systemdzbus 0.1.7

use zbus::{blocking::Connection, zvariant::OwnedObjectPath};

use crate::{
    errors::SystemdError,
    manager::ManagerProxyBlocking,
    systemctl::{
        connection_level::ConnectionLevel,
        job::Job,
        unit::{Unit, UnitEnablementResponse, UnitMode},
        unit_file::{EnablementStatus, UnitFile},
    },
};

pub struct SystemCtlBlockingBuilder {
    connection_level: ConnectionLevel,
}

impl Default for SystemCtlBlockingBuilder {
    fn default() -> Self {
        Self::new()
    }
}

impl SystemCtlBlockingBuilder {
    pub fn new() -> Self {
        Self {
            connection_level: ConnectionLevel::UserLevel,
        }
    }

    pub fn with_system_connection_level(mut self) -> Self {
        self.connection_level = ConnectionLevel::SystemLevel;
        self
    }

    pub fn init<'a>(self) -> Result<SystemCtlBlocking<'a>, SystemdError> {
        let connection = self.connection_level.get_connection_blocking()?;
        let proxy = ManagerProxyBlocking::new(&connection)?;
        Ok(SystemCtlBlocking {
            manager_proxy: proxy,
            connection_level: self.connection_level,
        })
    }
}

pub struct SystemCtlBlocking<'a> {
    manager_proxy: ManagerProxyBlocking<'a>,
    #[allow(unused)]
    connection_level: ConnectionLevel,
}

impl<'a> SystemCtlBlocking<'a> {
    /// Get access to the manager proxy directly. This allows you to call all the functions defined
    /// and documented in the ManagerProxy type, which is basically everything in
    /// org.freedesktop.systemd1.Manager. Here you will only get strings and numbers with no
    /// meaning attached to them, hopefully in future this will not be a required method.
    pub fn get_manager_proxy(&self) -> &ManagerProxyBlocking<'a> {
        &self.manager_proxy
    }

    /// Enqueues a start job and possibly depending jobs. It takes the unit to activate and a mode
    /// string as arguments. The mode needs to be one of "replace", "fail", "isolate", "ignore-dependencies", or
    /// "ignore-requirements". If "replace", the method will start the unit and its dependencies, possibly
    /// replacing already queued jobs that conflict with it. If "fail", the method will start the unit and its
    /// dependencies, but will fail if this would change an already queued job. If "isolate", the method will
    /// start the unit in question and terminate all units that aren't dependencies of it. If
    /// "ignore-dependencies", it will start a unit but ignore all its dependencies. If "ignore-requirements",
    /// it will start a unit but only ignore the requirement dependencies. It is not recommended to make use of
    /// the latter two options. On completion, this method returns the newly created job object.
    pub fn start_unit(&self, name: &str, mode: UnitMode) -> Result<OwnedObjectPath, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .start_unit(name, &mode.to_string())?)
    }

    /// Similar to StartUnit() but stops the specified unit rather than starting it. Note that the
    /// "isolate" mode is invalid for this method.
    pub fn stop_unit(&self, name: &str, mode: UnitMode) -> Result<OwnedObjectPath, SystemdError> {
        if let UnitMode::Isolate = mode {
            return Err(SystemdError::IsolateModeUnavailable);
        };

        Ok(self
            .get_manager_proxy()
            .stop_unit(name, &mode.to_string())?)
    }

    /// RestartUnit method, takes in the mode, i.e. same as start unit, I quote:
    /// The mode needs to be one of "replace", "fail", "isolate", "ignore-dependencies", or
    /// "ignore-requirements". returns the object path of the restarted unit.
    pub fn restart_unit(
        &self,
        name: &str,
        mode: UnitMode,
    ) -> Result<OwnedObjectPath, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .restart_unit(name, &mode.to_string())?)
    }

    /// ReloadUnit(), RestartUnit(), TryRestartUnit(), ReloadOrRestartUnit(), or ReloadOrTryRestartUnit() may be used to restart and/or reload a unit. These methods take similar arguments as StartUnit(). Reloading is done only if the
    /// unit is already running and fails otherwise. If a service is restarted that isn't running, it will be started unless the "Try" flavor is used in which case a service that isn't running is not affected by the restart. The
    /// "ReloadOrRestart" flavors attempt a reload if the unit supports it and use a restart otherwise.
    pub fn reload_unit(&self, name: &str, mode: UnitMode) -> Result<OwnedObjectPath, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .reload_unit(name, &mode.to_string())?)
    }

    /// A combination or the reload and restart methods.
    pub fn reload_or_restart_unit(
        &self,
        name: &str,
        mode: UnitMode,
    ) -> Result<OwnedObjectPath, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .reload_or_restart_unit(name, &mode.to_string())?)
    }

    /// May be used to enable one or more units in the system (by creating symlinks to them in /etc/ or /run/). It takes a list of unit files to enable (either just file names or full
    /// absolute paths if the unit files are residing outside the usual unit search paths) and two booleans: the first controls whether the unit shall be enabled for runtime only (true, /run/), or
    /// persistently (false, /etc/). The second one controls whether symlinks pointing to other units shall be replaced if necessary. This method returns one boolean and an array of the changes made. The
    /// boolean signals whether the unit files contained any enablement information (i.e. an "Install") section. The changes array consists of structures with three strings: the type of the change (one of
    /// "symlink" or "unlink"), the file name of the symlink and the destination of the symlink. Note that most of the following calls return a changes list in the same format.
    /// Similarly, DisableUnitFiles() disables one or more units in the system, i.e. removes all symlinks to them in /etc/ and /run/.
    /// The EnableUnitFilesWithFlags() and DisableUnitFilesWithFlags() take in options as flags instead of booleans to allow for extendability, defined as follows:
    /// SD_SYSTEMD_UNIT_RUNTIME will enable or disable the unit for runtime only, SD_SYSTEMD_UNIT_FORCE controls whether symlinks pointing to other units shall be replaced if necessary.
    /// SD_SYSTEMD_UNIT_PORTABLE will add or remove the symlinks in /etc/systemd/system.attached and /run/systemd/system.attached.
    /// Similarly, ReenableUnitFiles() applies the changes to one or more units that would result from disabling and enabling the unit quickly one after the other in an atomic fashion. This is useful to apply
    /// updated "Install" information contained in unit files.
    /// Similarly, LinkUnitFiles() links unit files (that are located outside of the usual unit search paths) into the unit search path.
    /// Similarly, PresetUnitFiles() enables/disables one or more unit files according to the preset policy. See systemd.preset(7) for more information.
    pub fn enable_units(
        &self,
        names: &[&str],
        runtime_only: bool,
        force: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .enable_unit_files(names, runtime_only, force)?
            .into())
    }

    pub fn enable_unit(
        &self,
        name: &str,
        runtime_only: bool,
        force: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .enable_unit_files(&[name], runtime_only, force)?
            .into())
    }

    /// Disables one or more units in the system, i.e. removes all symlinks to them in /etc/ and /run/.
    pub fn disable_units(
        &self,
        names: &[&str],
        runtime_only: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .disable_unit_files(names, runtime_only)?
            .into())
    }

    /// Similar to disable unit, but for a single unit.
    pub fn disable_unit(
        &self,
        name: &str,
        runtime_only: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .disable_unit_files(&[name], runtime_only)?
            .into())
    }

    /// Returns an array of all currently loaded units. Note that units may be known by multiple names at the same name, and hence there might be more unit names loaded than actual units behind them.
    pub fn list_units(&self) -> Result<Vec<Unit>, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .list_units()?
            .into_iter()
            .map(Into::into)
            .collect())
    }

    /// MaskUnitFiles() masks unit files and UnmaskUnitFiles() unmasks them again.
    pub fn mask_units(
        &self,
        names: &[&str],
        runtime_only: bool,
        force: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .mask_unit_files(names, runtime_only, force)?
            .into())
    }

    /// Similar to mask units except only masks a single unit file
    pub fn mask_unit(
        &self,
        name: &str,
        runtime_only: bool,
        force: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .mask_unit_files(&[name], runtime_only, force)?
            .into())
    }

    /// MaskUnitFiles() masks unit files and UnmaskUnitFiles() unmasks them again.
    pub fn unmask_units(
        &self,
        names: &[&str],
        runtime_only: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .unmask_unit_files(names, runtime_only)?
            .into())
    }

    /// Similar to unmask units except only masks a single unit file
    pub fn unmask_unit(
        &self,
        name: &str,
        runtime_only: bool,
    ) -> Result<UnitEnablementResponse, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .unmask_unit_files(&[name], runtime_only)?
            .into())
    }

    /// May be used to get the unit object path for a unit name. It takes the unit name and returns
    /// the object path. If a unit has not been loaded yet by this name this method will fail.
    pub fn get_unit(&self, name: &str) -> Result<OwnedObjectPath, SystemdError> {
        Ok(self.get_manager_proxy().get_unit(name)?)
    }

    /// Returns an array of unit names and their enablement status. Note that ListUnit() returns a list of units currently loaded into memory, while ListUnitFiles() returns a list of unit
    /// files that were found on disk. Note that while most units are read directly from a unit file with the same name, some units are not backed by files and some files (templates) cannot directly be loaded
    /// as units but need to be instantiated instead.
    pub fn list_unit_files(&self) -> Result<Vec<UnitFile>, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .list_unit_files()?
            .into_iter()
            .map(Into::into)
            .collect())
    }

    /// Returns the current enablement status of a specific unit file. The format of the string
    /// here is simply name.service, in other words, if you retrieved the unit files via
    /// list_unit_files, you may want to strip the prefix on the path to get the service name.
    pub fn get_unit_file_state(&self, file: &str) -> Result<EnablementStatus, SystemdError> {
        Ok(self.get_manager_proxy().get_unit_file_state(file)?.into())
    }

    /// Returns an array with all currently queued jobs. Returns an array consisting of structures with the following elements:
    /// •   The numeric job id
    /// •   The primary unit name for this job
    /// •   The job type as string
    /// •   The job state as string
    /// •   The job object path
    /// •   The unit object path
    pub fn list_jobs(&self) -> Result<Vec<Job>, SystemdError> {
        Ok(self
            .get_manager_proxy()
            .list_jobs()?
            .into_iter()
            .map(Into::into)
            .collect())
    }

    /// May be invoked to reload all unit files.
    pub fn reload(&self) -> Result<(), SystemdError> {
        Ok(self.get_manager_proxy().reload()?)
    }
}

impl ConnectionLevel {
    fn get_connection_blocking(&self) -> Result<Connection, SystemdError> {
        let connection = match self {
            ConnectionLevel::UserLevel => Connection::session()?,
            ConnectionLevel::SystemLevel => Connection::system()?,
        };

        Ok(connection)
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn can_get_unit() {
        let system_ctl = SystemCtlBlockingBuilder::new()
            .init()
            .expect("Should be able to init connection");

        let unit = system_ctl.get_unit("dbus.service");

        assert!(unit.is_ok());

        let units = system_ctl
            .list_units()
            .expect("Should be able to list units");

        for unit in units {
            let unit = system_ctl.get_unit(&unit.name);
            assert!(unit.is_ok());
        }
    }

    #[test]
    fn can_get_valid_unit_file_state() {
        let system_ctl = SystemCtlBlockingBuilder::new()
            .init()
            .expect("Should be able to init connection");

        let units = system_ctl
            .list_unit_files()
            .expect("Should be able to list units");

        for unit in units {
            let file = unit
                .path
                .split('/')
                .next_back()
                .expect("Should not be empty string");
            let status = system_ctl
                .get_unit_file_state(file)
                .expect("Should be able to get status");

            if let EnablementStatus::Other(_) = status {
                panic!("All unit files should have a valid status returned");
            };
        }
    }

    #[test]
    fn can_list_unit_files() {
        let system_ctl = SystemCtlBlockingBuilder::new()
            .init()
            .expect("Should be able to init connection");

        let unit_files = system_ctl.list_unit_files();

        assert!(unit_files.is_ok());

        let unit_files = unit_files.expect("Unit files should exist at this point");

        assert!(!unit_files.is_empty())
    }

    #[test]
    fn can_use_manager_proxy_directly() {
        let system_ctl = SystemCtlBlockingBuilder::new()
            .init()
            .expect("Should be able to init connection");

        let proxy = system_ctl.get_manager_proxy();

        let state = proxy.get_unit_file_state("dbus.service");

        assert!(state.is_ok());
    }

    #[test]
    fn can_list_units() {
        let system_ctl = SystemCtlBlockingBuilder::new()
            .init()
            .expect("Should be able to init connection");

        let units = system_ctl.list_units();

        assert!(units.is_ok());

        let units = units.expect("Units are OK by now");

        assert!(!units.is_empty());
    }
}