svd-generator 0.4.3

Converts device information from flattened device tree into an SVD description
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

use crate::svd::{create_bit_range, create_field, create_register, create_register_properties};
use crate::Result;

/// Creates the Interrupt Identity Register.
pub fn create() -> Result<svd::RegisterCluster> {
    Ok(svd::RegisterCluster::Register(
        create_register(
            "iir",
            "Interrupt Identity Register",
            0x8,
            create_register_properties(32, 0x1)?,
            Some(&[
                create_field(
                    "fifose",
                    "FIFOs Enabled. This is used to indicate whether the FIFOs are enabled or disabled. 00 = disabled 11 = enabled",
                    create_bit_range("[7:6]")?,
                    svd::Access::ReadOnly,
                    None,
                )?,
                create_field(
                    "iid",
                    "Interrupt ID. This indicates the highest priority pending interrupt which can be one of the following types: 0000 = modem status 0001 = no interrupt pending 0010 = THR empty 0100 = received data available 0110 = receiver line status 0111 = busy detect 1100 = character timeout The interrupt priorities are split into four levels that are detailed in Table 8 on page 97. Bit 3 indicates an interrupt can only occur when the FIFOs are enabled and used to distinguish a Character Timeout condition interrupt.",
                    create_bit_range("[3:0]")?,
                    svd::Access::ReadOnly,
                    None,
                )?,
            ]),
            None,
        )?
    ))
}