tiberius-ng 0.13.1

mod auth;
mod config;
mod connection;

mod tls;
#[cfg(any(
    feature = "rustls",
    feature = "native-tls",
    feature = "vendored-openssl"
))]
mod tls_stream;

pub use auth::*;
pub use config::*;
pub(crate) use connection::*;

use crate::tds::codec::RpcValue;
use crate::tds::stream::ReceivedToken;
use crate::{
    result::ExecuteResult,
    tds::{
        codec::{self, IteratorJoin},
        stream::{QueryStream, TokenStream},
    },
    BulkLoadRequest, ColumnFlag, MetaDataColumn, SqlReadBytes, ToSql,
};
use codec::{
    BatchRequest, ColumnData, IsolationLevel, PacketHeader, RpcParam, RpcProcId, TokenRpcRequest,
    TransactionManagerRequest,
};
use enumflags2::BitFlags;
use futures_util::io::{AsyncRead, AsyncWrite};
use futures_util::stream::TryStreamExt;
use std::{borrow::Cow, fmt::Debug};

/// `Client` is the main entry point to the SQL Server, providing query
/// execution capabilities.
///
/// A `Client` is created using the [`Config`], defining the needed
/// connection options and capabilities.
///
/// # Example
///
/// ```no_run
/// # use tiberius::{Config, AuthMethod};
/// use tokio_util::compat::TokioAsyncWriteCompatExt;
///
/// # #[tokio::main]
/// # async fn main() -> Result<(), Box<dyn std::error::Error>> {
/// let mut config = Config::new();
///
/// config.host("0.0.0.0");
/// config.port(1433);
/// config.authentication(AuthMethod::sql_server("SA", "<Mys3cureP4ssW0rD>"));
///
/// let tcp = tokio::net::TcpStream::connect(config.get_addr()).await?;
/// tcp.set_nodelay(true)?;
/// // Client is ready to use.
/// let client = tiberius::Client::connect(config, tcp.compat_write()).await?;
/// # Ok(())
/// # }
/// ```
///
/// # Cancellation safety
///
/// A single [`Client`] drives one connection and one request at a time. If a
/// `query`/`execute`/`simple_query` future — or the result stream it returns —
/// is dropped before the request has been sent in full and the response fully
/// consumed (for example under a `tokio::time::timeout` or a `select!` branch
/// that loses the race), the connection may be left mid-message and out of sync
/// with the server. A cancelled *write* is detected and any further use of that
/// connection fails cleanly; a result stream dropped mid-response cannot be
/// recovered. In both cases the safe course is to drop the `Client` and open a
/// new connection (a connection pool should discard the connection on error)
/// rather than reuse it.
///
/// [`Config`]: struct.Config.html
#[derive(Debug)]
pub struct Client<S: AsyncRead + AsyncWrite + Unpin + Send> {
    pub(crate) connection: Connection<S>,
}

impl<S: AsyncRead + AsyncWrite + Unpin + Send> Client<S> {
    /// Uses an instance of [`Config`] to specify the connection
    /// options required to connect to the database using an established
    /// tcp connection
    ///
    /// Note: `tcp_stream` is a connected stream, so some parts of the `Config`
    /// (such as multi-subnet failover, which selects between resolved
    /// addresses) must be handled while establishing that stream, outside of
    /// this constructor.
    ///
    /// [`Config`]: struct.Config.html
    pub async fn connect(config: Config, tcp_stream: S) -> crate::Result<Client<S>> {
        Ok(Client {
            connection: Connection::connect(config, tcp_stream).await?,
        })
    }

    /// Executes SQL statements in the SQL Server, returning the number rows
    /// affected. Useful for `INSERT`, `UPDATE` and `DELETE` statements. The
    /// `query` can define the parameter placement by annotating them with
    /// `@PN`, where N is the index of the parameter, starting from `1`. If
    /// executing multiple queries at a time, delimit them with `;` and refer to
    /// [`ExecuteResult`] how to get results for the separate queries.
    ///
    /// For mapping of Rust types when writing, see the documentation for
    /// [`ToSql`]. For reading data from the database, see the documentation for
    /// [`FromSql`].
    ///
    /// This API is not quite suitable for dynamic query parameters. In these
    /// cases using a [`Query`] object might be easier.
    ///
    /// # Example
    ///
    /// ```no_run
    /// # use tiberius::Config;
    /// # use tokio_util::compat::TokioAsyncWriteCompatExt;
    /// # use std::env;
    /// # #[tokio::main]
    /// # async fn main() -> Result<(), Box<dyn std::error::Error>> {
    /// # let c_str = env::var("TIBERIUS_TEST_CONNECTION_STRING").unwrap_or(
    /// #     "server=tcp:localhost,1433;integratedSecurity=true;TrustServerCertificate=true".to_owned(),
    /// # );
    /// # let config = Config::from_ado_string(&c_str)?;
    /// # let tcp = tokio::net::TcpStream::connect(config.get_addr()).await?;
    /// # tcp.set_nodelay(true)?;
    /// # let mut client = tiberius::Client::connect(config, tcp.compat_write()).await?;
    /// let results = client
    ///     .execute(
    ///         "INSERT INTO ##Test (id) VALUES (@P1), (@P2), (@P3)",
    ///         &[&1i32, &2i32, &3i32],
    ///     )
    ///     .await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// [`ExecuteResult`]: struct.ExecuteResult.html
    /// [`ToSql`]: trait.ToSql.html
    /// [`FromSql`]: trait.FromSql.html
    /// [`Query`]: struct.Query.html
    pub async fn execute<'a>(
        &mut self,
        query: impl Into<Cow<'a, str>>,
        params: &[&dyn ToSql],
    ) -> crate::Result<ExecuteResult> {
        self.connection.flush_stream().await?;
        let rpc_params = Self::rpc_params(query);

        let params = params.iter().map(|s| s.to_sql());
        self.rpc_perform_query(RpcProcId::ExecuteSQL, rpc_params, params)
            .await?;

        ExecuteResult::new(&mut self.connection).await
    }

    /// Executes SQL statements in the SQL Server, returning resulting rows.
    /// Useful for `SELECT` statements. The `query` can define the parameter
    /// placement by annotating them with `@PN`, where N is the index of the
    /// parameter, starting from `1`. If executing multiple queries at a time,
    /// delimit them with `;` and refer to [`QueryStream`] on proper stream
    /// handling.
    ///
    /// For mapping of Rust types when writing, see the documentation for
    /// [`ToSql`]. For reading data from the database, see the documentation for
    /// [`FromSql`].
    ///
    /// This API can be cumbersome for dynamic query parameters. In these cases,
    /// if fighting too much with the compiler, using a [`Query`] object might be
    /// easier.
    ///
    /// # Example
    ///
    /// ```
    /// # use tiberius::Config;
    /// # use tokio_util::compat::TokioAsyncWriteCompatExt;
    /// # use std::env;
    /// # #[tokio::main]
    /// # async fn main() -> Result<(), Box<dyn std::error::Error>> {
    /// # let c_str = env::var("TIBERIUS_TEST_CONNECTION_STRING").unwrap_or(
    /// #     "server=tcp:localhost,1433;integratedSecurity=true;TrustServerCertificate=true".to_owned(),
    /// # );
    /// # let config = Config::from_ado_string(&c_str)?;
    /// # let tcp = tokio::net::TcpStream::connect(config.get_addr()).await?;
    /// # tcp.set_nodelay(true)?;
    /// # let mut client = tiberius::Client::connect(config, tcp.compat_write()).await?;
    /// let stream = client
    ///     .query(
    ///         "SELECT @P1, @P2, @P3",
    ///         &[&1i32, &2i32, &3i32],
    ///     )
    ///     .await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// [`QueryStream`]: struct.QueryStream.html
    /// [`Query`]: struct.Query.html
    /// [`ToSql`]: trait.ToSql.html
    /// [`FromSql`]: trait.FromSql.html
    pub async fn query<'a, 'b>(
        &'a mut self,
        query: impl Into<Cow<'b, str>>,
        params: &'b [&'b dyn ToSql],
    ) -> crate::Result<QueryStream<'a>>
    where
        'a: 'b,
    {
        self.connection.flush_stream().await?;
        let rpc_params = Self::rpc_params(query);

        let params = params.iter().map(|p| p.to_sql());
        self.rpc_perform_query(RpcProcId::ExecuteSQL, rpc_params, params)
            .await?;

        let ts = TokenStream::new(&mut self.connection);
        let mut result = QueryStream::new(ts.try_unfold());
        result.forward_to_metadata().await?;

        Ok(result)
    }

    /// Execute multiple queries, delimited with `;` and return multiple result
    /// sets; one for each query.
    ///
    /// # Example
    ///
    /// ```
    /// # use tiberius::Config;
    /// # use tokio_util::compat::TokioAsyncWriteCompatExt;
    /// # use std::env;
    /// # #[tokio::main]
    /// # async fn main() -> Result<(), Box<dyn std::error::Error>> {
    /// # let c_str = env::var("TIBERIUS_TEST_CONNECTION_STRING").unwrap_or(
    /// #     "server=tcp:localhost,1433;integratedSecurity=true;TrustServerCertificate=true".to_owned(),
    /// # );
    /// # let config = Config::from_ado_string(&c_str)?;
    /// # let tcp = tokio::net::TcpStream::connect(config.get_addr()).await?;
    /// # tcp.set_nodelay(true)?;
    /// # let mut client = tiberius::Client::connect(config, tcp.compat_write()).await?;
    /// let row = client.simple_query("SELECT 1 AS col").await?.into_row().await?.unwrap();
    /// assert_eq!(Some(1i32), row.get("col"));
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// # Warning
    ///
    /// Do not use this with any user specified input. Please resort to prepared
    /// statements using the [`query`] method.
    ///
    /// [`query`]: #method.query
    pub async fn simple_query<'a, 'b>(
        &'a mut self,
        query: impl Into<Cow<'b, str>>,
    ) -> crate::Result<QueryStream<'a>>
    where
        'a: 'b,
    {
        self.connection.flush_stream().await?;

        let req = BatchRequest::new(query, self.connection.context().transaction_descriptor());

        let id = self.connection.context_mut().next_packet_id();
        self.connection.send(PacketHeader::batch(id), req).await?;

        let ts = TokenStream::new(&mut self.connection);

        let mut result = QueryStream::new(ts.try_unfold());
        result.forward_to_metadata().await?;

        Ok(result)
    }

    /// Execute a `BULK INSERT` statement, efficiently storing a large number of
    /// rows to a specified table. Note: make sure the input row follows the same
    /// schema as the table, otherwise calling `send()` will return an error.
    ///
    /// This is equivalent to calling `bulk_insert("table_name", &["*"])` to merge
    /// all of a tables columns.
    ///
    /// # Example
    ///
    /// ```
    /// # use tiberius::{Config, IntoRow};
    /// # use tokio_util::compat::TokioAsyncWriteCompatExt;
    /// # use std::env;
    /// # #[tokio::main]
    /// # async fn main() -> Result<(), Box<dyn std::error::Error>> {
    /// # let c_str = env::var("TIBERIUS_TEST_CONNECTION_STRING").unwrap_or(
    /// #     "server=tcp:localhost,1433;integratedSecurity=true;TrustServerCertificate=true".to_owned(),
    /// # );
    /// # let config = Config::from_ado_string(&c_str)?;
    /// # let tcp = tokio::net::TcpStream::connect(config.get_addr()).await?;
    /// # tcp.set_nodelay(true)?;
    /// # let mut client = tiberius::Client::connect(config, tcp.compat_write()).await?;
    /// let create_table = r#"
    ///     CREATE TABLE ##bulk_test (
    ///         id INT IDENTITY PRIMARY KEY,
    ///         val INT NOT NULL
    ///     )
    /// "#;
    ///
    /// client.simple_query(create_table).await?;
    ///
    /// // Start the bulk insert with the client.
    /// let mut req = client.bulk_insert("##bulk_test").await?;
    ///
    /// for i in [0i32, 1i32, 2i32] {
    ///     let row = (i).into_row();
    ///
    ///     // The request will handle flushing to the wire in an optimal way,
    ///     // balancing between memory usage and IO performance.
    ///     req.send(row).await?;
    /// }
    ///
    /// // The request must be finalized.
    /// let res = req.finalize().await?;
    /// assert_eq!(3, res.total());
    /// # Ok(())
    /// # }
    /// ```
    pub async fn bulk_insert<'a>(
        &'a mut self,
        table: &'a str,
    ) -> crate::Result<BulkLoadRequest<'a, S>> {
        self.bulk_insert_columns(table, &["*"]).await
    }

    /// Execute a `BULK INSERT` statement, efficiently storing a large number of
    /// rows to a specified table. Note: make sure the input row follows the same
    /// schema as the column list, otherwise calling `send()` will return an error.
    ///
    /// # Example
    ///
    /// ```
    /// # use tiberius::{Config, IntoRow};
    /// # use tokio_util::compat::TokioAsyncWriteCompatExt;
    /// # use std::env;
    /// # #[tokio::main]
    /// # async fn main() -> Result<(), Box<dyn std::error::Error>> {
    /// # let c_str = env::var("TIBERIUS_TEST_CONNECTION_STRING").unwrap_or(
    /// #     "server=tcp:localhost,1433;integratedSecurity=true;TrustServerCertificate=true".to_owned(),
    /// # );
    /// # let config = Config::from_ado_string(&c_str)?;
    /// # let tcp = tokio::net::TcpStream::connect(config.get_addr()).await?;
    /// # tcp.set_nodelay(true)?;
    /// # let mut client = tiberius::Client::connect(config, tcp.compat_write()).await?;
    /// let create_table = r#"
    ///     CREATE TABLE ##bulk_test_columns (
    ///         id INT IDENTITY PRIMARY KEY,
    ///         foo INT NOT NULL,
    ///         bar FLOAT NOT NULL
    ///     )
    /// "#;
    ///
    /// client.simple_query(create_table).await?;
    ///
    /// // Start the bulk insert with the client.
    /// let mut req = client.bulk_insert_columns("##bulk_test_columns", &["foo", "bar"]).await?;
    ///
    /// for (i, j) in [(0i32, 0f64), (1i32, 1f64), (2i32, 2f64)] {
    ///     let row = (i, j).into_row();
    ///
    ///     // The request will handle flushing to the wire in an optimal way,
    ///     // balancing between memory usage and IO performance.
    ///     req.send(row).await?;
    /// }
    ///
    /// // The request must be finalized.
    /// let res = req.finalize().await?;
    /// assert_eq!(3, res.total());
    /// # Ok(())
    /// # }
    /// ```
    pub async fn bulk_insert_columns<'a>(
        &'a mut self,
        table: &'a str,
        columns: &'a [&'a str],
    ) -> crate::Result<BulkLoadRequest<'a, S>> {
        // Retrieve column metadata from the server, keeping only the updateable
        // columns as bulk targets (identity/computed columns are skipped).
        let columns: Vec<_> = self
            .column_metadata(table, columns)
            .await?
            .into_iter()
            .filter(|column| column.base.flags.contains(ColumnFlag::Updateable))
            .collect();

        // now start bulk upload
        self.connection.flush_stream().await?;
        let col_data = columns.iter().map(|c| format!("{}", c)).join(", ");
        let query = format!("INSERT BULK {} ({})", table, col_data);

        let req = BatchRequest::new(query, self.connection.context().transaction_descriptor());
        let id = self.connection.context_mut().next_packet_id();

        self.connection.send(PacketHeader::batch(id), req).await?;

        let ts = TokenStream::new(&mut self.connection);
        ts.flush_done().await?;

        BulkLoadRequest::new(&mut self.connection, columns)
    }

    /// Retrieve the column metadata for a set of columns of a table, including
    /// the column names, types (with their size, precision and scale) and flags
    /// such as nullability and whether a column is an identity column.
    ///
    /// Pass `&["*"]` as `columns` to return the metadata for every column of the
    /// table.
    ///
    /// ```no_run
    /// # use tiberius::Config;
    /// # use tokio_util::compat::TokioAsyncWriteCompatExt;
    /// # use std::env;
    /// # #[tokio::main]
    /// # async fn main() -> Result<(), Box<dyn std::error::Error>> {
    /// # let c_str = env::var("TIBERIUS_TEST_CONNECTION_STRING").unwrap_or(
    /// #     "server=tcp:localhost,1433;integratedSecurity=true;TrustServerCertificate=true".to_owned(),
    /// # );
    /// # let config = Config::from_ado_string(&c_str)?;
    /// # let tcp = tokio::net::TcpStream::connect(config.get_addr()).await?;
    /// # tcp.set_nodelay(true)?;
    /// # let mut client = tiberius::Client::connect(config, tcp.compat_write()).await?;
    /// let meta = client.column_metadata("some_table", &["*"]).await?;
    /// assert!(meta[0].base().is_identity());
    /// # Ok(())
    /// # }
    /// ```
    pub async fn column_metadata(
        &mut self,
        table: &str,
        columns: &[&str],
    ) -> crate::Result<Vec<MetaDataColumn<'static>>> {
        self.connection.flush_stream().await?;

        // Ask the server for the column layout without returning any rows.
        let columns = columns.join(", ");
        let query = format!("SELECT TOP 0 {columns} FROM {table}");

        let req = BatchRequest::new(query, self.connection.context().transaction_descriptor());
        let id = self.connection.context_mut().next_packet_id();
        self.connection.send(PacketHeader::batch(id), req).await?;

        let token_stream = TokenStream::new(&mut self.connection).try_unfold();

        let columns = token_stream
            .try_fold(None, |mut columns, token| async move {
                if let ReceivedToken::NewResultset(metadata) = token {
                    columns = Some(metadata.columns.clone());
                };

                Ok(columns)
            })
            .await?;

        let columns = columns.ok_or_else(|| {
            crate::Error::Protocol("expecting column metadata from query but not found".into())
        })?;

        // Own the column names so the returned metadata is not tied to the
        // lifetime of the token stream.
        Ok(columns
            .into_iter()
            .map(|c| MetaDataColumn {
                base: c.base,
                col_name: std::borrow::Cow::Owned(c.col_name.into_owned()),
            })
            .collect())
    }

    /// Sends a TDS Attention signal to the server (packet type `0x06`,
    /// MS-TDS section 2.2.1.6) to cancel the request that is currently in
    /// flight on this connection, and drains the acknowledging token stream so
    /// the connection can be reused for further queries.
    ///
    /// The server responds to the Attention signal by aborting the running
    /// batch or RPC and returning a `DONE` token with the `DONE_ATTN` status
    /// bit set. This method waits for that acknowledgement before returning,
    /// discarding any remaining rows or tokens from the cancelled request.
    ///
    /// # Query cancellation and futures
    ///
    /// Dropping a [`query`], [`execute`] or [`simple_query`] future (for
    /// example when a `tokio::time::timeout` elapses or a `select!` branch is
    /// cancelled) stops the client from polling the stream, but it does *not*
    /// tell the server to stop working on the request. To actually cancel the
    /// in-flight work on the server, keep the [`Client`] and call
    /// `cancel_query` on it. Because `cancel_query` borrows the client
    /// mutably, it can only be issued once the borrowing result stream has
    /// been dropped — typically from a separate task holding the client, or
    /// after a cancelled/timed-out future has released its borrow.
    ///
    /// [`query`]: #method.query
    /// [`execute`]: #method.execute
    /// [`simple_query`]: #method.simple_query
    pub async fn cancel_query(&mut self) -> crate::Result<()> {
        self.connection.cancel_request().await?;
        Ok(())
    }

    /// Closes this database connection explicitly.
    pub async fn close(self) -> crate::Result<()> {
        self.connection.close().await
    }

    /// Begins a new transaction using a Transaction Manager request
    /// (`TM_BEGIN_XACT`, MS-TDS 2.2.6.8) instead of a `BEGIN TRAN` T-SQL
    /// batch.
    ///
    /// On success the server replies with a `BeginTransaction` environment
    /// change token whose descriptor is stored in the connection context and
    /// automatically attached to subsequent requests, scoping them to the
    /// transaction. Commit the work with [`commit_transaction`] or discard it
    /// with [`rollback_transaction`].
    ///
    /// The transaction uses the server's default isolation level. Use
    /// [`begin_transaction_with_isolation`] to request a specific one.
    ///
    /// [`commit_transaction`]: #method.commit_transaction
    /// [`rollback_transaction`]: #method.rollback_transaction
    /// [`begin_transaction_with_isolation`]: #method.begin_transaction_with_isolation
    pub async fn begin_transaction(&mut self) -> crate::Result<()> {
        self.begin_transaction_with_isolation(IsolationLevel::Unspecified)
            .await
    }

    /// Begins a new transaction with an explicit isolation level using a
    /// Transaction Manager request (`TM_BEGIN_XACT`, MS-TDS 2.2.6.8).
    ///
    /// See [`begin_transaction`] for details on transaction scoping.
    ///
    /// [`begin_transaction`]: #method.begin_transaction
    pub async fn begin_transaction_with_isolation(
        &mut self,
        isolation_level: IsolationLevel,
    ) -> crate::Result<()> {
        let req = TransactionManagerRequest::begin(
            self.connection.context().transaction_descriptor(),
            isolation_level,
            "",
        );

        self.send_transaction_manager_request(req).await
    }

    /// Commits the active transaction using a Transaction Manager request
    /// (`TM_COMMIT_XACT`, MS-TDS 2.2.6.8).
    ///
    /// After a successful commit the connection is no longer scoped to a
    /// transaction.
    pub async fn commit_transaction(&mut self) -> crate::Result<()> {
        let req = TransactionManagerRequest::commit(
            self.connection.context().transaction_descriptor(),
            "",
        );

        self.send_transaction_manager_request(req).await
    }

    /// Rolls back the active transaction using a Transaction Manager request
    /// (`TM_ROLLBACK_XACT`, MS-TDS 2.2.6.8).
    ///
    /// After a successful rollback the connection is no longer scoped to a
    /// transaction.
    pub async fn rollback_transaction(&mut self) -> crate::Result<()> {
        let req = TransactionManagerRequest::rollback(
            self.connection.context().transaction_descriptor(),
            "",
        );

        self.send_transaction_manager_request(req).await
    }

    /// Creates a named savepoint in the active transaction using a Transaction
    /// Manager request (`TM_SAVE_XACT`, MS-TDS 2.2.6.8).
    ///
    /// The savepoint can later be targeted by a T-SQL `ROLLBACK TRANSACTION
    /// <name>` to undo work performed after it while keeping the surrounding
    /// transaction open.
    pub async fn save_transaction<'a>(
        &mut self,
        name: impl Into<Cow<'a, str>>,
    ) -> crate::Result<()> {
        let req = TransactionManagerRequest::save(
            self.connection.context().transaction_descriptor(),
            name,
        );

        self.send_transaction_manager_request(req).await
    }

    async fn send_transaction_manager_request(
        &mut self,
        req: TransactionManagerRequest<'_>,
    ) -> crate::Result<()> {
        self.connection.flush_stream().await?;

        let id = self.connection.context_mut().next_packet_id();
        self.connection
            .send(PacketHeader::transaction_manager(id), req)
            .await?;

        // The server responds with a DONE token (plus an ENVCHANGE token that
        // the token stream applies to the connection context, updating the
        // active transaction descriptor).
        TokenStream::new(&mut self.connection).flush_done().await?;

        Ok(())
    }

    pub(crate) fn rpc_params<'a>(query: impl Into<Cow<'a, str>>) -> Vec<RpcParam<'a>> {
        vec![
            RpcParam {
                name: Cow::Borrowed("stmt"),
                flags: BitFlags::empty(),
                value: RpcValue::Scalar(ColumnData::String(Some(query.into()))),
            },
            RpcParam {
                name: Cow::Borrowed("params"),
                flags: BitFlags::empty(),
                value: RpcValue::Scalar(ColumnData::I32(Some(0))),
            },
        ]
    }

    pub(crate) async fn rpc_perform_query<'a, 'b>(
        &'a mut self,
        proc_id: RpcProcId,
        mut rpc_params: Vec<RpcParam<'b>>,
        params: impl Iterator<Item = ColumnData<'b>>,
    ) -> crate::Result<()>
    where
        'a: 'b,
    {
        let mut param_str = String::new();

        for (i, param) in params.enumerate() {
            if i > 0 {
                param_str.push(',')
            }
            param_str.push_str(&format!("@P{} ", i + 1));
            param_str.push_str(&param.type_name());

            rpc_params.push(RpcParam {
                name: Cow::Owned(format!("@P{}", i + 1)),
                flags: BitFlags::empty(),
                value: RpcValue::Scalar(param),
            });
        }

        if let Some(params) = rpc_params.iter_mut().find(|x| x.name == "params") {
            params.value = RpcValue::Scalar(ColumnData::String(Some(param_str.into())));
        }

        let req = TokenRpcRequest::new(
            proc_id,
            rpc_params,
            self.connection.context().transaction_descriptor(),
        );

        let id = self.connection.context_mut().next_packet_id();
        self.connection.send(PacketHeader::rpc(id), req).await?;

        Ok(())
    }

    /// Sends a named-procedure RPC request with the given parameters. The caller
    /// is responsible for flushing the connection beforehand and for consuming
    /// the resulting token stream.
    pub(crate) async fn rpc_run_command<'a, 'b>(
        &'a mut self,
        command_name: Cow<'b, str>,
        rpc_params: Vec<RpcParam<'b>>,
    ) -> crate::Result<()>
    where
        'a: 'b,
    {
        let req = TokenRpcRequest::new(
            command_name,
            rpc_params,
            self.connection.context().transaction_descriptor(),
        );

        let id = self.connection.context_mut().next_packet_id();
        self.connection.send(PacketHeader::rpc(id), req).await?;

        Ok(())
    }

    /// Runs a batch query solely to retrieve its column metadata. Used to
    /// resolve the column layout of a table-valued parameter type.
    pub(crate) async fn query_run_for_metadata<'b>(
        &mut self,
        query: String,
    ) -> crate::Result<Option<Vec<MetaDataColumn<'b>>>> {
        self.connection.flush_stream().await?;

        let req = BatchRequest::new(query, self.connection.context().transaction_descriptor());

        let id = self.connection.context_mut().next_packet_id();
        self.connection.send(PacketHeader::batch(id), req).await?;

        let token_stream = TokenStream::new(&mut self.connection).try_unfold();

        let columns = token_stream
            .try_fold(None, |mut columns, token| async move {
                if let ReceivedToken::NewResultset(metadata) = token {
                    columns = Some(metadata.columns.clone());
                };

                Ok(columns)
            })
            .await?;

        Ok(columns)
    }
}