Struct tinkerforge::dual_button_v2_bricklet::DualButtonV2Bricklet

pub struct DualButtonV2Bricklet { /* fields omitted */ }

Two tactile buttons with built-in blue LEDs

Methods

impl DualButtonV2Bricklet

pub const DEVICE_IDENTIFIER: u16

pub const DEVICE_DISPLAY_NAME: &'static str

pub fn new<T: GetRequestSender>(
    uid: &str,
    req_sender: T
) -> DualButtonV2Bricklet

Creates an object with the unique device ID uid. This object can then be used after the IP Connection ip_connection is connected.

pub fn get_response_expected(
    &mut self,
    fun: DualButtonV2BrickletFunction
) -> Result<bool, GetResponseExpectedError>

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by set_response_expected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

See set_response_expected for the list of function ID constants available for this function.

pub fn set_response_expected(
    &mut self,
    fun: DualButtonV2BrickletFunction,
    response_expected: bool
) -> Result<(), SetResponseExpectedError>

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

pub fn set_response_expected_all(&mut self, response_expected: bool)

Changes the response expected flag for all setter and callback configuration functions of this device at once.

pub fn get_api_version(&self) -> [u8; 3]

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

pub fn get_state_changed_callback_receiver(
    &self
) -> ConvertingCallbackReceiver<StateChangedEvent>

This receiver is called whenever a button is pressed.

Possible states for buttons are:

• 0 = pressed
• 1 = released

Possible states for LEDs are:

• 0 = AutoToggleOn: Auto toggle enabled and LED on.
• 1 = AutoToggleOff: Auto toggle enabled and LED off.
• 2 = On: LED on (auto toggle is disabled).
• 3 = Off: LED off (auto toggle is disabled).

This receiver can be enabled with set_state_changed_callback_configuration.

pub fn set_led_state(&self, led_l: u8, led_r: u8) -> ConvertingReceiver<()>

Sets the state of the LEDs. Possible states are:

• 0 = AutoToggleOn: Enables auto toggle with initially enabled LED.
• 1 = AutoToggleOff: Activates auto toggle with initially disabled LED.
• 2 = On: Enables LED (auto toggle is disabled).
• 3 = Off: Disables LED (auto toggle is disabled).

In auto toggle mode the LED is toggled automatically at each press of a button.

If you just want to set one of the LEDs and don't know the current state of the other LED, you can get the state with get_led_state or you can use set_selected_led_state.

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_LED_STATE_AUTO_TOGGLE_ON
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_AUTO_TOGGLE_OFF
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_ON
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_OFF

pub fn get_led_state(&self) -> ConvertingReceiver<LedState>

Returns the current state of the LEDs, as set by set_led_state.

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_LED_STATE_AUTO_TOGGLE_ON
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_AUTO_TOGGLE_OFF
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_ON
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_OFF

pub fn get_button_state(&self) -> ConvertingReceiver<ButtonState>

Returns the current state for both buttons. Possible states are:

• 0 = pressed
• 1 = released

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_BUTTON_STATE_PRESSED
• DUAL_BUTTON_V2_BRICKLET_BUTTON_STATE_RELEASED

pub fn set_selected_led_state(
    &self,
    led: u8,
    state: u8
) -> ConvertingReceiver<()>

Sets the state of the selected LED.

The other LED remains untouched.

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_LED_LEFT
• DUAL_BUTTON_V2_BRICKLET_LED_RIGHT
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_AUTO_TOGGLE_ON
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_AUTO_TOGGLE_OFF
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_ON
• DUAL_BUTTON_V2_BRICKLET_LED_STATE_OFF

pub fn set_state_changed_callback_configuration(
    &self,
    enabled: bool
) -> ConvertingReceiver<()>

If you enable this receiver, the get_state_changed_callback_receiver receiver is triggered every time a button is pressed/released

pub fn get_state_changed_callback_configuration(
    &self
) -> ConvertingReceiver<bool>

Returns the configuration as set by set_state_changed_callback_configuration.

pub fn get_spitfp_error_count(&self) -> ConvertingReceiver<SpitfpErrorCount>

Returns the error count for the communication between Brick and Bricklet.

The errors are divided into

• ACK checksum errors,
• message checksum errors,
• framing errors and
• overflow errors.

The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.

pub fn set_bootloader_mode(&self, mode: u8) -> ConvertingReceiver<u8>

Sets the bootloader mode and returns the status after the requested mode change was instigated.

You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_STATUS_OK
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_STATUS_INVALID_MODE
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_STATUS_NO_CHANGE
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_STATUS_CRC_MISMATCH

pub fn get_bootloader_mode(&self) -> ConvertingReceiver<u8>

Returns the current bootloader mode, see set_bootloader_mode.

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
• DUAL_BUTTON_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT

pub fn set_write_firmware_pointer(&self, pointer: u32) -> ConvertingReceiver<()>

Sets the firmware pointer for write_firmware. The pointer has to be increased by chunks of size 64. The data is written to flash every 4 chunks (which equals to one page of size 256).

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

pub fn write_firmware(&self, data: [u8; 64]) -> ConvertingReceiver<u8>

Writes 64 Bytes of firmware at the position as written by set_write_firmware_pointer before. The firmware is written to flash every 4 chunks.

You can only write firmware in bootloader mode.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

pub fn set_status_led_config(&self, config: u8) -> ConvertingReceiver<()>

Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_OFF
• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_ON
• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS

pub fn get_status_led_config(&self) -> ConvertingReceiver<u8>

Returns the configuration as set by set_status_led_config

Associated constants:

• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_OFF
• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_ON
• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
• DUAL_BUTTON_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS

pub fn get_chip_temperature(&self) -> ConvertingReceiver<i16>

Returns the temperature in °C as measured inside the microcontroller. The value returned is not the ambient temperature!

The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.

pub fn reset(&self) -> ConvertingReceiver<()>

Calling this function will reset the Bricklet. All configurations will be lost.

After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!

pub fn write_uid(&self, uid: u32) -> ConvertingReceiver<()>

Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.

We recommend that you use Brick Viewer to change the UID.

pub fn read_uid(&self) -> ConvertingReceiver<u32>

Returns the current UID as an integer. Encode as Base58 to get the usual string version.

pub fn get_identity(&self) -> ConvertingReceiver<Identity>

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found here. |device_identifier_constant|

Trait Implementations

impl Clone for DualButtonV2Bricklet

fn clone(&self) -> DualButtonV2Bricklet

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.