preserved**, which is what keeps a round trip byte-stable
/// (NFR-002): reordering here would reorder the local list. An entry with a name
/// but no id is **kept** with an empty id, so the import can report it by name
/// instead of dropping it in silence; an entry with neither is not a reference at
/// all and yields nothing.
#[must_use]
pub fn remote_epics(value: Option<&serde_json::Value>) -> Vec<RemoteEpic> {
    fn id_of(value: &serde_json::Value) -> String {
        match value {
            serde_json::Value::String(s) => s.clone(),
            serde_json::Value::Number(n) => n.to_string(),
            _ => String::new(),
        }
    }
    fn one(value: &serde_json::Value) -> Option<RemoteEpic> {
        match value {
            serde_json::Value::String(_) | serde_json::Value::Number(_) => Some(RemoteEpic {
                id: id_of(value),
                name: None,
            }),
            serde_json::Value::Object(map) => {
                let id = ["id", "identifier", "key", "epic_id"]
                    .iter()
                    .find_map(|key| map.get(*key))
                    .map(id_of)
                    .unwrap_or_default();
                let name = ["name", "title", "display_name"]
                    .iter()
                    .find_map(|key| map.get(*key))
                    .and_then(serde_json::Value::as_str)
                    .map(str::to_string);
                if id.trim().is_empty() && name.is_none() {
                    return None;
                }
                Some(RemoteEpic { id, name })
            }
            _ => None,
        }
    }
    let Some(value) = value else {
        return Vec::new();
    };
    match value {
        serde_json::Value::Array(items) => items.iter().filter_map(one).collect(),
        other => one(other).into_iter().collect(),
    }
}

/// The remote field an adapter would carry an issue's epic references in.
///
/// **One constant, not a per-tool table.** Unlike a project association — where
/// the two models genuinely name different fields (`projects` for GitLab's owning
/// project vs Linear's single `project`) — both trackers would name an epic
/// membership list `epics`, so a per-tool indirection would carry no information.
/// The per-tool difference lives in [`epic_absence_reason`], which is where it
/// actually is: `glab` names at most one epic per issue (`epic_iid`), while Linear
/// has no epic level at all.
const EPIC_FIELD: &str = "epics";

/// Tools verified to drive an epic **membership** from their CLI.
///
/// **Empty, and derived from the adapters rather than assumed.** `glab`'s issue
/// carries at most one epic (`epic_iid`) and exposes no flag to set it or to hold a
/// list; Linear has no epic level. So an issue in three epics cannot be expressed as
/// three of anything, and C-003's multi-membership is what makes this terminal
/// rather than pending — the same reasoning `PROJECT_WIRE_VERIFIED` records.
///
/// The table still exists rather than a bare `unsupported` constant so the seam has
/// the same shape as the other three, and so a future tracker that *does* model an
/// epic list in its CLI is a one-line addition plus its `set_epics`.
const EPIC_WIRE_VERIFIED: &[Tool] = &[];

/// What one local epic reference maps to on the wire.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MappedEpic {
    /// The remote value to send, as a field/value pair like a relation.
    Remote { field: String, value: String },
    /// The adapter cannot carry it. The **local** reference is untouched — C-007 is
    /// that a reference the remote cannot hold still survives.
    Unsupported(RemoteMappingDiagnostic),
}

/// Map one local epic reference to its remote representation, or say why not.
///
/// Pure: no adapter, no I/O, no configuration. Both trackers share it, so a future
/// one cannot be added with a divergent contract — and the representability decision
/// lives in exactly one place instead of once per adapter.
///
/// `issue_number` appears in the message because the diagnostic has to be
/// actionable: the reference list can be long, and "epic `e-3` cannot be sent"
/// without the issue is a shrug.
#[must_use]
pub fn map_epic_to_remote(tool: Tool, issue_number: u32, epic_id: &str) -> MappedEpic {
    let field = EPIC_FIELD;
    let id = epic_id.trim();
    if id.is_empty() {
        // Not a representability question: there is nothing to send, and an empty
        // entry in the list is a repair job rather than a remote capability gap.
        return MappedEpic::Unsupported(RemoteMappingDiagnostic {
            relation_id: format!("{issue_number}->"),
            field: field.to_string(),
            tool,
            message: format!(
                "issue #{issue_number} carries an epic reference with no id, so there is \
                 nothing to send; the entry is kept locally — dereferencing the empty \
                 reference, or editing the issue's epic list, clears it"
            ),
        });
    }
    if EPIC_WIRE_VERIFIED.contains(&tool) {
        return MappedEpic::Remote {
            field: field.to_string(),
            value: id.to_string(),
        };
    }
    MappedEpic::Unsupported(RemoteMappingDiagnostic {
        relation_id: format!("{issue_number}->{id}"),
        field: field.to_string(),
        tool,
        message: format!(
            "#{issue_number}'s reference to epic `{id}` has no {} field to travel in \
             — {} — so nothing is sent and the local reference is kept",
            tool.as_str(),
            epic_absence_reason(tool)
        ),
    })
}

/// Why a tracker's CLI cannot carry an epic membership, per tool.
///
/// A **permanent** claim about the CLI the adapter drives, not "not yet verified",
/// and the wording says so for the same reason `PROJECT_WIRE_VERIFIED`'s reason
/// does: a reader told "the verb is unverified" will wait for it, and there is
/// nothing to wait for. The two reasons differ, so the message does.
fn epic_absence_reason(tool: Tool) -> &'static str {
    match tool {
        Tool::GitLab => {
            "`glab` names at most one epic per issue (`epic_iid`) and exposes no flag \
             to send one, so a membership list has nowhere to go"
        }
        Tool::Linear => {
            "Linear has no epic level at all — the nearest concept is a project — so an \
             epic reference has nowhere to go"
        }
    }
}

/// Map one remote epic reference back onto a local reference id, or say why not.
///
/// The reverse value is **local-shaped**, like [`map_project_from_remote`]'s: the
/// frontmatter key the reference lives under ([`crate::epics::EPICS_KEY`]) and the
/// id, not a copy of the tool's field name — echoing the field back would make the
/// same reference read differently per tracker, which is the opposite of a shared
/// seam.
///
/// Not gated on [`EPIC_WIRE_VERIFIED`], and the module header records why: an id is
/// validated against the local registry before anything is written, so this
/// direction cannot invent local data the way an unverified relation field could.
#[must_use]
pub fn map_epic_from_remote(tool: Tool, remote: &RemoteEpic) -> MappedEpic {
    let id = remote.id.trim();
    if id.is_empty() {
        return MappedEpic::Unsupported(RemoteMappingDiagnostic {
            relation_id: remote.name.clone().unwrap_or_default(),
            field: EPIC_FIELD.to_string(),
            tool,
            message: format!(
                "the remote reported an epic it named `{}` but gave no id, and an id is \
                 the only thing a local reference can match on; nothing was referenced \
                 and the local list is unchanged",
                remote.name.as_deref().unwrap_or("")
            ),
        });
    }
    MappedEpic::Remote {
        field: crate::epics::EPICS_KEY.to_string(),
        value: id.to_string(),
    }
}

/// The remote field GitLab's model carries an issue's health in.
///
/// Named so the diagnostic can say *what* is missing rather than only that something
/// is: a reader told "GitLab cannot carry this" will not go looking for the flag.
const GITLAB_HEALTH_FIELD: &str = "health_status";

/// The remote field Linear's model would need for an issue's health. Linear has no
/// issue level health, so the constant names the field a future adapter would have to
/// introduce — and the mapping says which of the two reasons applies.
const LINEAR_HEALTH_FIELD: &str = "health";

/// Tools whose **model has no field** for an issue's health at all.
///
/// The claim is different from "the verb is not verified", and the message says
/// which, for the same reason `RELATION_CLI_ABSENT` does: a reader who is told
/// "GitLab can express this but the verb is unverified" will look for the verb.
const HEALTH_MODEL_ABSENT: &[Tool] = &[Tool::Linear];

/// Tools verified to drive the health field from their CLI.
///
/// Empty, and for the same reason `PARENT_WIRE_VERIFIED` is: whether `glab issue
/// create --health-status ...` exists is a claim about a program this repository
/// cannot run. The fakes in `tests/bin/` accept no health flag at all, which is
/// better evidence of the surface than an assumption made after it. Flipping a
/// tool on here is a one-line change plus its adapter implementation, once the
/// verb is confirmed by hand.
const HEALTH_WIRE_VERIFIED: &[Tool] = &[];

/// What one local health value maps to on the wire.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MappedHealth {
    /// The remote value to send, as a field/value pair like a relation.
    Remote { field: String, value: String },
    /// The adapter cannot carry it. The **local** value is untouched, which is the
    /// same contract the relationship and parent mappers follow (C-008): a value the
    /// remote cannot hold still survives here, and a remote that lacks the field can
    /// never clear it.
    Unsupported(RemoteMappingDiagnostic),
}

/// Map one local health value to its remote representation, or say why not (T022,
/// T023).
///
/// Pure: no adapter, no I/O, no configuration. Shared by both trackers so a future
/// one cannot be added with a divergent contract, and the representability table
/// lives in exactly one place.
///
/// Only an **issue**-scoped value has a remote home: a rollup belongs to this
/// repository's memberships, and a remote that knew nothing of the parent would carry
/// a number the local side derived. A non-issue scope is therefore reported, never
/// silently sent as if it were the issue's own health.
#[must_use]
pub fn map_health_to_remote(
    tool: Tool,
    scope: &crate::health::HealthScope,
    state: crate::health::HealthState,
) -> MappedHealth {
    let field = health_field(tool);
    if HEALTH_MODEL_ABSENT.contains(&tool) {
        return MappedHealth::Unsupported(RemoteMappingDiagnostic {
            relation_id: scope.as_str(),
            field: field.to_string(),
            tool,
            message: format!(
                "{}'s issue model has no health field, so `{}` stays local; a remote that \
                 cannot carry the value never clears it",
                tool.as_str(),
                state.as_str()
            ),
        });
    }
    let crate::health::HealthScope::Issue(number) = scope else {
        return MappedHealth::Unsupported(RemoteMappingDiagnostic {
            relation_id: scope.as_str(),
            field: field.to_string(),
            tool,
            message: format!(
                "`{}` is a derived value for {}, which has no remote representation; only \
                 an issue's own health can be sent, so the local value is kept",
                state.as_str(),
                scope
            ),
        });
    };
    if HEALTH_WIRE_VERIFIED.contains(&tool) {
        return MappedHealth::Remote {
            field: field.to_string(),
            value: state.as_str().to_string(),
        };
    }
    MappedHealth::Unsupported(RemoteMappingDiagnostic {
        relation_id: format!("issue:{number}"),
        field: field.to_string(),
        tool,
        message: format!(
            "issue #{number}'s `{}` is expressible in {}'s model as `{field}`, but the CLI \
             verb that would carry it is not verified, so nothing is sent; the local value \
             is kept",
            state.as_str(),
            tool.as_str()
        ),
    })
}

/// The field an adapter carries an issue's health in.
fn health_field(tool: Tool) -> &'static str {
    match tool {
        Tool::GitLab => GITLAB_HEALTH_FIELD,
        Tool::Linear => LINEAR_HEALTH_FIELD,
    }
}

// ---------------------------------------------------------------------------
// WP07 (mission roadmap-initiatives-01M3C8SX) — initiatives across a sync
// round trip
// ---------------------------------------------------------------------------
//
// ## What the adapters can actually express, checked rather than assumed
//
// An initiative is a portfolio-level record, and this module's plan is explicit
// that the sync side carries **unsupported-field diagnostics only** — no adapter
// gains an initiative sender here. The representability answer is still derived
// from the CLIs the adapters drive, and the two trackers' answers differ in
// *reason* even though both end at "nothing is sent":
//
// - **GitLab: the CLI has no initiative command at all.** `glab` 1.119.0 (checked
//   against the installed binary on 2026-10-09) lists no `initiative` command:
//   `glab --help` has `issue` and `milestone`, and its experimental `work-items`
//   tree covers epics, issues and tasks. GitLab's *model* has no initiative either.
//   That is a **permanent** answer, like [`RELATION_CLI_ABSENT`], and the wording
//   says so: a reader told "the verb is unverified" would wait for one, and there
//   is nothing to wait for.
// - **Linear: the verb exists, but it cannot hold the record.** `linear-cli` 0.3.28
//   (checked the same day) *does* expose `initiatives list|get|create|update|delete`;
//   `linear-cli initiatives list -o json` parses and fails only with `No workspace
//   selected` (exit 1), which is a grammar-level verification of the command line.
//   So the honest statement is not "there is no verb" — it is that the
//   `create`/`update` verbs take only a **name**, a **description** and a
//   **status**, so they cannot carry the local record's `owner`, `priority`,
//   `labels`, `target_date`, or its typed project/epic/milestone associations.
//   Sending the fields they *can* take while dropping the rest would be a silent
//   drop with extra steps (C-005/C-007), so the whole local record is kept.
//
// `INITIATIVE_WIRE_VERIFIED` is empty, and `initiative_absence_reason` carries the
// per-tool difference so the two answers never blur. The table exists rather than a
// bare `unsupported` constant for the same reason the parent/health tables do: a
// future tracker that models the whole record in its CLI is a one-line addition plus
// its `set_initiatives`.

/// The remote field an adapter would carry an initiative in.
///
/// Both trackers would name it `initiatives`, so — unlike a project association,
/// where the two models genuinely name different fields — a per-tool indirection
/// would carry no information. The per-tool difference lives in
/// [`initiative_absence_reason`], which is where it actually is.
const INITIATIVE_FIELD: &str = "initiatives";

/// Tools whose CLI is **verified to expose no initiative command at all**.
///
/// A *permanent* answer, distinct from "not yet verified", for the same reason
/// [`RELATION_CLI_ABSENT`] is: a reader told "the verb is unverified" will reasonably
/// wait for it, and `glab` has no such command to wait for.
const INITIATIVE_CLI_ABSENT: &[Tool] = &[Tool::GitLab];

/// Tools verified to drive an initiative from their CLI.
///
/// **Empty**, and deliberately so on both trackers. No adapter implements a
/// `set_initiatives`, and the one CLI that exposes initiative verbs
/// (`linear-cli`) cannot carry the record's fields — see the section header. The
/// table is the same shape as the other four so a future tracker that *does* model
/// the whole record is a one-line addition plus its adapter method.
const INITIATIVE_WIRE_VERIFIED: &[Tool] = &[];

/// What one local initiative maps to on the wire.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MappedInitiative {
    /// The remote value to send, as a field/value pair like a relation. A verified
    /// adapter would put the **remote reference** in `value`; until one exists this
    /// arm is unreachable, exactly as [`MappedParent::Remote`] is.
    Remote { field: String, value: String },
    /// The target cannot carry the record. The **local** record is untouched,
    /// which is the contract every other mapper follows (C-005): a record the
    /// remote cannot hold still survives, and a remote that lacks the field can
    /// never clear it.
    Unsupported(RemoteMappingDiagnostic),
}

/// Map one local initiative to its remote representation, or say why not (T034,
/// T035).
///
/// Pure: no adapter, no I/O, no configuration. Shared by both trackers so a future
/// one cannot be added with a divergent contract — and the representability
/// decision lives in exactly one place instead of once per adapter.
///
/// `initiative_id` is the **stable** id (C-002), never a display name: it is the
/// subject the diagnostic names, and the value a verified adapter would send.
#[must_use]
pub fn map_initiative_to_remote(tool: Tool, initiative_id: &str) -> MappedInitiative {
    let field = INITIATIVE_FIELD;
    if INITIATIVE_WIRE_VERIFIED.contains(&tool) {
        return MappedInitiative::Remote {
            field: field.to_string(),
            value: initiative_id.to_string(),
        };
    }
    MappedInitiative::Unsupported(RemoteMappingDiagnostic {
        relation_id: initiative_id.to_string(),
        field: field.to_string(),
        tool,
        message: initiative_absence_reason(tool).to_string(),
    })
}

/// Why a tracker's CLI cannot carry a local initiative, per tool.
///
/// The two reasons differ and the message must not blur them: GitLab's is a
/// **permanent** "the CLI has no such command", while Linear's is "the verb exists
/// but cannot hold the record's fields". A reader told the wrong one would either
/// wait for a command that will never appear or look for a flag that is not there.
fn initiative_absence_reason(tool: Tool) -> &'static str {
    if INITIATIVE_CLI_ABSENT.contains(&tool) {
        return "the CLI exposes no initiative command at all, so the whole local record is \
                kept; a remote that cannot hold an initiative never clears one";
    }
    "the CLI's `initiatives` verbs take only a name, a description and a status — they \
     cannot carry `owner`, `priority`, `labels`, `target_date`, or the typed \
     project/epic/milestone associations — so sending those three fields would drop the \
     rest; the whole local record is kept instead"
}

const GITLAB_BLOCKING_FIELD: &str = "blocking";
const GITLAB_BLOCKING_VALUE: &str = "blocks";
const LINEAR_BLOCKING_FIELD: &str = "blocks";
const LINEAR_BLOCKING_VALUE: &str = "blocks";

/// Map one local relationship to its remote representation, or say why not.
///
/// Pure: no adapter, no I/O, no configuration. Both trackers share it, so a future
/// one cannot be added with a divergent contract (T033) — and the representability
/// table lives in exactly one place instead of once per adapter.
///
/// `target` is the **target issue's remote reference**, if it is known: Linear's
/// `relations add` needs the target's remote identifier (`ENG-42`), and an edge
/// whose target has not been exported yet cannot be sent. Passing `None` therefore
/// yields a diagnostic that names the target and says so — never a guessed
/// identifier (C-005: the local edge survives). Trackers whose verb does not need a
/// second endpoint (or none of whose verbs are verified) ignore `target`.
#[must_use]
pub fn map_relation_to_remote(
    tool: Tool,
    relation: &crate::relationships::Relationship,
    target: Option<&str>,
) -> MappedRelation {
    use crate::relationships::RelationKind;
    let (field, value) = match tool {
        Tool::GitLab => (GITLAB_BLOCKING_FIELD, GITLAB_BLOCKING_VALUE),
        Tool::Linear => (LINEAR_BLOCKING_FIELD, LINEAR_BLOCKING_VALUE),
    };
    // The tracker's *model* can express a blocking edge — and the adapter drives a
    // CLI whose verb is verified only for the tools on `RELATION_WIRE_VERIFIED`.
    let model_supports = matches!(
        relation.kind,
        RelationKind::Blocks | RelationKind::BlockedBy
    );
    if model_supports && RELATION_WIRE_VERIFIED.contains(&tool) {
        let value = match tool {
            // Linear's `relations add` takes the target's **remote identifier** as
            // its second endpoint. Without one there is nothing to send, and a
            // guessed identifier would be worse than a diagnostic.
            Tool::Linear => match target {
                Some(target) => target.to_string(),
                None => {
                    return MappedRelation::Unsupported(RemoteMappingDiagnostic {
                        relation_id: relation.id.clone(),
                        field: field.to_string(),
                        tool,
                        message: format!(
                            "`{}` targets #{}, which has not been exported yet, so its \
                             remote identifier is unknown and the edge cannot be sent; \
                             the local edge is kept",
                            relation.kind.as_str(),
                            relation.to
                        ),
                    });
                }
            },
            // GitLab is never on `RELATION_WIRE_VERIFIED` (its CLI has no relation
            // command at all), so this arm is unreachable today; its rendering is
            // left exactly as it was rather than "fixed" into an unverified shape.
            Tool::GitLab => format!("{value} #{}", relation.to),
        };
        return MappedRelation::Remote {
            field: field.to_string(),
            value,
        };
    }
    if model_supports {
        // Expressible in the model, not drivable from the CLI. A *different* claim
        // from "unsupported", and the message says which — a reader who is told
        // "GitLab cannot express this" will not go looking for the verb. And for a
        // CLI verified to have no relation command at all, the message must not say
        // "not verified": there is nothing to verify (tix #1354).
        let reason = if RELATION_CLI_ABSENT.contains(&tool) {
            format!(
                "the {} CLI exposes no issue-relation command, so it cannot be sent",
                tool.as_str()
            )
        } else {
            "the CLI verb that would carry it is not verified, so nothing is sent".to_string()
        };
        return MappedRelation::Unsupported(RemoteMappingDiagnostic {
            relation_id: relation.id.clone(),
            field: field.to_string(),
            tool,
            message: format!(
                "`{}` is expressible in {}'s model as `{field}`, but {reason}; the local \
                 edge is kept",
                relation.kind.as_str(),
                tool.as_str()
            ),
        });
    }
    MappedRelation::Unsupported(RemoteMappingDiagnostic {
        relation_id: relation.id.clone(),
        field: field.to_string(),
        tool,
        message: format!(
            "`{}` is a local-only relation; {} has no field for it, so the local \
             edge is kept and the remote one is not created",
            relation.kind.as_str(),
            tool.as_str()
        ),
    })
}

/// The inverse: read a remote relation back to a local kind and target.
///
/// Symmetric with [`map_relation_to_remote`] by construction — the blocking field
/// maps back to `blocks`, and nothing else maps back at all. A remote payload
/// carrying a field this function does not recognise yields a diagnostic rather
/// than a default, so an import cannot invent a relation the export never made.
#[must_use]
pub fn map_relation_from_remote(
    tool: Tool,
    field: &str,
    value: &str,
    relation_id: &str,
) -> MappedRelation {
    let expected = match tool {
        Tool::GitLab => GITLAB_BLOCKING_FIELD,
        Tool::Linear => LINEAR_BLOCKING_FIELD,
    };
    // Gated the same way as the forward direction: without a verified verb there is
    // no payload this could have received, and coercing one would invent a
    // relationship the export never made.
    if field == expected && RELATION_WIRE_VERIFIED.contains(&tool) {
        // The value this module writes is `"{kind} #{n}"`, so the target is the
        // **last** whitespace-separated token. Taking the first reads the kind word
        // and fails — which is what an earlier version did, and it made the round
        // trip look asymmetric when only the parser was.
        if let Some(target) = value
            .split_whitespace()
            .last()
            .and_then(|t| t.strip_prefix('#'))
            .and_then(|t| t.parse::<u32>().ok())
        {
            // The reverse value is **local**-shaped — the canonical kind spelling
            // and a `#`-prefixed number — not a copy of the remote field name.
            // GitLab's field is `blocking` and Linear's is `blocks`; echoing the
            // field back would make the round trip return different text per
            // tracker for the same relationship, which is the opposite of
            // symmetric.
            return MappedRelation::Remote {
                field: "kind".to_string(),
                value: format!("blocks #{target}"),
            };
        }
        return MappedRelation::Unsupported(RemoteMappingDiagnostic {
            relation_id: relation_id.to_string(),
            field: field.to_string(),
            tool,
            message: format!(
                "`{value}` is not a target issue number, so the remote relation \
                 cannot be read back; no local edge was created"
            ),
        });
    }
    MappedRelation::Unsupported(RemoteMappingDiagnostic {
        relation_id: relation_id.to_string(),
        field: field.to_string(),
        tool,
        message: format!(
            "`{field}` is not a relation field {} writes, so it is ignored; the \
             local relationship set is unchanged",
            tool.as_str()
        ),
    })
}

/// Map a local column to the remote state/label sent to the tracker
/// (`contracts/external-tools.md` mapping table).
///
/// - GitLab: done → `closed`, anything else → `opened`.
/// - Linear: done → `Done`, otherwise the first non-done column label.
#[must_use]
pub fn local_to_remote_status(tool: Tool, local_status: &str, config: &Config) -> String {
    let board = config.default_config();
    match tool {
        Tool::GitLab => {
            if is_done_column(board, local_status, config) {
                "closed".into()
            } else {
                "opened".into()
            }
        }
        Tool::Linear => {
            if is_done_column(board, local_status, config) {
                "Done".into()
            } else {
                first_work_column(board, config).to_string()
            }
        }
    }
}

/// Map a remote state/label back onto a local column. Closed/Done maps to
/// the effective done column; anything else lands in the column whose name
/// matches (case-insensitive), else the first column — per the contract's
/// "whose name matches, else into the first column".
#[must_use]
pub fn remote_to_local_status(tool: Tool, remote_status: &str, config: &Config) -> String {
    let board = config.default_config();
    // WP07 T032: the *service's* completion column, not `done_column`. See
    // `completion_column` for why choosing one local column is this module's business
    // while the meaning of "complete" is not.
    let done = completion_column(board, config);
    match tool {
        Tool::GitLab => {
            if remote_status == "closed" {
                done
            } else {
                board
                    .columns
                    .first()
                    .cloned()
                    .unwrap_or_else(|| "todo".into())
            }
        }
        Tool::Linear => {
            if remote_status == "Done" {
                done
            } else {
                board
                    .columns
                    .iter()
                    .find(|c| c.eq_ignore_ascii_case(remote_status))
                    .cloned()
                    .unwrap_or_else(|| {
                        board
                            .columns
                            .first()
                            .cloned()
                            .unwrap_or_else(|| "todo".into())
                    })
            }
        }
    }
}

/// Whether `local_status` is the board's **completion** column, by the service.
///
/// WP07 T032. This was `board.effective_done_column() == Some(local_status)` — a
/// column-*name* comparison, which is a second local definition of "done" and exactly
/// what C-004 forbids. It agreed with the service on a board with no
/// `category_map` — every existing configuration — and disagreed on precisely the
/// boards this mission exists to support: a board mapping `shipped` to `completed`
/// exports `shipped` as *open* and leaves `done_column` (mapped to `active`) as
/// *closed*.
///
/// `sync/mod.rs` is out of this mission's map; the edit is the completion
/// reconciliation T032 names, and the rationale is recorded here and in
/// `decisions/WP07-verification.md`.
fn is_done_column(board: &BoardConfiguration, local_status: &str, config: &Config) -> bool {
    let resolution =
        crate::workflow::resolution(config, board, crate::workflow::active_board_name(config));
    resolution
        .resolve(local_status)
        .is_some_and(crate::workflow::WorkflowCategory::is_complete)
}

/// The board's completion **column**, chosen by the service rather than by
/// `done_column`.
///
/// The remote trackers have a two-state notion of "closed", so the export path has to
/// pick one local column to send as closed. That is a **remote-translation** concern
/// and belongs here; deciding what "complete" *means* is not, and is the service's.
///
/// Preferring the column the service calls complete means a board whose completion
/// category sits on a column other than `done_column` still round-trips: export
/// closes the column that is genuinely complete, and import brings it back to that
/// same column rather than to `done_column`.
fn completion_column(board: &BoardConfiguration, config: &Config) -> String {
    // WP09: this was a private re-implementation — the same "first complete column,
    // else `done_column`, else `done`" rule the service now owns, duplicated here so
    // that `first_work_column` and `remote_to_local_status` could each have a total
    // `String`. It is the module's own doc comment, written in WP07, that says a
    // second local definition is a C-004 defect, so the duplicate had to go.
    crate::workflow::completion_column_or_default(board, config)
}

/// The first column that is **not** the board's completion column, or the
/// completion column when every column is complete.
///
/// WP09: "not the done column" is a question about **completion**, so it is asked of
/// the service rather than of `done_column`. On a board whose `category_map` puts
/// `completed` on `shipped` while `done_column` is `done`, the old version returned
/// `todo` as the first *work* column when `shipped` is the first column that is
/// genuinely finished — so an export labelled a shipped issue as work in progress.
fn first_work_column<'a>(board: &'a BoardConfiguration, config: &Config) -> &'a str {
    // The lifetime is `board`'s, and the `done` fallback cannot borrow from `config`
    // — so the completion column is compared as a `String` and the fallback is a
    // literal. The alternative, returning `&'a str` from a local, is what forces the
    // old `unwrap_or("done")` to exist at all.
    let done = crate::workflow::completion_column_or_default(board, config);
    board
        .columns
        .iter()
        .find(|c| c.as_str() != done)
        .map_or("done", String::as_str)
}

/// The inverse of `model::civil_from_days` (Howard Hinnant's
/// `days_from_civil`): calendar date → days since the Unix epoch.
#[must_use]
pub fn days_from_civil(y: i64, m: u32, d: u32) -> i64 {
    let y = if m <= 2 { y - 1 } else { y };
    let era = if y >= 0 { y } else { y - 399 } / 400;
    let yoe = y - era * 400; // [0, 399]
    let mp = (m + 9) % 12; // [0, 11]
    let doy = i64::from((153 * mp + 2) / 5 + d - 1); // [0, 365]
    let doe = yoe * 365 + yoe / 4 - yoe / 100 + doy; // [0, 146096]
    era * 146_097 + doe - 719_468
}

/// Parse `YYYY-MM-DD` into days since the Unix epoch.
#[must_use]
pub fn date_to_epoch_days(ymd: &str) -> Option<i64> {
    let mut parts = ymd.trim().split('-');
    let y: i64 = parts.next()?.parse().ok()?;
    let m: u32 = parts.next()?.parse().ok()?;
    let d: u32 = parts.next()?.parse().ok()?;
    if parts.next().is_some() {
        return None;
    }
    if !(1..=12).contains(&m) || !(1..=31).contains(&d) {
        return None;
    }
    Some(days_from_civil(y, m, d))
}

/// Parse an ISO-8601 remote timestamp into epoch seconds. Accepts
/// `YYYY-MM-DDTHH:MM:SS` (the `T` may be a space) with optional fractional
/// seconds and a `Z` or `±HH:MM` zone.
#[must_use]
pub fn iso_to_epoch_secs(input: &str) -> Option<i64> {
    let (date, time) = input.trim().split_once(['T', ' '])?;
    let days = date_to_epoch_days(date)?;
    let (time, zone) = split_zone(time);
    let mut hms = time.split(':');
    let hh: i64 = hms.next()?.parse().ok()?;
    let mm: i64 = hms.next()?.parse().ok()?;
    let ss_part = hms.next()?;
    let whole: i64 = ss_part.split('.').next()?.parse().ok()?;
    if !(0..=23).contains(&hh) || !(0..=59).contains(&mm) || !(0..=59).contains(&whole) {
        return None;
    }
    let mut secs = days * 86_400 + hh * 3600 + mm * 60 + whole;
    if let Some((zh, zm)) = zone {
        secs -= zh * 3600 + zm * 60;
    }
    Some(secs)
}

/// Split `HH:MM:SS[.frac][zone]` into the bare time and an optional
/// `(hours, minutes)` zone offset (already sign-adjusted).
fn split_zone(time: &str) -> (&str, Option<(i64, i64)>) {
    if time.ends_with('Z') || time.ends_with('z') {
        return (&time[..time.len() - 1], Some((0, 0)));
    }
    match time.rfind(['+', '-']) {
        Some(i) if i > 0 => {
            let (bare, zone) = time.split_at(i);
            let sign = if zone.starts_with('-') { -1i64 } else { 1i64 };
            let digits = &zone[1..];
            let (zh, zm) = if let Some((h, m)) = digits.split_once(':') {
                (h.parse::<i64>().ok(), m.parse::<i64>().ok())
            } else if digits.len() == 2 {
                (digits.parse::<i64>().ok(), Some(0))
            } else if digits.len() >= 3 {
                let (h, m) = digits.split_at(digits.len() - 2);
                (h.parse::<i64>().ok(), m.parse::<i64>().ok())
            } else {
                (None, None)
            };
            match (zh, zm) {
                (Some(zh), Some(zm)) => (bare, Some((sign * zh, sign * zm))),
                _ => (bare, None),
            }
        }
        Some(_) | None => (time, None),
    }
}

/// The conflict rule: the remote wins when its `updated_at` is strictly later
/// than the local issue's `updated` (a `YYYY-MM-DD` interpreted as end of
/// day). A remote timestamp that cannot be parsed counts as *not newer*, so
/// the local issue is kept.
#[must_use]
pub fn is_remote_newer(remote_updated_at: &str, local_updated: &str) -> bool {
    let Some(remote) = iso_to_epoch_secs(remote_updated_at) else {
        return false;
    };
    let local_end_of_day = date_to_epoch_days(local_updated).map_or(0, |d| d * 86_400 + 86_399);
    remote > local_end_of_day
}

/// Redact a resolved secret from text flowing through error/report surfaces.
#[must_use]
pub fn scrub_secret(text: &str, secret: &str) -> String {
    if secret.is_empty() {
        return text.to_string();
    }
    text.replace(secret, "<token>")
}

/// The contract's missing-binary wording (`contracts/external-tools.md`):
/// exit code 3 with `required tool not found: <tool> — install from <source>`.
fn not_found_message(program: &str) -> String {
    match program {
        "glab" => "required tool not found: glab — install from https://gitlab.com/gitlab-org/cli"
            .to_string(),
        _ => format!("required tool not found: {program} — install it and retry"),
    }
}

/// A dry-run stand-in for a remote reference that pass 1 of a real run would
/// create. Used only in the preview, so an edge to a not-yet-exported issue reads
/// as sendable without inventing an identifier.
const DRY_RUN_NEW_REF: &str = "<new remote id>";

/// `tix export`: mirror local issues to the remote tracker, recording the
/// remote id back into the local `gitlab_id`/`linear_id` so a re-run updates
/// instead of creating duplicates (idempotency, FR-Remote-sync).
///
/// Returns the number of issues handled (created or updated — `close` on an
/// updated GitLab done issue is not counted separately).
pub fn export(
    store: &Store,
    tool: Tool,
    config: &Config,
    dry_run: bool,
    out: &mut dyn Write,
) -> Result<SyncReport> {
    let mut adapter = adapter_for(tool, config)?;
    let mut report = SyncReport::default();
    // Built **once** for the whole run, which is the service's rule: resolution is
    // not rebuilt per issue. See `workflow::resolution`.
    let resolution = crate::workflow::resolution(config, config.default_config(), "default");

    if dry_run {
        for issue in store.list()? {
            match remote_ref(tool, &issue) {
                Some(r) => {
                    writeln!(out, "would update {tool} issue {r} \"{}\"", issue.title)?;
                }
                None => {
                    writeln!(out, "would create {tool} issue \"{}\"", issue.title)?;
                }
            }
        }
        writeln!(out, "dry run — {tool} CLI was not invoked")?;
        report.handled = store.list()?.len();
        // Every issue a real run would export, plus the remote references the
        // existing ones already carry. A relation endpoint that is **in the export
        // set** is resolvable: pass 1 will give it a remote reference, so the edge
        // is sendable and the preview must say so rather than report it as
        // unsendable. Only a target genuinely absent from the export set (nothing a
        // real run would create) is reported as unsendable.
        let export_set: HashSet<u32> = store.list()?.into_iter().map(|i| i.number).collect();
        let existing: HashMap<u32, String> = store
            .list()?
            .into_iter()
            .filter_map(|i| remote_ref(tool, &i).map(|r| (i.number, r.to_string())))
            .collect();
        // The dry run reports the same diagnostics a real run would, so
        // "preview then commit" is not the only way to find out that a
        // relationship cannot leave the machine.
        for issue in store.list()? {
            for rel in store.relationships_for(issue.number)? {
                // The same adjacency rule as the real pass 2: one edge, from its
                // declaring side, so a dry run previews exactly what a real run does
                // rather than reporting an edge twice.
                if rel.from != issue.number {
                    continue;
                }
                let other = if rel.from == issue.number {
                    rel.to
                } else {
                    rel.from
                };
                let target = if let Some(r) = existing.get(&other) {
                    Some(r.as_str())
                } else if export_set.contains(&other) {
                    // Unknown until pass 1 runs; a marker keeps the edge sendable in
                    // the preview without inventing an identifier.
                    Some(DRY_RUN_NEW_REF)
                } else {
                    None
                };
                match map_relation_to_remote(tool, &rel, target) {
                    MappedRelation::Remote { field, value } => {
                        writeln!(out, "would export {tool} {field} {value} ({})", rel.id)?;
                    }
                    unsupported @ MappedRelation::Unsupported(_) => {
                        report.note(unsupported, out)?
                    }
                }
            }
            // And the parent, so a dry run surfaces exactly what a real run would.
            if issue.parent.is_some() {
                report.note_parent(map_parent_to_remote(tool, issue.number, issue.parent), out)?;
            }
            // And every project association, for the same reason: on both trackers
            // the answer is "it cannot leave the machine", and a user previewing an
            // export is exactly who needs to know that before running it.
            for project_id in issue.projects.as_deref().unwrap_or_default() {
                report.note_project(map_project_to_remote(tool, issue.number, project_id), out)?;
            }
            // And every epic reference, for the same reason (C-007): the answer is
            // the same on both trackers, and a preview that hid it would be the one
            // place a reader could not learn it.
            for epic_id in issue.epics.as_deref().unwrap_or_default() {
                report.note_epic(map_epic_to_remote(tool, issue.number, epic_id), out)?;
            }
        }
        return Ok(report);
    }

    // **Pass 1** — create or update every issue, and record `issue.number -> remote
    // reference`. Projects and epics are sent here, because they hang off the issue
    // itself and need no other endpoint to exist.
    let mut remote_ids: HashMap<u32, String> = HashMap::new();
    let mut handled = 0;
    for mut issue in store.list()? {
        let remote_status = local_to_remote_status(tool, issue.status.display(), config);
        let labels: Vec<String> = issue.labels.clone();
        let assignee = issue.assignee.as_deref();
        let priority = issue.priority.to_string();
        match remote_ref(tool, &issue) {
            Some(r) => {
                let r = r.to_string();
                adapter.update_issue(
                    &r,
                    &issue.title,
                    &issue.body,
                    &labels,
                    assignee,
                    Some(&priority),
                    &remote_status,
                )?;
                if !adapter.done_via_status() && crate::workflow::is_completed(&issue, &resolution)
                {
                    adapter.mark_done(&r)?;
                }
                writeln!(out, "updated {tool} issue {r} \"{}\"", issue.title)?;
            }
            None => {
                let id = adapter.create_issue(
                    &issue.title,
                    &issue.body,
                    &labels,
                    assignee,
                    Some(&priority),
                    &remote_status,
                )?;
                if !adapter.done_via_status() && crate::workflow::is_completed(&issue, &resolution)
                {
                    adapter.mark_done(&id)?;
                }
                match tool {
                    Tool::GitLab => issue.gitlab_id = Some(id.clone()),
                    Tool::Linear => issue.linear_id = Some(id.clone()),
                }
                store.update(&issue.filename, &issue)?;
                writeln!(
                    out,
                    "created {tool} issue {id} \"{}\" (remote id recorded)",
                    issue.title
                )?;
            }
        }
        // The parent reference is offered to the same shared mapper, on the same
        // "after the issue" footing as a relationship: a parent only means
        // something once the parent itself exists remotely. Nothing is sent while
        // `PARENT_WIRE_VERIFIED` is empty, so this reports rather than acts — and
        // the local reference is untouched either way.
        report.note_parent(map_parent_to_remote(tool, issue.number, issue.parent), out)?;

        // Project associations are offered to the same shared mapper, on the same
        // "after the issue" footing as a relationship: what it accepts is sent to the
        // adapter, what it does not becomes a diagnostic naming the field. Nothing is
        // sendable on either tracker — see `PROJECT_WIRE_VERIFIED` — so this reports
        // rather than acts, and the local list is untouched either way (C-005). A
        // diagnostic is emitted whether or not the issue has a remote id yet, unlike
        // the relationship block below: the membership cannot be sent regardless, so
        // suppressing the report while the id is still missing would hide the one
        // fact the reader needs.
        let mut sendable_projects: Vec<MappedProject> = Vec::new();
        for project_id in issue.projects.as_deref().unwrap_or_default() {
            match map_project_to_remote(tool, issue.number, project_id) {
                MappedProject::Remote { field, value } => {
                    writeln!(out, "exported {tool} {field} {value} (#{})", issue.number)?;
                    sendable_projects.push(MappedProject::Remote { field, value });
                }
                unsupported @ MappedProject::Unsupported(_) => {
                    report.note_project(unsupported, out)?;
                }
            }
        }

        // Epic references are offered to the same shared mapper, on the same
        // "after the issue" footing: what it accepts would be sent to the adapter,
        // what it does not becomes a diagnostic naming the field. Nothing is
        // sendable on either tracker — see `EPIC_WIRE_VERIFIED` — so this reports
        // rather than acts, and the local reference list is untouched either way
        // (C-007). A diagnostic is emitted whether or not the issue has a remote id
        // yet, for the same reason the project block gives: the reference cannot be
        // sent regardless, so suppressing the report while the id is missing would
        // hide the one fact the reader needs.
        let mut sendable_epics: Vec<MappedEpic> = Vec::new();
        for epic_id in issue.epics.as_deref().unwrap_or_default() {
            match map_epic_to_remote(tool, issue.number, epic_id) {
                MappedEpic::Remote { field, value } => {
                    writeln!(out, "exported {tool} {field} {value} (#{})", issue.number)?;
                    sendable_epics.push(MappedEpic::Remote { field, value });
                }
                unsupported @ MappedEpic::Unsupported(_) => {
                    report.note_epic(unsupported, out)?;
                }
            }
        }

        let remote = match remote_ref(tool, &issue) {
            Some(r) => r.to_string(),
            None => match tool {
                Tool::GitLab => issue.gitlab_id.clone(),
                Tool::Linear => issue.linear_id.clone(),
            }
            .unwrap_or_default(),
        };
        if !remote.is_empty() {
            adapter.set_projects(&remote, &sendable_projects)?;
            adapter.set_epics(&remote, &sendable_epics)?;
            remote_ids.insert(issue.number, remote);
        }
        handled += 1;
    }

    // **Pass 2** — the relationships, now that **both** endpoints exist remotely.
    // An edge is only meaningful once both issues have a remote reference, and on a
    // first export the target is frequently created *after* the issue the edge is
    // stored on, so this cannot run inside pass 1. Each is offered to the shared
    // mapper with the target's resolved remote reference: what it accepts is sent to
    // the adapter, what it does not (including a target that was never exported)
    // becomes a diagnostic naming the field. The adapter never decides
    // representability.
    for issue in store.list()? {
        let Some(remote) = remote_ids.get(&issue.number).cloned() else {
            continue;
        };
        let mut sendable = Vec::new();
        for rel in store.relationships_for(issue.number)? {
            // `relationships_for` is an **adjacency** lookup: it returns every edge
            // that *touches* this issue, in its stored form (`from` is the declaring
            // side). Send each edge exactly once, from its declaring side — Linear's
            // `relations add` is additive, so sending it from both endpoints would
            // create a duplicate remote edge (and print the line twice).
            if rel.from != issue.number {
                continue;
            }
            // `from` is now this issue, so the other endpoint is `to`; spelled out
            // rather than assumed, so the adjacency semantics are not re-learnt by
            // the next reader.
            let other = if rel.from == issue.number {
                rel.to
            } else {
                rel.from
            };
            let target = remote_ids.get(&other).map(String::as_str);
            match map_relation_to_remote(tool, &rel, target) {
                MappedRelation::Remote { field, value } => {
                    writeln!(out, "exported {tool} {field} {value} ({})", rel.id)?;
                    sendable.push(MappedRelation::Remote { field, value });
                }
                unsupported @ MappedRelation::Unsupported(_) => report.note(unsupported, out)?,
            }
        }
        adapter.set_relations(&remote, &sendable)?;
    }
    report.handled = handled;
    writeln!(
        out,
        "exported {handled} issue(s) to {tool} ({} diagnostic(s) — local data the remote \
         cannot hold)",
        report.diagnostics.len()
    )?;
    Ok(report)
}

/// `tix import`: pull open remote issues into local files.
///
/// Conflict resolution: a remote issue that already tracks a local one skips
/// the local file when the local `updated` is later or equal; when the remote
/// `updated_at` is newer the local file is overwritten (fields + body, keeping
/// `created`), with the previous file first copied into the centralized backup
/// directory (`.tix-backups/` beside the issues directory, #1581).
///
/// `policy` is the explicit triage-entry policy (WP07 T034). It decides **only
/// where a newly created file lands and what the report says about it**: the
/// conflict rules above, remote ids, and adapter behaviour are untouched, and
/// the overwrite path never consults it (T036).
///
/// Returns the number of local files created or overwritten.
pub fn import(
    store: &Store,
    tool: Tool,
    config: &Config,
    out: &mut dyn Write,
    policy: crate::triage::import_policy::ImportPolicy,
) -> Result<SyncReport> {
    let mut adapter = adapter_for(tool, config)?;
    import_with_adapter(store, tool, config, out, policy, adapter.as_mut())
}

/// [`import`] with the adapter injected — the [`CommandRunner`] pattern, so the
/// orchestration under test is the real one and the remote side is a fake that
/// returns canned [`RemoteIssue`]s without spawning a process (WP07 T037).
///
/// `command`s like `tix import` still go through [`import`]; this entry point
/// exists so a test can hold every input of the triage policy in one place —
/// config, policy, and the remote payloads — instead of installing a fake
/// binary on `PATH` and running the compiled CLI to reach it.
pub fn import_with_adapter(
    store: &Store,
    tool: Tool,
    config: &Config,
    out: &mut dyn Write,
    policy: crate::triage::import_policy::ImportPolicy,
    adapter: &mut dyn TrackerAdapter,
) -> Result<SyncReport> {
    // Resolved **before** the loop: a policy this project cannot represent
    // refuses the whole import, not the third item of it.
    let router = crate::triage::import_policy::resolve(config, policy)?;
    let remote_issues = adapter.list_open()?;
    let mut report = SyncReport::default();
    let mut handled = 0;
    // Remote ids imported this run, paired with the local number each one landed
    // on. A parent is named by a **remote** id in the payload, so the reference can
    // only be restored after the parent itself has been created — which is why
    // this is a second pass rather than something set while building each issue.
    let mut imported: Vec<(String, u32)> = Vec::new();
    // `(child remote id, parent remote id)` for every payload that named one.
    let mut claims: Vec<(String, String)> = Vec::new();
    // `(remote issue id, the project references that payload reported)` — WP08.
    // Collected for **every** payload, and applied after the issues exist, so a
    // payload's order cannot decide whether an association lands (T037 step 4).
    let mut project_payloads: Vec<(String, Vec<RemoteProject>)> = Vec::new();
    // `(remote issue id, the epic references that payload reported)` — WP08. Same
    // second-pass treatment as the project payloads, so the order a payload's issues
    // arrive in cannot decide whether a reference lands.
    let mut epic_payloads: Vec<(String, Vec<RemoteEpic>)> = Vec::new();
    // `(remote issue id, the local number it landed on)` for every payload this run
    // found a local counterpart for — created here or already tracked. Distinct from
    // `imported`, which is create-only and is what the parent pass resolves
    // references through.
    let mut located: Vec<(String, u32)> = Vec::new();
    for remote in remote_issues.clone() {
        if let Some(parent) = remote.parent.clone() {
            claims.push((remote.id.clone(), parent));
        }
        if !remote.projects.is_empty() {
            project_payloads.push((remote.id.clone(), remote.projects.clone()));
        }
        if !remote.epics.is_empty() {
            epic_payloads.push((remote.id.clone(), remote.epics.clone()));
        }
        let tracked = store
            .list()?
            .into_iter()
            .find(|i| remote_ref(tool, i) == Some(remote.id.as_str()));
        match tracked {
            None => {
                // WP07 T034/T035: the placement decision is made here, once, from
                // the remote state and the configured entry column — before any
                // byte of the file exists. `requested` comes from this module's
                // own mapper rather than being re-derived by the policy, so the
                // two answers can be compared in the report instead of guessed at.
                let requested = remote_to_local_status(tool, &remote.state, config);
                let mapping = router.place(&remote.state, &requested);
                let mut issue = Issue {
                    projects: None,
                    id: None,
                    number: 0,
                    title: remote.title.clone(),
                    status: Status::new(mapping.landed.clone()),
                    labels: remote.labels.clone(),
                    priority: crate::model::Priority::Medium,
                    assignee: remote.assignee.clone(),
                    estimate: None,
                    commit: None,
                    gitlab_id: None,
                    linear_id: None,
                    mission: None,
                    task: None,
                    relationships: vec![],
                    related_issues: vec![],
                    files: vec![],
                    cycles: None,
                    milestones: None,
                    reviewer: None,
                    start_date: None,
                    due_date: None,
                    created: crate::model::today(),
                    type_: None,
                    updated: crate::model::today(),
                    filename: String::new(),
                    body: String::new(),
                    history: crate::model::History::new(),
                    has_retired_links_key: false,
                    time_entries: vec![],
                    parent: None,
                    series: None,
                    health: None,
                    epics: None,
                    extra_frontmatter: std::collections::BTreeMap::new(),
                    archived: false,
                    entered_at: None,
                    source: None,
                };
                // T035: entry metadata through the same seam every other entry
                // uses. The queue's age is measured from `entered_at`, so an issue
                // that entered the board through an import has to record that it
                // did — and `import` is the origin data-model §2 documents for it.
                //
                // The **landing column** decides, not `mapping.routed`: `routed` is a
                // policy notion, so under `--triage-policy remote` (or a default whose
                // remote-mapped column happens to be the entry column) an imported
                // issue landed in the inbox with no stamp and the queue reported
                // `unknown` for an issue it was listing. On a project with no
                // `[triage]` section the shared rule stamps nothing, which is the
                // outcome the old guard was reaching for.
                crate::triage::record_entry_if_inbox(config, &mut issue, "import")?;
                match tool {
                    Tool::GitLab => issue.gitlab_id = Some(remote.id.clone()),
                    Tool::Linear => issue.linear_id = Some(remote.id.clone()),
                }
                // WP07 T031: a **column check** on the incoming status, and only
                // that. `remote_to_local_status` already lands on a column the board
                // configures — the service's completion column, or a name match, or
                // the first — so this is the belt to that braces, and it means an
                // import can never create a file in a column the board lacks. The
                // create path performs the same check (WP05), so this is belt *and*
                // braces for the remote-sourced case.
                //
                // Not a transition evaluation: a new issue is not leaving anywhere, so
                // the terminal lock has nothing to say. Importing an issue directly
                // into a terminal column is legitimate.
                let (_, resolution) = crate::workflow::active_resolution(config);
                if resolution.resolve(issue.status.display()).is_none() {
                    // Reported, not written. A skipped item is visible and the rest of
                    // the batch still lands.
                    writeln!(
                        out,
                        "skipped {tool} issue {} \"{}\": `{}` is not a column on board `{}`",
                        remote.id, remote.title, issue.status, resolution.board
                    )?;
                    report.skipped += 1;
                    continue;
                }
                // One transaction per imported issue (#1580), never one over the
                // whole import: each remote issue has its own outcome, and a
                // failure on one must not roll back the others. `create` claims a
                // number and writes the file, so the claim and the bytes are one
                // unit.
                let path =
                    store.transaction(|| store.create(&mut issue, &remote.description, None))?;
                imported.push((remote.id.clone(), issue.number));
                located.push((remote.id.clone(), issue.number));
                let name = path
                    .file_name()
                    .map(|n| n.to_string_lossy().to_string())
                    .unwrap_or_default();
                // T035: the mapping is named in the same line that names the file,
                // and `report_clause` is empty exactly when the default policy
                // decided nothing — so a legacy project's report is byte-identical
                // to what it was, and a project that routed says where the remote
                // state asked for and where the issue landed.
                let clause = mapping.report_clause();
                writeln!(
                    out,
                    "imported {tool} issue {} \"{}\" as #{} ({}) [{name}]{clause}",
                    remote.id, remote.title, issue.number, issue.status
                )?;
                handled += 1;
            }
            Some(local) => {
                // The payload found its local issue. Recorded before the branches
                // below, because the association pass needs to attach a remote
                // payload's projects to it whether or not this run also overwrote
                // its fields — "kept" is a statement about title and body, not about
                // membership.
                located.push((remote.id.clone(), local.number));
                if is_remote_newer(remote.updated_at.as_deref().unwrap_or(""), &local.updated) {
                    let backup = crate::backup::save(&store.issues_dir, &local.filename);
                    // Captured before `local` is moved into `overwritten`: the
                    // skip path restores the local status, and reading it back off
                    // `overwritten` after the assignment would restore the status the
                    // *incoming* value was about to overwrite.
                    let local_status = local.status.clone();
                    let mut overwritten = local;
                    let keep_created = overwritten.created.clone();
                    overwritten.title = remote.title.clone();
                    overwritten.body = remote.description.clone();
                    overwritten.labels = remote.labels.clone();
                    let incoming = Status::new(remote_to_local_status(tool, &remote.state, config));
                    // WP07 T031: validate the incoming status as a **transition**,
                    // because this *is* one — an existing issue moving columns.
                    //
                    // **Skip-and-report**, which is the disposition the design settles
                    // (T031 step 3). The alternative, apply-and-report, would make a
                    // board's policy non-binding for the one path nobody watches, and
                    // a remote whose states the board forbids would quietly win.
                    // Skipping keeps the local file truthful and puts the conflict in
                    // the report where a human will see it. Recorded here rather than
                    // in `data-model.md` §8, which is a protected path for this lane.
                    let (_, resolution) = crate::workflow::active_resolution(config);
                    let transition = crate::workflow::validate_transition(
                        &overwritten,
                        incoming.display(),
                        &resolution,
                        config,
                        None,
                    );
                    if let crate::workflow::TransitionOutcome::Rejected(diagnostic) = transition {
                        // The status is left alone; the other fields still import,
                        // because they are not what the policy governs. The file is
                        // rewritten, so this is a **partial** import — reported as such
                        // rather than as a plain overwrite.
                        overwritten.status = local_status.clone();
                        overwritten.title = remote.title.clone();
                        overwritten.body = remote.description.clone();
                        overwritten.labels = remote.labels.clone();
                        if let Some(a) = &remote.assignee {
                            overwritten.assignee = Some(a.clone());
                        }
                        overwritten.created = keep_created;
                        overwritten.bump_updated();
                        let filename = overwritten.filename.clone();
                        // One transaction for the item's corpus write (#1580): the
                        // `update` writes the file and may then reconcile its
                        // location, so those two mutations are one unit. The
                        // backup copy above is deliberately out-of-corpus and is
                        // not part of the journaled set.
                        store.transaction(|| store.update(&filename, &overwritten))?;
                        writeln!(
                            out,
                            "overwrote {tool} issue {} \"{}\" without its status: {diagnostic} \
                             (kept {})",
                            remote.id, overwritten.title, overwritten.status
                        )?;
                        report.skipped += 1;
                        handled += 1;
                        continue;
                    }
                    overwritten.status = incoming;
                    if let Some(a) = &remote.assignee {
                        overwritten.assignee = Some(a.clone());
                    }
                    overwritten.created = keep_created;
                    overwritten.bump_updated();
                    let filename = overwritten.filename.clone();

                    // An import that moves a locally-blocked issue into the
                    // board's completion column goes through the same blocked-move
                    // policy as every other surface -- WP04 T016 step 6 names
                    // "any bulk or import path" explicitly, and an import that
                    // can end an issue in the completion column with open
                    // blockers is the sharpest form of that.
                    //
                    // It **records** the acknowledgement rather than refusing, and
                    // the asymmetry is deliberate. There is no interactive
                    // confirmation available mid-import, and refusing would make
                    // `tix import` unusable whenever one issue in a batch carries
                    // a stale blocker -- turning a stale local edge into a
                    // permanently un-syncable board. The user ran the import;
                    // that is the decision, and the event exists to preserve it.
                    // Where a human is present to answer, refusing is right
                    // (`tix move`, `tix edit --status`, `move_issue`); here the
                    // honest record is that the import did it.
                    let guard = crate::commands::mv::blocked_move_guard(
                        config,
                        store,
                        &overwritten,
                        overwritten.status.display(),
                    )?;
                    if let Some(warning) = guard.warning() {
                        overwritten.history.append_now(
                            &crate::storage::actor_identity(),
                            crate::model::HistoryEventKind::BlockedMoveAcknowledged,
                            &format!("imported to {}: {warning}", overwritten.status.display()),
                        );
                    }
                    store.transaction(|| store.update(&filename, &overwritten))?;
                    let backup_label = backup
                        .as_ref()
                        .map(|p| p.display().to_string())
                        .unwrap_or_else(|| "none".to_string());
                    writeln!(
                        out,
                        "overwrote {tool} issue {} \"{}\" (remote newer; backup at {backup_label})",
                        remote.id, overwritten.title
                    )?;
                    handled += 1;
                } else {
                    writeln!(
                        out,
                        "kept {tool} issue {} \"{}\" (local updated later or equal)",
                        remote.id, remote.title
                    )?;
                }
            }
        }
    }
    restore_imported_parents(store, tool, &claims, &imported, &mut report, out)?;
    apply_imported_projects(
        store,
        config,
        tool,
        &project_payloads,
        &located,
        &mut report,
        out,
    )?;
    apply_imported_epics(
        store,
        config,
        tool,
        &epic_payloads,
        &located,
        &mut report,
        out,
    )?;
    writeln!(out, "imported {handled} {tool} issue(s)")?;
    report.handled = handled;
    Ok(report)
}

/// Restore the parent references an import's payload reported.
///
/// A **second pass**, because a payload names a parent by *remote* id and the
/// parent may well be imported after its child. Setting the field while building
/// each issue would therefore succeed or fail depending on the order the remote
/// happened to return, which is the order-dependence NFR-003 forbids.
///
/// Every write goes through [`crate::hierarchy::set_parent`] rather than a field
/// assignment, so an imported reference obeys the same rules as a CLI write: it is
/// validated before anything is written, and a refusal leaves the file
/// byte-identical. T032's note is explicit — "an import that would create a cycle
/// is a defect, not a special case" — and the service is what decides that, not
/// this loop.
///
/// `claims` is `(child remote id, parent remote id)` and `imported` is
/// `(remote id, local number)`. A pair where either side does not resolve becomes a
/// diagnostic rather than a write: a reference to an issue this run did not import
/// is exactly the unresolved-parent state WP05 added a finding for, and
/// manufacturing it here would be this loop's own defect.
fn restore_imported_parents(
    store: &Store,
    tool: Tool,
    claims: &[(String, String)],
    imported: &[(String, u32)],
    report: &mut SyncReport,
    out: &mut dyn Write,
) -> Result<()> {
    for (child_remote, parent_remote) in claims {
        let child = imported
            .iter()
            .find(|(id, _)| id == child_remote)
            .map(|(_, number)| *number);
        let parent = imported
            .iter()
            .find(|(id, _)| id == parent_remote)
            .map(|(_, number)| *number);
        let (Some(child), Some(parent)) = (child, parent) else {
            report.note_parent(
                MappedParent::Unsupported(RemoteMappingDiagnostic {
                    relation_id: format!("{child_remote}->{parent_remote}"),
                    field: parent_field(tool).to_string(),
                    tool,
                    message: format!(
                        "remote issue {child_remote} reports parent {parent_remote}, \
                         which this import did not create — it may be closed, \
                         filtered out, or in another project; no local reference is \
                         written, so the issue stays parentless rather than \
                         unresolved"
                    ),
                }),
                out,
            )?;
            continue;
        };
        // Through `Store::set_parent`, which resolves, validates with the
        // hierarchy service, writes, and records the one History entry — the
        // same path `tix edit --parent` takes, so an imported reference is
        // indistinguishable from a typed one. A refusal is reported and nothing is
        // written.
        let (child_sel, parent_sel) = (child.to_string(), parent.to_string());
        match store.set_parent(&child_sel, &parent_sel) {
            Ok(_) => writeln!(out, "restored parent of {tool} issue #{child} to #{parent}")?,
            Err(e) => {
                writeln!(
                    out,
                    "could not restore the parent of {tool} issue #{child}: {e}; the \
                     reference was not written"
                )?;
                report.diagnostics.push(RemoteMappingDiagnostic {
                    relation_id: format!("{child}->{parent}"),
                    field: parent_field(tool).to_string(),
                    tool,
                    message: format!(
                        "the remote reports #{child} under #{parent}, but the hierarchy \
                         service refused it: {e}"
                    ),
                });
            }
        }
    }
    Ok(())
}

/// Apply the project associations an import's payloads reported (WP08 T037).
///
/// A **second pass**, like [`restore_imported_parents`], because the association
/// belongs to an issue that must exist locally first and because the order a
/// remote happened to list its issues in must not decide the outcome (T037 step
/// 4). Every payload that found a local issue is in `located`, so an issue created
/// *after* its sibling still gets its memberships.
///
/// ## Every write goes through the project service
///
/// [`Store::associate`] is the same path `tix project add` will take, so
/// uniqueness, reference validation and the one History entry per accepted change
/// are the service's decisions rather than a second membership rule here. An
/// already-present association is the service's idempotent no-op: it writes
/// nothing, appends nothing, and leaves the canonical file byte-stable — which is
/// what makes a repeated import a true no-op (T037 step 3).
///
/// ## Matching is by id, and only by id
///
/// `resolve_project_id` also accepts a project *name*, because a human selects
/// projects by name. An import must not: a name is a display label (C-002), so a
/// remote that renames a project — or a local registry whose name happens to
/// equal the remote's id — would resolve to the wrong project, or to a second
/// association for a membership that is already there. The registry is therefore
/// consulted by **key** before the service is called, which both enforces
/// id-only matching and makes the refusal diagnosable instead of an
/// `unknown_project` error string.
///
/// ## An unknown id is diagnosed, never written
///
/// Writing the association would manufacture a dangling reference — one per
/// issue, per run, for a project the registry has never heard of: the "missing
/// reference storm" T037 step 4 names. The remote keeps the association, the
/// local file is untouched, and the diagnostic names the field, the tool and the
/// id (C-005). The registry itself is **never** written: the local
/// `[projects.<id>]` section is this repository's configuration (C-001) and not
/// the remote's to rewrite, which is also why there is no window in which a
/// partially written registry could exist.
///
/// A payload the import skipped — an issue whose remote state is not a column on
/// the board — was already reported on its own line and has no local issue to
/// attach a membership to, so it is passed over here rather than diagnosed twice.
fn apply_imported_projects(
    store: &Store,
    config: &Config,
    tool: Tool,
    payloads: &[(String, Vec<RemoteProject>)],
    located: &[(String, u32)],
    report: &mut SyncReport,
    out: &mut dyn Write,
) -> Result<()> {
    if payloads.is_empty() {
        return Ok(());
    }
    // Resolved once, with a **no-op** warning sink: this is the same resolution the
    // adapters use, and quoting the project name the remote reported is the one
    // place remote output reaches a diagnostic, so it has to be scrubbed. The sink
    // is silent because `token::resolve` already warned on the adapter's behalf for
    // this run — warning twice per import would be noise, not extra safety.
    let secret = token::resolve(tool, config, &token::RealEnv, &mut |_| {})
        .secret()
        .map(str::to_string);
    for (remote_id, projects) in payloads {
        let Some(local_number) = located
            .iter()
            .find(|(id, _)| id == remote_id)
            .map(|(_, number)| *number)
        else {
            continue;
        };
        for project in projects {
            let project_id = match map_project_from_remote(tool, project) {
                MappedProject::Remote { value, .. } => value,
                MappedProject::Unsupported(mut diagnostic) => {
                    scrub_diagnostic(&mut diagnostic, secret.as_deref());
                    report.note_project(MappedProject::Unsupported(diagnostic), out)?;
                    continue;
                }
            };
            if !config.projects.contains_key(project_id.as_str()) {
                let mut diagnostic = RemoteMappingDiagnostic {
                    relation_id: format!("{local_number}->{project_id}"),
                    field: project_field(tool).to_string(),
                    tool,
                    message: format!(
                        "the remote reports #{local_number} in project `{project_id}`{}, \
                         which this repository's registry does not declare; nothing was \
                         written — the association stays on the remote and no missing \
                         reference was created locally",
                        project
                            .name
                            .as_deref()
                            .map(|name| format!(" (`{name}`)"))
                            .unwrap_or_default()
                    ),
                };
                scrub_diagnostic(&mut diagnostic, secret.as_deref());
                report.note_project(MappedProject::Unsupported(diagnostic), out)?;
                continue;
            }
            match store.associate(&local_number.to_string(), &project_id) {
                Ok(applied) if applied.changed => {
                    writeln!(
                        out,
                        "associated {tool} issue #{local_number} with {}",
                        crate::projects::association_detail(&project_id, true)
                    )?;
                }
                // Already associated: the service's no-op, so nothing was written and
                // no History entry was appended. Silent on purpose — a report line per
                // unchanged association would make every re-import look like work.
                Ok(_) => {}
                Err(error) => {
                    let mut diagnostic = RemoteMappingDiagnostic {
                        relation_id: format!("{local_number}->{project_id}"),
                        field: project_field(tool).to_string(),
                        tool,
                        message: format!(
                            "the remote reports #{local_number} in project `{project_id}`, \
                             but the project service refused the association: {error}; the \
                             local association list is unchanged"
                        ),
                    };
                    scrub_diagnostic(&mut diagnostic, secret.as_deref());
                    report.note_project(MappedProject::Unsupported(diagnostic), out)?;
                }
            }
        }
    }
    Ok(())
}

/// Apply the epic references an import's payloads reported (WP08, mission
/// `epics-work-items-01M3BYW4`).
///
/// A **second pass**, like [`apply_imported_projects`], because the reference
/// belongs to an issue that must exist locally first and because the order a remote
/// happened to list its issues in must not decide the outcome. Every payload that
/// found a local issue is in `located`, so an issue created *after* its sibling
/// still gets its references.
///
/// ## Every write goes through the epic service
///
/// [`Store::reference_epic`] is the same path `tix edit --add-epic` takes, so
/// uniqueness, reference validation and the one History entry per accepted change
/// are the service's decisions rather than a second reference rule here. An
/// already-present reference is the service's idempotent no-op: it writes nothing,
/// appends nothing, and leaves the canonical file byte-stable — which is what makes
/// a repeated import a true no-op (T039 step 3).
///
/// ## Matching is by id, and only by id
///
/// `resolve_epic_id` also accepts an epic *name*, because a human selects epics by
/// name. An import must not: a name is a display label (C-003), so a remote that
/// renames an epic — or a local registry whose name happens to equal the remote's id
/// — would resolve to the wrong epic, or to a second reference for a reference that
/// is already there. The registry is therefore consulted by **key** before the
/// service is called, which both enforces id-only matching and makes the refusal
/// diagnosable instead of an `unknown_epic` error string.
///
/// ## An unknown id is diagnosed, never written
///
/// Writing the reference would manufacture a dangling reference — one per issue, per
/// run, for an epic the registry has never heard of: the "missing reference storm"
/// T039 step 4 names. The remote keeps the reference, the local file is untouched,
/// and the diagnostic names the field, the tool and the id (C-007). The registry
/// itself is **never** written: the local `[epics.<id>]` section is this repository's
/// configuration (C-004) and not the remote's to rewrite, which is also why there is
/// no window in which a partially written registry could exist.
///
/// A payload the import skipped — an issue whose remote state is not a column on the
/// board — was already reported on its own line and has no local issue to attach a
/// reference to, so it is passed over here rather than diagnosed twice.
fn apply_imported_epics(
    store: &Store,
    config: &Config,
    tool: Tool,
    payloads: &[(String, Vec<RemoteEpic>)],
    located: &[(String, u32)],
    report: &mut SyncReport,
    out: &mut dyn Write,
) -> Result<()> {
    if payloads.is_empty() {
        return Ok(());
    }
    // Resolved once, with a **no-op** warning sink: the same resolution the adapters
    // use, and quoting the epic name the remote reported is the one place remote
    // output reaches a diagnostic, so it has to be scrubbed. The sink is silent
    // because `token::resolve` already warned on the adapter's behalf for this run.
    let secret = token::resolve(tool, config, &token::RealEnv, &mut |_| {})
        .secret()
        .map(str::to_string);
    for (remote_id, epics) in payloads {
        let Some(local_number) = located
            .iter()
            .find(|(id, _)| id == remote_id)
            .map(|(_, number)| *number)
        else {
            continue;
        };
        for epic in epics {
            let epic_id = match map_epic_from_remote(tool, epic) {
                MappedEpic::Remote { value, .. } => value,
                MappedEpic::Unsupported(mut diagnostic) => {
                    scrub_diagnostic(&mut diagnostic, secret.as_deref());
                    report.note_epic(MappedEpic::Unsupported(diagnostic), out)?;
                    continue;
                }
            };
            if !config.epics.contains_key(epic_id.as_str()) {
                let mut diagnostic = RemoteMappingDiagnostic {
                    relation_id: format!("{local_number}->{epic_id}"),
                    field: EPIC_FIELD.to_string(),
                    tool,
                    message: format!(
                        "the remote reports #{local_number} in epic `{epic_id}`{}, which \
                         this repository's registry does not declare; nothing was written \
                         — the reference stays on the remote and no missing reference \
                         was created locally",
                        epic.name
                            .as_deref()
                            .map(|name| format!(" (`{name}`)"))
                            .unwrap_or_default()
                    ),
                };
                scrub_diagnostic(&mut diagnostic, secret.as_deref());
                report.note_epic(MappedEpic::Unsupported(diagnostic), out)?;
                continue;
            }
            match store.reference_epic(&local_number.to_string(), &epic_id) {
                Ok(applied) if applied.changed => {
                    writeln!(
                        out,
                        "referenced {tool} issue #{local_number} with {}",
                        crate::epics::reference_detail(&epic_id, true)
                    )?;
                }
                // Already referenced: the service's no-op, so nothing was written and
                // no History entry was appended. Silent on purpose — a report line per
                // unchanged reference would make every re-import look like work.
                Ok(_) => {}
                Err(error) => {
                    let mut diagnostic = RemoteMappingDiagnostic {
                        relation_id: format!("{local_number}->{epic_id}"),
                        field: EPIC_FIELD.to_string(),
                        tool,
                        message: format!(
                            "the remote reports #{local_number} in epic `{epic_id}`, but \
                             the epic service refused the reference: {error}; the local \
                             reference list is unchanged"
                        ),
                    };
                    scrub_diagnostic(&mut diagnostic, secret.as_deref());
                    report.note_epic(MappedEpic::Unsupported(diagnostic), out)?;
                }
            }
        }
    }
    Ok(())
}

/// Whether a computed **remote** status conveys "done" in that tracker's own
/// vocabulary.
///
/// Deliberately **not** the completion decision. `closed` is GitLab's word and
/// `Done` is Linear's; neither is a local column name, so this cannot be a
/// category question, and routing it through the service would mean asking the
/// service about a string from a different vocabulary.
///
/// It used to decide *local* completion at the export call sites, by mapping the
/// local status out to a remote string and testing that — a round trip that can
/// disagree with the category rule on any board with a category_map. Those call
/// sites now ask \`workflow::is_completed\` about the local issue (C-004), and this
/// function keeps only the narrower job it can actually do: telling an adapter
/// whether its own status update already closed the remote issue.
fn remote_ref(tool: Tool, issue: &Issue) -> Option<&str> {
    match tool {
        Tool::GitLab => issue.gitlab_id.as_deref(),
        Tool::Linear => issue.linear_id.as_deref(),
    }
}

/// Build and configure the adapter for `tool`: resolves the token with env
/// precedence, validates the `[export]` target section, and returns the
/// tool-specific adapter wired to a [`ProcessRunner`].
fn adapter_for(tool: Tool, config: &Config) -> Result<Box<dyn TrackerAdapter>> {
    // The contract's warning starts with "warning:" — no `tix:` prefix.
    let mut warn = |w: &str| eprintln!("{w}");
    let resolution = token::resolve(tool, config, &token::RealEnv, &mut warn);
    let secret = resolution.secret().map(str::to_string);
    match tool {
        Tool::GitLab => {
            let rc = config.export.gitlab.as_ref().ok_or_else(|| {
                TixError::Config("no `[export.gitlab]` section in tix.toml — run `tix init --with gitlab` or edit tix.toml".to_string())
            })?;
            let project = rc.project.clone().ok_or_else(|| {
                TixError::Config("`[export.gitlab].project` is not set — add `project = \"acme/tix\"` to tix.toml".to_string())
            })?;
            Ok(Box::new(glab::GitLabAdapter::new(
                ProcessRunner,
                secret,
                rc.base_url.clone(),
                project,
            )))
        }
        Tool::Linear => {
            let rc = config.export.linear.as_ref().ok_or_else(|| {
                TixError::Config("no `[export.linear]` section in tix.toml — run `tix init --with linear` or edit tix.toml".to_string())
            })?;
            let team = rc.team.clone().ok_or_else(|| {
                TixError::Config(
                    "`[export.linear].team` is not set — add `team = \"Eng\"` to tix.toml"
                        .to_string(),
                )
            })?;
            Ok(Box::new(linear::LinearAdapter::new(
                ProcessRunner,
                secret,
                team,
            )))
        }
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn target_parsing_accepts_only_the_two_contract_targets() {
        assert_eq!(Tool::from_target("gitlab").unwrap(), Tool::GitLab);
        assert_eq!(Tool::from_target("linear").unwrap(), Tool::Linear);
        assert!(Tool::from_target("github").is_err());
        assert_eq!(Tool::GitLab.token_var(), "GITLAB_TOKEN");
        assert_eq!(Tool::Linear.token_var(), "LINEAR_TOKEN");
        assert_eq!(Tool::GitLab.binary(), "glab");
        assert_eq!(Tool::Linear.binary(), "linear-cli");
    }

    #[test]
    fn gitlab_status_mapping() {
        let config = Config::default();
        assert_eq!(
            local_to_remote_status(Tool::GitLab, "todo", &config),
            "opened"
        );
        assert_eq!(
            local_to_remote_status(Tool::GitLab, "done", &config),
            "closed"
        );
        assert_eq!(
            remote_to_local_status(Tool::GitLab, "opened", &config),
            "todo"
        );
        assert_eq!(
            remote_to_local_status(Tool::GitLab, "closed", &config),
            "done"
        );
        assert_eq!(
            remote_to_local_status(Tool::GitLab, "anything-else", &config),
            "todo"
        );
    }

    #[test]
    fn linear_status_mapping() {
        let config = Config::default();
        assert_eq!(
            local_to_remote_status(Tool::Linear, "todo", &config),
            "todo"
        );
        assert_eq!(
            local_to_remote_status(Tool::Linear, "in review", &config),
            "todo"
        );
        assert_eq!(
            local_to_remote_status(Tool::Linear, "done", &config),
            "Done"
        );
        assert_eq!(
            remote_to_local_status(Tool::Linear, "In Progress", &config),
            "in progress"
        );
        assert_eq!(
            remote_to_local_status(Tool::Linear, "Done", &config),
            "done"
        );
        assert_eq!(
            remote_to_local_status(Tool::Linear, "Unknown", &config),
            "todo"
        );
    }

    #[test]
    fn days_from_civil_roundtrips_civil_from_days() {
        // spot-check independent epoch anchors (known values)
        assert_eq!(days_from_civil(1970, 1, 1), 0);
        assert_eq!(days_from_civil(2000, 1, 1), 10957);
        assert_eq!(days_from_civil(1970, 1, 2), 1);
        assert_eq!(days_from_civil(2026, 5, 11), 20584);
    }

    #[test]
    fn date_to_epoch_days_parses_only_yyyymmdd() {
        assert_eq!(date_to_epoch_days("1970-01-01"), Some(0));
        assert_eq!(date_to_epoch_days("2026-05-11"), Some(20_584));
        assert_eq!(date_to_epoch_days("not-a-date"), None);
        assert_eq!(date_to_epoch_days("2026-13-01"), None);
        assert_eq!(date_to_epoch_days("2026-05-11T10:00:00"), None);
    }

    #[test]
    fn iso_to_epoch_secs_accepts_contract_timestamp_shapes() {
        let day = days_from_civil(2026, 5, 11) * 86_400;
        assert_eq!(iso_to_epoch_secs("2026-05-11T00:00:00Z"), Some(day));
        assert_eq!(iso_to_epoch_secs("2026-05-11 00:00:00"), Some(day));
        assert_eq!(iso_to_epoch_secs("2026-05-11T00:00:00.123Z"), Some(day));
        assert_eq!(
            iso_to_epoch_secs("2026-05-11T00:00:00+02:00"),
            Some(day - 7200)
        );
        assert_eq!(
            iso_to_epoch_secs("2026-05-11T00:00:00-05:30"),
            Some(day + 19_800)
        );
        assert_eq!(
            iso_to_epoch_secs("2026-05-11T10:30:00Z"),
            Some(day + 37_800)
        );
        assert_eq!(iso_to_epoch_secs("garbage"), None);
    }

    #[test]
    fn remote_newer_wins_only_when_strictly_after_local_end_of_day() {
        // local `updated` = 2026-05-11 is interpreted as end of day.
        assert!(is_remote_newer("2026-05-12T00:00:00Z", "2026-05-11"));
        assert!(!is_remote_newer("2026-05-11 13:00:00", "2026-05-11"));
        assert!(!is_remote_newer("2026-05-11T23:59:59Z", "2026-05-11"));
        assert!(!is_remote_newer("2026-05-10T23:59:59Z", "2026-05-11"));
        // unparseable remote timestamp keeps the local issue
        assert!(!is_remote_newer("not-a-time", "2026-05-11"));
    }

    #[test]
    fn scrub_replaces_secret_everywhere_and_preserves_text() {
        assert_eq!(
            scrub_secret("token=sekrit end", "sekrit"),
            "token=<token> end"
        );
        assert_eq!(
            scrub_secret("token=sekrit token=sekrit", "sekrit"),
            "token=<token> token=<token>"
        );
        assert_eq!(scrub_secret("no secret here", "sekrit"), "no secret here");
        assert_eq!(scrub_secret("empty secret", ""), "empty secret");
    }

    // ---- WP07 T029: the relationship mapping seam ----

    fn rel(kind: crate::relationships::RelationKind) -> crate::relationships::Relationship {
        let mut r = crate::relationships::Relationship::new(1, 2, kind, "Ship it");
        r.id = "rel_TEST".to_string();
        r
    }

    /// Every relationship either maps or diagnoses, and the diagnostic
    /// distinguishes the reasons (T029 step 5, re-pointed once Linear's
    /// `relations add` was verified).
    ///
    /// - `blocks`/`blocked_by` for **Linear** — expressible in the model and
    ///   drivable from the CLI, so they **map**, carrying the target's remote
    ///   identifier.
    /// - `blocks`/`blocked_by` for **GitLab** — expressible in the model but the
    ///   CLI is **verified to have no relation command at all** (tix #1354), so it
    ///   diagnoses and says *that*, never "not verified".
    /// - `related`/`duplicates` — no remote field at all.
    #[test]
    fn every_relationship_maps_only_where_the_wire_is_verified_and_otherwise_diagnoses() {
        for tool in [Tool::GitLab, Tool::Linear] {
            for kind in [
                crate::relationships::RelationKind::Blocks,
                crate::relationships::RelationKind::BlockedBy,
                crate::relationships::RelationKind::Related,
                crate::relationships::RelationKind::Duplicates,
            ] {
                let model_supports = matches!(
                    kind,
                    crate::relationships::RelationKind::Blocks
                        | crate::relationships::RelationKind::BlockedBy
                );
                match map_relation_to_remote(tool, &rel(kind), Some("ENG-42")) {
                    MappedRelation::Remote { field, value } => {
                        assert!(
                            model_supports && RELATION_WIRE_VERIFIED.contains(&tool),
                            "{tool}/{kind} mapped, so the tool must model the kind and \
                             be on the verified wire"
                        );
                        assert_ne!(field, "");
                        if tool == Tool::Linear {
                            assert_eq!(
                                value, "ENG-42",
                                "Linear sends the target's remote identifier"
                            );
                        } else {
                            assert!(value.contains('#'));
                        }
                    }
                    MappedRelation::Unsupported(d) => {
                        assert!(
                            !RELATION_WIRE_VERIFIED.contains(&tool) || !model_supports,
                            "{tool}/{kind} is on the verified wire and modelled, so it \
                             must map, not diagnose"
                        );
                        assert_eq!(d.tool, tool, "the diagnostic names the tool");
                        assert_eq!(d.relation_id, "rel_TEST");
                        assert!(
                            !d.field.is_empty(),
                            "the diagnostic must name the specific field: {d}"
                        );
                        assert!(d.to_string().contains(&d.field), "and print it: {d}");
                        if model_supports {
                            assert!(
                                RELATION_CLI_ABSENT.contains(&tool)
                                    && d.message.contains("exposes no issue-relation command")
                                    && !d.message.contains("not verified"),
                                "{tool}/{kind}: a model-supported kind on an unverified \
                                 tool must name the real reason; a CLI verified to have \
                                 no relation command must say so, not 'not verified': {d}"
                            );
                        } else {
                            assert!(
                                !d.message.contains("not verified"),
                                "{tool}/{kind}: a kind with no remote field must not \
                                 blame an unverified verb: {d}"
                            );
                        }
                    }
                }
            }
        }
    }

    /// A blocking edge whose target has no remote reference is **reported, never
    /// guessed** (C-005): Linear's `relations add` needs the target's remote
    /// identifier, and inventing one would be worse than a diagnostic.
    #[test]
    fn a_relation_without_a_remote_target_is_reported_not_guessed() {
        let MappedRelation::Unsupported(d) = map_relation_to_remote(
            Tool::Linear,
            &rel(crate::relationships::RelationKind::Blocks),
            None,
        ) else {
            panic!("a missing target must not map");
        };
        assert_eq!(d.tool, Tool::Linear);
        assert_eq!(d.field, "blocks");
        assert!(
            d.message.contains("#2") && d.message.contains("not been exported"),
            "the diagnostic names the target and why: {d}"
        );
    }

    /// The forward and reverse directions agree about the verified list.
    ///
    /// The reverse direction must **not** invent an edge from a payload the forward
    /// direction would never have written — otherwise an import could create a
    /// relationship the export never made, which is the mirror image of the silent
    /// drop the contract forbids. So it maps exactly when the wire is verified.
    #[test]
    fn the_reverse_direction_maps_exactly_when_the_wire_is_verified() {
        for tool in [Tool::GitLab, Tool::Linear] {
            let field = match tool {
                Tool::GitLab => "blocking",
                Tool::Linear => "blocks",
            };
            match map_relation_from_remote(tool, field, "blocks #2", "rel_TEST") {
                MappedRelation::Remote { .. } => assert!(
                    RELATION_WIRE_VERIFIED.contains(&tool),
                    "{tool}: the reverse direction mapped, so the wire must be verified"
                ),
                MappedRelation::Unsupported(d) => {
                    assert!(
                        !RELATION_WIRE_VERIFIED.contains(&tool),
                        "{tool}: the wire is verified, so the reverse direction must map"
                    );
                    assert_eq!(d.tool, tool);
                    assert_ne!(d.relation_id, "");
                }
            }
        }
    }

    /// A remote payload the export could not have written is **ignored with a
    /// diagnostic**, never turned into a local edge.
    ///
    /// The alternative — coercing an unrecognised field to a default kind — would
    /// let an import invent a relationship the export never made, which is the
    /// mirror image of silently dropping a local one.
    #[test]
    fn an_unrecognised_remote_relation_field_never_becomes_a_local_edge() {
        for tool in [Tool::GitLab, Tool::Linear] {
            for (field, value) in [
                ("parent", "#2"),
                ("blocks", "not-a-number"),
                ("whatever", ""),
            ] {
                match map_relation_from_remote(tool, field, value, "rel_X") {
                    MappedRelation::Remote { .. } => {
                        panic!("{tool}: `{field}={value}` must not become a local edge")
                    }
                    MappedRelation::Unsupported(d) => {
                        assert_eq!(d.tool, tool);
                        assert_eq!(d.field, field, "the diagnostic names the field");
                    }
                }
            }
        }
    }

    /// The two adapters cannot drift: the seam is one function, keyed on `Tool`
    /// (T033 step 5, and T029's note).
    ///
    /// Asserted by construction — a single `map_relation_to_remote` serves both —
    /// and pinned here so adding a tracker-specific branch to one of them is a
    /// red test rather than a silent divergence.
    #[test]
    fn both_trackers_share_one_mapping_seam() {
        let source = include_str!("mod.rs");
        let fns = [
            "pub fn map_relation_to_remote",
            "pub fn map_relation_from_remote",
        ];
        for f in fns {
            assert_eq!(
                source.matches(&format!("{f}(")).count(),
                1,
                "{f} must be *defined* exactly once, in this module, for both \
                 trackers — a doc comment naming it is not a second implementation"
            );
        }
        // And neither adapter file may define its own copy. `include_str!` needs a
        // literal, so the pair is spelled out rather than looped over.
        for (name, text) in [
            ("glab.rs", include_str!("glab.rs")),
            ("linear.rs", include_str!("linear.rs")),
        ] {
            assert!(
                !text.contains("fn map_relation_to_remote")
                    && !text.contains("fn map_relation_from_remote"),
                "{name} must not define its own mapping seam; the shared one is \\
                 keyed on `Tool` precisely so the two cannot diverge"
            );
        }
    }

    /// A `SyncReport` records the count and the diagnostics together, so a caller
    /// cannot report success while quietly dropping a relationship.
    #[test]
    fn a_sync_report_carries_both_the_count_and_the_diagnostics() {
        let mut report = SyncReport::default();
        let mut sink: Vec<u8> = Vec::new();
        report
            .note(
                map_relation_to_remote(
                    Tool::GitLab,
                    &rel(crate::relationships::RelationKind::Related),
                    None,
                ),
                &mut sink,
            )
            .unwrap();
        report
            .note(
                map_relation_to_remote(
                    Tool::GitLab,
                    &rel(crate::relationships::RelationKind::Blocks),
                    None,
                ),
                &mut sink,
            )
            .unwrap();
        // Both are diagnostics: GitLab is not wire-verified, so the mapped
        // branch is unreachable and the count cannot be 1.
        let expected = if RELATION_WIRE_VERIFIED.contains(&Tool::GitLab) {
            1
        } else {
            2
        };
        assert_eq!(
            report.diagnostics.len(),
            expected,
            "the report records every relation the tool cannot carry"
        );
        assert_eq!(report.handled, 0, "no issues were handled here");
        // It is on the human stream too, so the count and the output agree.
        let text = String::from_utf8(sink).unwrap();
        assert!(
            text.contains("cannot represent"),
            "the stream says so: {text}"
        );
    }
    // ---- WP07 T032/T033: completion comes from the service, nowhere else ----

    /// A board whose `category_map` puts `completed` on `shipped` while
    /// `done_column` is `done` — so the two disagree, and a name comparison picks the
    /// wrong one. Every assertion below is vacuous on the default board, which is why
    /// this fixture exists rather than `Config::default()`.
    fn split_completion_config() -> Config {
        Config {
            kanban: crate::config::KanbanSection {
                configurations: indexmap::IndexMap::from([(
                    "default".to_string(),
                    crate::config::BoardConfiguration {
                        columns: vec!["todo".into(), "shipped".into(), "done".into()],
                        done_column: Some("done".to_string()),
                        category_map: indexmap::IndexMap::from([
                            ("todo".to_string(), "unstarted".to_string()),
                            ("shipped".to_string(), "completed".to_string()),
                            ("done".to_string(), "active".to_string()),
                        ]),
                        ..Default::default()
                    },
                )]),
            },
            ..Config::default()
        }
    }

    #[test]
    fn t032_a_remote_closed_state_maps_to_the_services_completion_column() {
        // Not to `done_column`. The remote's `closed` must round-trip to the column
        // the *service* calls complete, or export and import disagree with each other
        // and with the board.
        let config = split_completion_config();
        assert_eq!(
            remote_to_local_status(Tool::GitLab, "closed", &config),
            "shipped",
            "a closed GitLab issue belongs in the column that is actually complete"
        );
        assert_eq!(
            remote_to_local_status(Tool::Linear, "Done", &config),
            "shipped"
        );
    }

    #[test]
    fn t032_export_closes_the_column_the_service_calls_complete() {
        // The other direction. A name comparison exported `shipped` as *open* and
        // closed `done` instead — the tracker and the board disagreeing about the same
        // issue in both directions at once.
        let config = split_completion_config();
        assert_eq!(
            local_to_remote_status(Tool::GitLab, "shipped", &config),
            "closed"
        );
        assert_eq!(
            local_to_remote_status(Tool::GitLab, "done", &config),
            "opened"
        );
        assert_eq!(
            local_to_remote_status(Tool::Linear, "shipped", &config),
            "Done"
        );
    }

    #[test]
    fn t032_a_closed_remote_state_mapped_to_a_canceled_column_is_not_complete() {
        // T033 step 4. `canceled` is terminal but **not** complete (contract §4), so
        // an export that sends a `canceled` column as closed would be claiming the
        // work is finished when it was abandoned. The local side is the service's
        // answer, so it says no.
        let mut config = split_completion_config();
        config
            .kanban
            .configurations
            .get_mut("default")
            .unwrap()
            .category_map
            .insert("done".to_string(), "canceled".to_string());
        let board = config.default_config();
        // `shipped` is still `completed`, so it still exports as closed…
        assert_eq!(
            local_to_remote_status(Tool::GitLab, "shipped", &config),
            "closed"
        );
        // …and `done` is now `canceled`, which is terminal and not complete, so it does
        // not. The remote has only two states, so the honest outcome is that `canceled`
        // cannot be represented distinctly — and the local definition is what decides,
        // not the remote's vocabulary.
        assert!(
            !is_done_column(board, "done", &config),
            "a canceled column is not locally complete"
        );
    }

    #[test]
    fn t032_the_existing_round_trips_are_unchanged() {
        // T032 step 5: this is a refactor of *where the decision comes from*, not a
        // protocol change. The default board's behaviour must be identical.
        let config = Config::default();
        assert_eq!(
            local_to_remote_status(Tool::GitLab, "done", &config),
            "closed"
        );
        assert_eq!(
            local_to_remote_status(Tool::GitLab, "todo", &config),
            "opened"
        );
        assert_eq!(
            remote_to_local_status(Tool::GitLab, "closed", &config),
            "done"
        );
        assert_eq!(
            remote_to_local_status(Tool::Linear, "Done", &config),
            "done"
        );
        // "In Progress" case-insensitively matches the board's `in progress` column,
        // and a name match wins over the first column. The first draft of this
        // assertion expected `todo` — which is the *first* column, and therefore the
        // answer when no name matches. It was asserting the opposite rule to the one
        // it claimed to pin.
        assert_eq!(
            remote_to_local_status(Tool::Linear, "In Progress", &config),
            "in progress",
            "a name match wins over the first column"
        );
        assert_eq!(
            remote_to_local_status(Tool::Linear, "No Such State", &config),
            "todo",
            "and with no match at all, the first column"
        );
    }

    #[test]
    fn t032_the_sync_seam_holds_no_local_completion_definition() {
        // T032 step 4, as a structural guard. The module header says a second local
        // definition is a C-004 defect, and this is what keeps that from being
        // "improved" back in: the seam may only *translate* a remote state word, and
        // the completion test may only come from the service.
        let source = include_str!("mod.rs");
        // Assembled from fragments so this assertion does not match **itself**: the
        // first version spelled the forbidden name out in full, so the very line
        // asserting its absence satisfied the check. That is the grep equivalent of a
        // test that proves itself, and it was found because the test went red while
        // the function was, in fact, absent.
        let forbidden = ["fn remote", "status_is_done"].concat();
        assert!(
            !source.contains(&forbidden),
            "the dead second definition is removed and must not come back"
        );
        // The only local completion question in the module is the service call.
        let uses_service = source.matches("WorkflowCategory::is_complete").count();
        assert!(
            uses_service >= 2,
            "both `is_done_column` and `completion_column` must ask the service, found \
             {uses_service} uses"
        );
    }

    // ------------------------------------------------------------------
    // WP08 (mission first-class-projects-01M3BYBW) — project associations
    // ------------------------------------------------------------------

    /// A representable association maps, and the reverse direction is
    /// **local**-shaped: the frontmatter key and the id, not a copy of the tool's
    /// field name (T035 step 1).
    #[test]
    fn t035_a_project_association_maps_back_to_its_local_id() {
        for tool in [Tool::GitLab, Tool::Linear] {
            let remote = RemoteProject {
                id: "p-1".to_string(),
                name: Some("One".to_string()),
            };
            match map_project_from_remote(tool, &remote) {
                MappedProject::Remote { field, value } => {
                    assert_eq!(field, crate::projects::PROJECTS_KEY);
                    assert_eq!(value, "p-1", "the id, never the remote's name");
                }
                MappedProject::Unsupported(d) => {
                    panic!("{tool}: a reported id must map back: {d}")
                }
            }
        }
    }

    /// Every association diagnoses on both trackers, and the diagnostic names the
    /// **field**, the **tool** and the issue — the three things that make it
    /// actionable rather than a shrug (T035 step 6, C-005).
    ///
    /// Written so it still holds if a tracker joins `PROJECT_WIRE_VERIFIED`: the
    /// mapped branch is then the assertion, not the diagnostic's.
    #[test]
    fn t035_every_project_association_diagnoses_with_its_field_its_tool_and_its_reason() {
        for tool in [Tool::GitLab, Tool::Linear] {
            match map_project_to_remote(tool, 3, "p-7") {
                MappedProject::Remote { field, value } => {
                    assert!(
                        PROJECT_WIRE_VERIFIED.contains(&tool),
                        "{tool}: an association mapped without a verified membership field"
                    );
                    assert_eq!(field, project_field(tool));
                    assert_eq!(value, "p-7");
                }
                MappedProject::Unsupported(d) => {
                    assert_eq!(d.tool, tool, "the diagnostic names the tool");
                    assert_eq!(d.field, project_field(tool), "and the field");
                    assert_eq!(
                        d.relation_id, "3->p-7",
                        "and the issue and the association it is about"
                    );
                    let text = d.to_string();
                    for needle in [d.field.as_str(), "p-7", "#3"] {
                        assert!(text.contains(needle), "`{needle}` missing from: {text}");
                    }
                    // Neither CLI has a membership verb to wait for, so the message
                    // must not promise one — the same distinction
                    // `RELATION_CLI_ABSENT` draws.
                    assert!(
                        !d.message.contains("not verified"),
                        "{tool}: there is no membership verb to verify: {text}"
                    );
                }
            }
        }
        // The reasons are per tool because the two CLIs differ, and they say which.
        assert!(project_absence_reason(Tool::GitLab).contains("--project"));
        assert!(project_absence_reason(Tool::Linear).contains("one `project`"));
        assert_ne!(
            project_absence_reason(Tool::GitLab),
            project_absence_reason(Tool::Linear)
        );
    }

    /// An association with no id is a repair job, not a remote capability gap, and
    /// the local entry is not quietly sent as somebody else's project.
    #[test]
    fn t035_an_association_with_no_id_is_diagnosed_and_kept() {
        for tool in [Tool::GitLab, Tool::Linear] {
            match map_project_to_remote(tool, 4, "   ") {
                MappedProject::Remote { .. } => panic!("{tool}: nothing to send"),
                MappedProject::Unsupported(d) => {
                    assert_eq!(d.tool, tool);
                    assert_eq!(d.field, project_field(tool));
                    assert!(d.message.contains("no id"), "{}", d.message);
                    assert!(
                        d.message.contains("kept locally"),
                        "and says the entry survives: {}",
                        d.message
                    );
                }
            }
        }
    }

    /// A payload's references are read **in order**, in every shape the two trackers
    /// are known to use, and an entry that cannot yield an id is still reported by
    /// name instead of being dropped (T035 step 1, NFR-002 for the order).
    #[test]
    fn t035_remote_project_reading_keeps_order_and_accepts_every_known_shape() {
        let list: serde_json::Value =
            serde_json::from_str(r#"["p-1", {"id": "p-2", "name": "Two"}, 3]"#).unwrap();
        assert_eq!(
            remote_projects(Some(&list)),
            vec![
                RemoteProject {
                    id: "p-1".into(),
                    name: None
                },
                RemoteProject {
                    id: "p-2".into(),
                    name: Some("Two".into())
                },
                RemoteProject {
                    id: "3".into(),
                    name: None
                },
            ],
            "the payload's order is the list's order"
        );
        // Linear's single `project`, under any of the id spellings.
        for raw in [
            r#"{"identifier": "p-9"}"#,
            r#"{"project_id": "p-9"}"#,
            r#""p-9""#,
        ] {
            let value: serde_json::Value = serde_json::from_str(raw).unwrap();
            assert_eq!(
                remote_projects(Some(&value)),
                vec![RemoteProject {
                    id: "p-9".into(),
                    name: None
                }],
                "{raw}"
            );
        }
        // A named entry with no id survives, so the import can report it.
        let named: serde_json::Value =
            serde_json::from_str(r#"[{"name": "Unidentified"}]"#).unwrap();
        assert_eq!(
            remote_projects(Some(&named)),
            vec![RemoteProject {
                id: String::new(),
                name: Some("Unidentified".into())
            }]
        );
        // Absent, null, and shapes carrying nothing at all yield no references.
        assert_eq!(remote_projects(None), [] as [crate::sync::RemoteProject; 0]);
        assert_eq!(
            remote_projects(Some(&serde_json::Value::Null)),
            [] as [crate::sync::RemoteProject; 0]
        );
        assert_eq!(
            remote_projects(Some(&serde_json::json!([true, false]))),
            [] as [crate::sync::RemoteProject; 0]
        );
    }

    /// An entry the remote named but did not identify cannot be matched on, and the
    /// diagnostic quotes the name so a reader can see which project it meant.
    #[test]
    fn t035_a_remote_project_with_no_id_is_diagnosed_never_guessed_at() {
        for tool in [Tool::GitLab, Tool::Linear] {
            let remote = RemoteProject {
                id: "  ".to_string(),
                name: Some("Named but unidentified".to_string()),
            };
            match map_project_from_remote(tool, &remote) {
                MappedProject::Remote { .. } => {
                    panic!("{tool}: an absent id cannot become a local association")
                }
                MappedProject::Unsupported(d) => {
                    assert_eq!(d.tool, tool);
                    assert_eq!(d.field, project_field(tool));
                    assert!(d.message.contains("Named but unidentified"));
                    assert!(d.message.contains("no id"));
                }
            }
        }
    }

    /// A diagnostic built from **remote output** is scrubbed before it is reported
    /// (T036 step 6). The project name is the remote text this seam quotes, which is
    /// exactly how a credential could reach a report.
    #[test]
    fn t036_a_project_diagnostic_built_from_remote_output_is_scrubbed() {
        let mut diagnostic = RemoteMappingDiagnostic {
            relation_id: "1->lin-secret".to_string(),
            field: LINEAR_PROJECT_FIELD.to_string(),
            tool: Tool::Linear,
            message: "the remote reports #1 in project `p-1` (`lin-secret`)".to_string(),
        };
        scrub_diagnostic(&mut diagnostic, Some("lin-secret"));
        assert!(
            diagnostic.message.contains("<token>"),
            "{}",
            diagnostic.message
        );
        assert!(!diagnostic.message.contains("lin-secret"));
        assert!(!diagnostic.relation_id.contains("lin-secret"));

        // With no secret configured there is nothing to redact, and the diagnostic is
        // reported unchanged rather than withheld.
        let mut untouched = RemoteMappingDiagnostic {
            relation_id: "1->p-1".to_string(),
            field: LINEAR_PROJECT_FIELD.to_string(),
            tool: Tool::Linear,
            message: "no secret here".to_string(),
        };
        let expected = untouched.clone();
        scrub_diagnostic(&mut untouched, None);
        assert_eq!(untouched, expected);
    }

    /// Neither tracker sends a membership, both adapters implement the same seam,
    /// and the seam itself is defined once (T036 steps 3 and 5, T038 step 6).
    ///
    /// Structural assertions on purpose: the compiler already requires `set_projects`
    /// on both adapters (it is a required trait method), and these keep a
    /// tracker-specific mapping from being added to one adapter file later.
    #[test]
    fn t036_no_tracker_sends_a_membership_and_both_adapters_share_the_seam() {
        for tool in [Tool::GitLab, Tool::Linear] {
            assert!(!PROJECT_WIRE_VERIFIED.contains(&tool));
            assert!(matches!(
                map_project_to_remote(tool, 1, "p-1"),
                MappedProject::Unsupported(_)
            ));
        }
        let source = include_str!("mod.rs");
        for f in [
            "pub fn map_project_to_remote",
            "pub fn map_project_from_remote",
        ] {
            assert_eq!(
                source.matches(&format!("{f}(")).count(),
                1,
                "{f} must be *defined* exactly once, in this module, for both trackers"
            );
        }
        for (name, text) in [
            ("glab.rs", include_str!("glab.rs")),
            ("linear.rs", include_str!("linear.rs")),
        ] {
            assert!(
                !text.contains("fn map_project_to_remote")
                    && !text.contains("fn map_project_from_remote"),
                "{name} must not define its own mapping seam"
            );
            assert!(
                text.contains("fn set_projects"),
                "{name} must implement the shared membership seam"
            );
        }
    }

    /// The report carries a project diagnostic with the count, on the stream and in
    /// the returned value, so a caller cannot report success while dropping one.
    #[test]
    fn t037_a_report_records_a_project_diagnostic_and_prints_the_field() {
        let mut report = SyncReport::default();
        let mut sink: Vec<u8> = Vec::new();
        report
            .note_project(map_project_to_remote(Tool::GitLab, 2, "p-1"), &mut sink)
            .unwrap();
        assert_eq!(report.diagnostics.len(), 1);
        assert_eq!(report.handled, 0);
        let text = String::from_utf8(sink).unwrap();
        assert!(text.contains("gitlab: projects"), "{text}");
        assert!(text.contains("p-1"), "{text}");
        assert_eq!(report.diagnostics[0].field, GITLAB_PROJECT_FIELD);
    }

    // ---- WP08 T037–T040: the epic-reference mapping seam ----------------

    /// A reported epic id maps back to the local reference key and id, on both
    /// trackers (T037 step 1, C-003).
    #[test]
    fn t037_an_epic_reference_maps_back_to_its_local_id() {
        for tool in [Tool::GitLab, Tool::Linear] {
            let remote = RemoteEpic {
                id: "e-1".to_string(),
                name: Some("One".to_string()),
            };
            match map_epic_from_remote(tool, &remote) {
                MappedEpic::Remote { field, value } => {
                    assert_eq!(field, crate::epics::EPICS_KEY);
                    assert_eq!(value, "e-1", "the id, never the remote's name");
                }
                MappedEpic::Unsupported(d) => {
                    panic!("{tool}: a reported id must map back: {d}")
                }
            }
        }
    }

    /// Every epic reference diagnoses on both trackers, and the diagnostic names the
    /// **field**, the **tool** and the issue — the three things that make it
    /// actionable rather than a shrug (T037 step 6, C-007).
    ///
    /// Written so it still holds if a tracker joins `EPIC_WIRE_VERIFIED`: the mapped
    /// branch is then the assertion, not the diagnostic's.
    #[test]
    fn t037_every_epic_reference_diagnoses_with_its_field_its_tool_and_its_reason() {
        for tool in [Tool::GitLab, Tool::Linear] {
            match map_epic_to_remote(tool, 3, "e-7") {
                MappedEpic::Remote { field, value } => {
                    assert!(
                        EPIC_WIRE_VERIFIED.contains(&tool),
                        "{tool}: a reference mapped without a verified epic field"
                    );
                    assert_eq!(field, EPIC_FIELD);
                    assert_eq!(value, "e-7");
                }
                MappedEpic::Unsupported(d) => {
                    assert_eq!(d.tool, tool, "the diagnostic names the tool");
                    assert_eq!(d.field, EPIC_FIELD, "and the field");
                    assert_eq!(
                        d.relation_id, "3->e-7",
                        "and the issue and the reference it is about"
                    );
                    let text = d.to_string();
                    for needle in [d.field.as_str(), "e-7", "#3"] {
                        assert!(text.contains(needle), "`{needle}` missing from: {text}");
                    }
                    // Neither CLI has an epic verb to wait for, so the message must
                    // not promise one.
                    assert!(
                        !d.message.contains("not verified"),
                        "{tool}: there is no epic verb to verify: {text}"
                    );
                }
            }
        }
        // The reasons are per tool because the two CLIs differ, and they say which.
        assert!(epic_absence_reason(Tool::GitLab).contains("epic_iid"));
        assert!(epic_absence_reason(Tool::Linear).contains("project"));
        assert_ne!(
            epic_absence_reason(Tool::GitLab),
            epic_absence_reason(Tool::Linear)
        );
    }

    /// A reference with no id is a repair job, not a remote capability gap, and the
    /// local entry is not quietly sent as somebody else's epic.
    #[test]
    fn t037_an_epic_reference_with_no_id_is_diagnosed_and_kept() {
        for tool in [Tool::GitLab, Tool::Linear] {
            match map_epic_to_remote(tool, 4, "   ") {
                MappedEpic::Remote { .. } => panic!("{tool}: nothing to send"),
                MappedEpic::Unsupported(d) => {
                    assert_eq!(d.tool, tool);
                    assert_eq!(d.field, EPIC_FIELD);
                    assert!(d.message.contains("no id"), "{}", d.message);
                    assert!(
                        d.message.contains("kept locally"),
                        "and says the entry survives: {}",
                        d.message
                    );
                }
            }
        }
    }

    /// A payload's references are read **in order**, in every shape the two trackers
    /// are known to use, and an entry that cannot yield an id is still reported by
    /// name instead of being dropped (T037 step 1, NFR-002 for the order).
    #[test]
    fn t037_remote_epic_reading_keeps_order_and_accepts_every_known_shape() {
        let list: serde_json::Value =
            serde_json::from_str(r#"["e-1", {"id": "e-2", "name": "Two"}, 3]"#).unwrap();
        assert_eq!(
            remote_epics(Some(&list)),
            vec![
                RemoteEpic {
                    id: "e-1".into(),
                    name: None
                },
                RemoteEpic {
                    id: "e-2".into(),
                    name: Some("Two".into())
                },
                RemoteEpic {
                    id: "3".into(),
                    name: None
                },
            ],
            "the payload's order is the list's order"
        );
        // A single reference, under any of the id spellings.
        for raw in [
            r#"{"identifier": "e-9"}"#,
            r#"{"epic_id": "e-9"}"#,
            r#""e-9""#,
        ] {
            let value: serde_json::Value = serde_json::from_str(raw).unwrap();
            assert_eq!(
                remote_epics(Some(&value)),
                vec![RemoteEpic {
                    id: "e-9".into(),
                    name: None
                }],
                "{raw}"
            );
        }
        // A named entry with no id survives, so the import can report it.
        let named: serde_json::Value =
            serde_json::from_str(r#"[{"name": "Unidentified"}]"#).unwrap();
        assert_eq!(
            remote_epics(Some(&named)),
            vec![RemoteEpic {
                id: String::new(),
                name: Some("Unidentified".into())
            }]
        );
        // Absent, null, and shapes carrying nothing at all yield no references.
        assert_eq!(remote_epics(None), [] as [crate::sync::RemoteEpic; 0]);
        assert_eq!(
            remote_epics(Some(&serde_json::Value::Null)),
            [] as [crate::sync::RemoteEpic; 0]
        );
        assert_eq!(
            remote_epics(Some(&serde_json::json!([true, false]))),
            [] as [crate::sync::RemoteEpic; 0]
        );
    }

    /// An entry the remote named but did not identify cannot be matched on, and the
    /// diagnostic quotes the name so a reader can see which epic it meant.
    #[test]
    fn t037_a_remote_epic_with_no_id_is_diagnosed_never_guessed_at() {
        for tool in [Tool::GitLab, Tool::Linear] {
            let remote = RemoteEpic {
                id: "  ".to_string(),
                name: Some("Named but unidentified".to_string()),
            };
            match map_epic_from_remote(tool, &remote) {
                MappedEpic::Remote { .. } => {
                    panic!("{tool}: an absent id cannot become a local reference")
                }
                MappedEpic::Unsupported(d) => {
                    assert_eq!(d.tool, tool);
                    assert_eq!(d.field, EPIC_FIELD);
                    assert!(d.message.contains("Named but unidentified"));
                    assert!(d.message.contains("no id"));
                }
            }
        }
    }

    /// A diagnostic built from **remote output** is scrubbed before it is reported
    /// (T038 step 6). The epic name is the remote text this seam quotes, which is
    /// exactly how a credential could reach a report.
    #[test]
    fn t038_a_remote_epic_diagnostic_is_scrubbed() {
        let mut diagnostic = RemoteMappingDiagnostic {
            relation_id: "1->lin-secret".to_string(),
            field: EPIC_FIELD.to_string(),
            tool: Tool::Linear,
            message: "the remote reports #1 in epic `e-1` (`lin-secret`)".to_string(),
        };
        scrub_diagnostic(&mut diagnostic, Some("lin-secret"));
        assert!(
            diagnostic.message.contains("<token>"),
            "{}",
            diagnostic.message
        );
        assert!(!diagnostic.message.contains("lin-secret"));
        assert!(!diagnostic.relation_id.contains("lin-secret"));
    }

    /// Neither tracker sends an epic reference, both adapters implement the same
    /// seam, and the seam itself is defined once (T038 step 6).
    ///
    /// Structural assertions on purpose: the compiler already requires `set_epics` on
    /// both adapters (it is a required trait method), and these keep a
    /// tracker-specific mapping from being added to one adapter file later.
    #[test]
    fn t038_no_tracker_sends_an_epic_reference_and_both_adapters_share_the_seam() {
        for tool in [Tool::GitLab, Tool::Linear] {
            assert!(!EPIC_WIRE_VERIFIED.contains(&tool));
            assert!(matches!(
                map_epic_to_remote(tool, 1, "e-1"),
                MappedEpic::Unsupported(_)
            ));
        }
        let source = include_str!("mod.rs");
        for f in ["pub fn map_epic_to_remote", "pub fn map_epic_from_remote"] {
            assert_eq!(
                source.matches(&format!("{f}(")).count(),
                1,
                "{f} must be *defined* exactly once, in this module, for both trackers"
            );
        }
        for (name, text) in [
            ("glab.rs", include_str!("glab.rs")),
            ("linear.rs", include_str!("linear.rs")),
        ] {
            assert!(
                !text.contains("fn map_epic_to_remote")
                    && !text.contains("fn map_epic_from_remote"),
                "{name} must not define its own mapping seam"
            );
            assert!(
                text.contains("fn set_epics"),
                "{name} must implement the shared epic seam"
            );
        }
    }

    /// The report carries an epic diagnostic with the count, on the stream and in the
    /// returned value, so a caller cannot report success while dropping one.
    #[test]
    fn t038_a_report_records_an_epic_diagnostic_and_prints_the_field() {
        let mut report = SyncReport::default();
        let mut sink: Vec<u8> = Vec::new();
        report
            .note_epic(map_epic_to_remote(Tool::GitLab, 2, "e-1"), &mut sink)
            .unwrap();
        assert_eq!(report.diagnostics.len(), 1);
        assert_eq!(report.handled, 0);
        let text = String::from_utf8(sink).unwrap();
        assert!(text.contains("gitlab: epics"), "{text}");
        assert!(text.contains("e-1"), "{text}");
        assert_eq!(report.diagnostics[0].field, EPIC_FIELD);
    }
}