subsecond 0.7.6

#![allow(clippy::needless_doctest_main)]
//! # Subsecond: Hot-patching for Rust
//!
//! Subsecond is a library that enables hot-patching for Rust applications. This allows you to change
//! the code of a running application without restarting it. This is useful for game engines, servers,
//! and other long-running applications where the typical edit-compile-run cycle is too slow.
//!
//! Subsecond also implements a technique we call "ThinLinking" which makes compiling Rust code
//! significantly faster in development mode, which can be used outside of hot-patching.
//!
//! # Usage
//!
//! Subsecond is designed to be as simple for both application developers and library authors.
//!
//! Simply call your existing functions with [`call`] and Subsecond will automatically detour
//! that call to the latest version of the function.
//!
//! ```rust
//! for x in 0..5 {
//!     subsecond::call(|| {
//!         println!("Hello, world! {}", x);
//!     });
//! }
//! ```
//!
//! To actually load patches into your application, a third-party tool that implements the Subsecond
//! compiler and protocol is required. Subsecond is built and maintained by the Dioxus team, so we
//! suggest using the dioxus CLI tool to use subsecond.
//!
//! To install the Dioxus CLI, we recommend using [`cargo binstall`](https://crates.io/crates/cargo-binstall):
//!
//! ```sh
//! cargo binstall dioxus-cli
//! ```
//!
//! The Dioxus CLI provides several tools for development. To run your application with Subsecond enabled,
//! use `dx serve` - this takes the same arguments as `cargo run` but will automatically hot-reload your
//! application when changes are detected.
//!
//! As of Dioxus 0.7, "--hotpatch" is required to use hotpatching while Subsecond is still experimental.
//!
//! ```sh
//! dx serve --hotpatch
//! ```
//!
//! ## How it works
//!
//! Subsecond works by detouring function calls through a jump table. This jump table contains the latest
//! version of the program's function pointers, and when a function is called, Subsecond will look up
//! the function in the jump table and call that instead.
//!
//! Unlike libraries like [detour](https://crates.io/crates/detour), Subsecond *does not* modify your
//! process memory. Patching pointers is wildly unsafe and can lead to crashes and undefined behavior.
//!
//! Instead, an external tool compiles only the parts of your project that changed, links them together
//! using the addresses of the functions in your running program, and then sends the new jump table to
//! your application. Subsecond then applies the patch and continues running. Since Subsecond doesn't
//! modify memory, the program must have a runtime integration to handle the patching.
//!
//! If the framework you're using doesn't integrate with subsecond, you can rely on the fact that calls
//! to stale [`call`] instances will emit a safe panic that is automatically caught and retried
//! by the next [`call`] instance up the callstack.
//!
//! Subsecond is only enabled when debug_assertions are enabled so you can safely ship your application
//! with Subsecond enabled without worrying about the performance overhead.
//!
//! ## Workspace support
//!
//! Subsecond currently only patches the "tip" crate - ie the crate in which your `main.rs` is located.
//! Changes to crates outside this crate will be ignored, which can be confusing. We plan to add full
//! workspace support in the future, but for now be aware of this limitation. Crate setups that have
//! a `main.rs` importing a `lib.rs` won't patch sensibly since the crate becomes a library for itself.
//!
//! This is due to limitations in rustc itself where the build-graph is non-deterministic and changes
//! to functions that forward generics can cause a cascade of codegen changes.
//!
//! ## Globals, statics, and thread-locals
//!
//! Subsecond *does* support hot-reloading of globals, statics, and thread locals. However, there are several limitations:
//!
//! - You may add new globals at runtime, but their destructors will never be called.
//! - Globals are tracked across patches, but renames are considered to be *new* globals.
//! - Changes to static initializers will not be observed.
//!
//! Subsecond purposefully handles statics this way since many libraries like Dioxus and Tokio rely
//! on persistent global runtimes.
//!
//! HUGE WARNING: Currently, thread-locals in the "tip" crate (the one being patched) will seemingly
//! reset to their initial value on new patches. This is because we don't currently bind thread-locals
//! in the patches to their original addresses in the main program. If you rely on thread-locals heavily
//! in your tip crate, you should be aware of this. Sufficiently complex setups might crash or even
//! segfault. We plan to fix this in the future, but for now, you should be aware of this limitation.
//!
//! ## Struct layout and alignment
//!
//! Subsecond currently does not support hot-reloading of structs. This is because the generated code
//! assumes a particular layout and alignment of the struct. If layout or alignment change and new
//! functions are called referencing an old version of the struct, the program will crash.
//!
//! To mitigate this, framework authors can integrate with Subsecond to either dispose of the old struct
//! or to re-allocate the struct in a way that is compatible with the new layout. This is called "re-instancing."
//!
//! In practice, frameworks that implement subsecond patching properly will throw out the old state
//! and thus you should never witness a segfault due to misalignment or size changes. Frameworks are
//! encouraged to aggressively dispose of old state that might cause size and alignment changes.
//!
//! We'd like to lift this limitation in the future by providing utilities to re-instantiate structs,
//! but for now it's up to the framework authors to handle this. For example, Dioxus apps simply throw
//! out the old state and rebuild it from scratch.
//!
//! ## Pointer versioning
//!
//! Currently, Subsecond does not "version" function pointers. We have plans to provide this metadata
//! so framework authors can safely memoize changes without much runtime overhead. Frameworks like
//! Dioxus and Bevy circumvent this issue by using the TypeID of structs passed to hot functions as
//! well as the `ptr_address` method on [`HotFn`] to determine if the function pointer has changed.
//!
//! Currently, the `ptr_address` method will always return the most up-to-date version of the function
//! even if the function contents itself did not change. In essence, this is equivalent to a version
//! of the function where every function is considered "new." This means that framework authors who
//! integrate re-instancing in their apps might dispose of old state too aggressively. For now, this
//! is the safer and more practical approach.
//!
//! ## Nesting Calls
//!
//! Subsecond calls are designed to be nested. This provides clean integration points to know exactly
//! where a hooked function is called.
//!
//! The highest level call is `fn main()` though by default this is not hooked since initialization code
//! tends to be side-effectual and modify global state. Instead, we recommend wrapping the hot-patch
//! points manually with [`call`].
//!
//! ```rust
//! fn main() {
//!     // Changes to the `for` loop will cause an unwind to this call.
//!     subsecond::call(|| {
//!         for x in 0..5 {
//!             // Changes to the `println!` will be isolated to this call.
//!             subsecond::call(|| {
//!                 println!("Hello, world! {}", x);
//!             });
//!         }
//!    });
//! }
//! ```
//!
//! The goal here is to provide granular control over where patches are applied to limit loss of state
//! when new code is loaded.
//!
//! ## Applying patches
//!
//! When running under the Dioxus CLI, the `dx serve` command will automatically apply patches when
//! changes are detected. Patches are delivered over the [Dioxus Devtools](https://crates.io/crates/dioxus-devtools)
//! websocket protocol and received by corresponding websocket.
//!
//! If you're using Subsecond in your own application that doesn't have a runtime integration, you can
//! build an integration using the [`apply_patch`] function. This function takes a `JumpTable` which
//! the dioxus-cli crate can generate.
//!
//! To add support for the Dioxus Devtools protocol to your app, you can use the [dioxus-devtools](https://crates.io/crates/dioxus-devtools)
//! crate which provides a `connect` method that will automatically apply patches to your application.
//!
//! Unfortunately, one design quirk of Subsecond is that running apps need to communicate the address
//! of `main` to the patcher. This is due to a security technique called [ASLR](https://en.wikipedia.org/wiki/Address_space_layout_randomization)
//! which randomizes the address of functions in memory. See the subsecond-harness and subsecond-cli
//! for more details on how to implement the protocol.
//!
//! ## ThinLink
//!
//! ThinLink is a program linker for Rust that is designed to be used with Subsecond. It implements
//! the powerful patching system that Subsecond uses to hot-reload Rust applications.
//!
//! ThinLink is simply a wrapper around your existing linker but with extra features:
//!
//! - Automatic dynamic linking to dependencies
//! - Generation of Subsecond jump tables
//! - Diffing of object files for function invalidation
//!
//! Because ThinLink performs very to little actual linking, it drastically speeds up traditional Rust
//! development. With a development-optimized profile, ThinLink can shrink an incremental build to less than 500ms.
//!
//! ThinLink is automatically integrated into the Dioxus CLI though it's currently not available as
//! a standalone tool.
//!
//! ## Limitations
//!
//! Subsecond is a powerful tool but it has several limitations. We talk about them above, but here's
//! a quick summary:
//!
//! - Struct hot reloading requires instancing or unwinding
//! - Statics are tracked but not destructed
//!
//! ## Platform support
//!
//! Subsecond works across all major platforms:
//!
//! - Android (arm64-v8a, armeabi-v7a)
//! - iOS (arm64)
//! - Linux (x86_64, aarch64)
//! - macOS (x86_64, aarch64)
//! - Windows (x86_64, arm64)
//! - WebAssembly (wasm32)
//!
//! If you have a new platform you'd like to see supported, please open an issue on the Subsecond repository.
//! We are keen to add support for new platforms like wasm64, riscv64, and more.
//!
//! Note that iOS device is currently not supported due to code-signing requirements. We hope to fix
//! this in the future, but for now you can use the simulator to test your app.
//!
//! ## Adding the Subsecond badge to your project
//!
//! If you're a framework author and want your users to know that your library supports Subsecond, you
//! can add the Subsecond badge to your README! Users will know that your library is hot-reloadable and
//! can be used with Subsecond.
//!
//! [![Subsecond](https://img.shields.io/badge/Subsecond-Enabled-orange)](https://crates.io/crates/subsecond)
//!
//! ```markdown
//! [![Subsecond](https://img.shields.io/badge/Subsecond-Enabled-orange)](https://crates.io/crates/subsecond)
//! ```
//!
//! ## License
//!
//! Subsecond and ThinLink are licensed under the MIT license. See the LICENSE file for more information.
//!
//! ## Supporting this work
//!
//! Subsecond is a project by the Dioxus team. If you'd like to support our work, please consider
//! [sponsoring us on GitHub](https://github.com/sponsors/DioxusLabs) or eventually deploying your
//! apps with Dioxus Deploy (currently under construction).

pub use subsecond_types::JumpTable;

use std::{
    backtrace,
    mem::transmute,
    panic::AssertUnwindSafe,
    sync::{atomic::AtomicPtr, Arc, Mutex},
};

/// Call a given function with hot-reloading enabled. If the function's code changes, `call` will use
/// the new version of the function. If code *above* the function changes, this will emit a panic
/// that forces an unwind to the next [`call`] instance.
///
/// WASM/rust does not support unwinding, so [`call`] will not track dependency graph changes.
/// If you are building a framework for use on WASM, you will need to use `Subsecond::HotFn` directly.
///
/// However, if you wrap your calling code in a future, you *can* simply drop the future which will
/// cause `drop` to execute and get something similar to unwinding. Not great if refcells are open.
pub fn call<O>(mut f: impl FnMut() -> O) -> O {
    // Only run in debug mode - the rest of this function will dissolve away
    if !cfg!(debug_assertions) {
        return f();
    }

    let mut hotfn = HotFn::current(f);
    loop {
        let res = std::panic::catch_unwind(AssertUnwindSafe(|| hotfn.call(())));

        // If the call succeeds just return the result, otherwise we try to handle the panic if its our own.
        let err = match res {
            Ok(res) => return res,
            Err(err) => err,
        };

        // If this is our panic then let's handle it, otherwise we just resume unwinding
        let Some(_hot_payload) = err.downcast_ref::<HotFnPanic>() else {
            std::panic::resume_unwind(err);
        };
    }
}

// We use an AtomicPtr with a leaked JumpTable and Relaxed ordering to give us a global jump table
// with very little overhead. Reading this amounts of a Relaxed atomic load which basically
// is no overhead. We might want to look into using a thread_local with a stop-the-world approach
// just in case multiple threads try to call the jump table before synchronization with the runtime.
// For Dioxus purposes, this is not a big deal, but for libraries like bevy which heavily rely on
// multithreading, it might become an issue.
static APP_JUMP_TABLE: AtomicPtr<JumpTable> = AtomicPtr::new(std::ptr::null_mut());
static HOTRELOAD_HANDLERS: Mutex<Vec<Arc<dyn Fn() + Send + Sync>>> = Mutex::new(Vec::new());

/// Register a function that will be called whenever a patch is applied.
///
/// This handler will be run immediately after the patch library is loaded into the process and the
/// JumpTable has been set.
pub fn register_handler(handler: Arc<dyn Fn() + Send + Sync + 'static>) {
    HOTRELOAD_HANDLERS.lock().unwrap().push(handler);
}

/// Get the current jump table, if it exists.
///
/// This will return `None` if no jump table has been set yet.
///
/// # Safety
///
/// The `JumpTable` returned here is a pointer into a leaked box. While technically this reference is
/// valid, we might change the implementation to invalidate the pointer between hotpatches.
///
/// You should only use this lifetime in temporary contexts - not *across* hotpatches!
pub unsafe fn get_jump_table() -> Option<&'static JumpTable> {
    let ptr = APP_JUMP_TABLE.load(std::sync::atomic::Ordering::Relaxed);
    if ptr.is_null() {
        return None;
    }

    Some(unsafe { &*ptr })
}
unsafe fn commit_patch(table: JumpTable) {
    APP_JUMP_TABLE.store(
        Box::into_raw(Box::new(table)),
        std::sync::atomic::Ordering::Relaxed,
    );
    HOTRELOAD_HANDLERS
        .lock()
        .unwrap()
        .clone()
        .iter()
        .for_each(|handler| {
            handler();
        });
}

/// A panic issued by the [`call`] function if the caller would be stale if called. This causes
/// an unwind to the next [`call`] instance that can properly handle the panic and retry the call.
///
/// This technique allows Subsecond to provide hot-reloading of codebases that don't have a runtime integration.
#[derive(Debug)]
pub struct HotFnPanic {
    _backtrace: backtrace::Backtrace,
}

/// A pointer to a hot patched function
#[non_exhaustive]
#[derive(PartialEq, Eq, Hash, Clone, Copy, Debug)]
pub struct HotFnPtr(pub u64);

impl HotFnPtr {
    /// Create a new [`HotFnPtr`].
    ///
    /// The safe way to get one is through [`HotFn::ptr_address`].
    ///
    /// # Safety
    ///
    /// The underlying `u64` must point to a valid function.
    pub unsafe fn new(index: u64) -> Self {
        Self(index)
    }
}

/// A hot-reloadable function.
///
/// To call this function, use the [`HotFn::call`] method. This will automatically use the latest
/// version of the function from the JumpTable.
pub struct HotFn<A, M, F>
where
    F: HotFunction<A, M>,
{
    inner: F,
    _marker: std::marker::PhantomData<(A, M)>,
}

impl<A, M, F: HotFunction<A, M>> HotFn<A, M, F> {
    /// Create a new [`HotFn`] instance with the current function.
    ///
    /// Whenever you call [`HotFn::call`], it will use the current function from the [`JumpTable`].
    pub const fn current(f: F) -> HotFn<A, M, F> {
        HotFn {
            inner: f,
            _marker: std::marker::PhantomData,
        }
    }

    /// Call the function with the given arguments.
    ///
    /// This will unwrap the [`HotFnPanic`] panic, propagating up to the next [`HotFn::call`].
    ///
    /// If you want to handle the panic yourself, use [`HotFn::try_call`].
    pub fn call(&mut self, args: A) -> F::Return {
        self.try_call(args).unwrap()
    }

    /// Get the address of the function in memory which might be different than the original.
    ///
    /// This is useful for implementing a memoization strategy to safely preserve state across
    /// hot-patches. If the ptr_address of a function did not change between patches, then the
    /// state that exists "above" the function is still valid.
    ///
    /// Note that Subsecond does not track this state over time, so it's up to the runtime integration
    /// to track this state and diff it.
    pub fn ptr_address(&self) -> HotFnPtr {
        if size_of::<F>() == size_of::<fn() -> ()>() {
            let ptr: usize = unsafe { std::mem::transmute_copy(&self.inner) };
            return HotFnPtr(ptr as u64);
        }

        let known_fn_ptr = <F as HotFunction<A, M>>::call_it as *const () as usize;
        if let Some(jump_table) = unsafe { get_jump_table() } {
            if let Some(ptr) = jump_table.map.get(&(known_fn_ptr as u64)).cloned() {
                return HotFnPtr(ptr);
            }
        }

        HotFnPtr(known_fn_ptr as u64)
    }

    /// Attempt to call the function with the given arguments.
    ///
    /// If this function is stale and can't be updated in place (ie, changes occurred above this call),
    /// then this function will emit an [`HotFnPanic`] which can be unwrapped and handled by next [`call`]
    /// instance.
    pub fn try_call(&mut self, args: A) -> Result<F::Return, HotFnPanic> {
        if !cfg!(debug_assertions) {
            return Ok(self.inner.call_it(args));
        }

        unsafe {
            // Try to handle known function pointers. This is *really really* unsafe, but due to how
            // rust trait objects work, it's impossible to make an arbitrary usize-sized type implement Fn()
            // since that would require a vtable pointer, pushing out the bounds of the pointer size.
            if size_of::<F>() == size_of::<fn() -> ()>() {
                return Ok(self.inner.call_as_ptr(args));
            }

            // Handle trait objects. This will occur for sizes other than usize. Normal rust functions
            // become ZST's and thus their <T as SomeFn>::call becomes a function pointer to the function.
            //
            // For non-zst (trait object) types, then there might be an issue. The real call function
            // will likely end up in the vtable and will never be hot-reloaded since signature takes self.
            if let Some(jump_table) = get_jump_table() {
                let known_fn_ptr = <F as HotFunction<A, M>>::call_it as *const () as u64;
                if let Some(ptr) = jump_table.map.get(&known_fn_ptr).cloned() {
                    // The type sig of the cast should match the call_it function
                    // Technically function pointers need to be aligned, but that alignment is 1 so we're good
                    let call_it = transmute::<*const (), fn(&F, A) -> F::Return>(ptr as _);
                    return Ok(call_it(&self.inner, args));
                }
            }

            Ok(self.inner.call_it(args))
        }
    }

    /// Attempt to call the function with the given arguments, using the given [`HotFnPtr`].
    ///
    /// You can get a [`HotFnPtr`] from [`Self::ptr_address`].
    ///
    /// If this function is stale and can't be updated in place (ie, changes occurred above this call),
    /// then this function will emit an [`HotFnPanic`] which can be unwrapped and handled by next [`call`]
    /// instance.
    ///
    /// # Safety
    ///
    /// The [`HotFnPtr`] must be to a function whose arguments layouts haven't changed.
    pub unsafe fn try_call_with_ptr(
        &mut self,
        ptr: HotFnPtr,
        args: A,
    ) -> Result<F::Return, HotFnPanic> {
        if !cfg!(debug_assertions) {
            return Ok(self.inner.call_it(args));
        }

        unsafe {
            // Try to handle known function pointers. This is *really really* unsafe, but due to how
            // rust trait objects work, it's impossible to make an arbitrary usize-sized type implement Fn()
            // since that would require a vtable pointer, pushing out the bounds of the pointer size.
            if size_of::<F>() == size_of::<fn() -> ()>() {
                return Ok(self.inner.call_as_ptr(args));
            }

            // Handle trait objects. This will occur for sizes other than usize. Normal rust functions
            // become ZST's and thus their <T as SomeFn>::call becomes a function pointer to the function.
            //
            // For non-zst (trait object) types, then there might be an issue. The real call function
            // will likely end up in the vtable and will never be hot-reloaded since signature takes self.
            // The type sig of the cast should match the call_it function
            // Technically function pointers need to be aligned, but that alignment is 1 so we're good
            let call_it = transmute::<*const (), fn(&F, A) -> F::Return>(ptr.0 as _);
            Ok(call_it(&self.inner, args))
        }
    }
}

/// Apply the patch using a given jump table.
///
/// # Safety
///
/// This function is unsafe because it detours existing functions in memory. This is *wildly* unsafe,
/// especially if the JumpTable is malformed. Only run this if you know what you're doing.
///
/// If the pointers are incorrect, function type signatures will be incorrect and the program will crash,
/// sometimes in a way that requires a restart of your entire computer. Be careful.
///
/// # Warning
///
/// This function will load the library and thus allocates. In cannot be used when the program is
/// stopped (ie in a signal handler).
pub unsafe fn apply_patch(mut table: JumpTable) -> Result<(), PatchError> {
    // On non-wasm platforms we can just use libloading and the known aslr offsets to load the library
    #[cfg(any(unix, windows))]
    {
        // on android we try to circumvent permissions issues by copying the library to a memmap and then libloading that
        #[cfg(target_os = "android")]
        let lib = Box::leak(Box::new(android_memmap_dlopen(&table.lib)?));

        #[cfg(not(target_os = "android"))]
        let lib = Box::leak(Box::new({
            match libloading::Library::new(&table.lib) {
                Ok(lib) => lib,
                Err(err) => return Err(PatchError::Dlopen(err.to_string())),
            }
        }));

        // Use the `main` symbol as a sentinel for the current executable. This is basically a
        // cross-platform version of `__mh_execute_header` on macOS that we can use to base the executable.
        let old_offset = aslr_reference() - table.aslr_reference as usize;

        // Use the `main` symbol as a sentinel for the loaded library. Might want to move away
        // from this at some point, or make it configurable
        let new_offset = unsafe {
            // Leak the library. dlopen is basically a no-op on many platforms and if we even try to drop it,
            // some code might be called (ie drop) that results in really bad crashes (restart your computer...)
            //
            // This code currently assumes "main" always makes it to the export list (which it should)
            // and requires coordination from the CLI to export it.
            lib.get::<*const ()>(b"main")
                .ok()
                .unwrap()
                .try_as_raw_ptr()
                .unwrap()
                .wrapping_byte_sub(table.new_base_address as usize) as usize
        };

        // Modify the jump table to be relative to the base address of the loaded library
        table.map = table
            .map
            .iter()
            .map(|(k, v)| {
                (
                    (*k as usize + old_offset) as u64,
                    (*v as usize + new_offset) as u64,
                )
            })
            .collect();

        commit_patch(table);
    };

    // On wasm, we need to download the module, compile it, and then run it.
    #[cfg(target_arch = "wasm32")]
    wasm_bindgen_futures::spawn_local(async move {
        use js_sys::{
            ArrayBuffer, Object, Reflect,
            WebAssembly::{self, Memory, Table},
        };
        use wasm_bindgen::prelude::*;
        use wasm_bindgen::JsValue;
        use wasm_bindgen::UnwrapThrowExt;
        use wasm_bindgen_futures::JsFuture;

        let funcs: Table = wasm_bindgen::function_table().unchecked_into();
        let memory: Memory = wasm_bindgen::memory().unchecked_into();
        let exports: Object = wasm_bindgen::exports().unchecked_into();
        let buffer: ArrayBuffer = memory.buffer().unchecked_into();

        let path = table.lib.to_str().unwrap();
        if !path.ends_with(".wasm") {
            return;
        }

        // Start the fetch of the module
        let response = web_sys::window().unwrap_throw().fetch_with_str(&path);

        // Wait for the fetch to complete - we need the wasm module size in bytes to reserve in the memory
        let response: web_sys::Response = JsFuture::from(response).await.unwrap().unchecked_into();

        // If the status is not success, we bail
        if !response.ok() {
            panic!(
                "Failed to patch wasm module at {} - response failed with: {}",
                path,
                response.status_text()
            );
        }

        let dl_bytes: ArrayBuffer = JsFuture::from(response.array_buffer().unwrap())
            .await
            .unwrap()
            .unchecked_into();

        // Expand the memory and table size to accommodate the new data and functions
        //
        // Normally we wouldn't be able to trust that we are allocating *enough* memory
        // for BSS segments, but ld emits them in the binary when using import-memory.
        //
        // Make sure we align the memory base to the page size
        const PAGE_SIZE: u32 = 64 * 1024;
        let page_count = (buffer.byte_length() as f64 / PAGE_SIZE as f64).ceil() as u32;
        let memory_base = (page_count + 1) * PAGE_SIZE;

        // We need to grow the memory to accommodate the new module
        memory.grow((dl_bytes.byte_length() as f64 / PAGE_SIZE as f64).ceil() as u32 + 1);

        // We grow the ifunc table to accommodate the new functions
        // In theory we could just put all the ifuncs in the jump map and use that for our count,
        // but there's no guarantee from the jump table that it references "itself"
        // We might need a sentinel value for each ifunc in the jump map to indicate that it is
        let table_base = funcs.grow(table.ifunc_count as u32).unwrap();

        // Adjust the jump table to be relative to the new base address
        for v in table.map.values_mut() {
            *v += table_base as u64;
        }

        // Build up the import object. We copy everything over from the current exports, but then
        // need to add in the memory and table base offsets for the relocations to work.
        //
        // let imports = {
        //     env: {
        //         memory: base.memory,
        //         __tls_base: base.__tls_base,
        //         __stack_pointer: base.__stack_pointer,
        //         __indirect_function_table: base.__indirect_function_table,
        //         __memory_base: memory_base,
        //         __table_base: table_base,
        //        ..base_exports
        //     },
        // };
        let env = Object::new();

        // Move memory, __tls_base, __stack_pointer, __indirect_function_table, and all exports over
        for key in Object::keys(&exports) {
            Reflect::set(&env, &key, &Reflect::get(&exports, &key).unwrap()).unwrap();
        }

        // Set the memory and table in the imports
        // Following this pattern: Global.new({ value: "i32", mutable: false }, value)
        for (name, value) in [("__table_base", table_base), ("__memory_base", memory_base)] {
            let descriptor = Object::new();
            Reflect::set(&descriptor, &"value".into(), &"i32".into()).unwrap();
            Reflect::set(&descriptor, &"mutable".into(), &false.into()).unwrap();
            let value = WebAssembly::Global::new(&descriptor, &value.into()).unwrap();
            Reflect::set(&env, &name.into(), &value.into()).unwrap();
        }

        // Set the memory and table in the imports
        let imports = Object::new();
        Reflect::set(&imports, &"env".into(), &env).unwrap();

        // Download the module, returning { module, instance }
        // we unwrap here instead of using `?` since this whole thing is async
        let result_object = JsFuture::from(WebAssembly::instantiate_module(
            dl_bytes.unchecked_ref(),
            &imports,
        ))
        .await
        .unwrap();

        // We need to run the data relocations and then fire off the constructors
        let res: Object = result_object.unchecked_into();
        let instance: Object = Reflect::get(&res, &"instance".into())
            .unwrap()
            .unchecked_into();
        let exports: Object = Reflect::get(&instance, &"exports".into())
            .unwrap()
            .unchecked_into();
        _ = Reflect::get(&exports, &"__wasm_apply_data_relocs".into())
            .unwrap()
            .unchecked_into::<js_sys::Function>()
            .call0(&JsValue::undefined());
        _ = Reflect::get(&exports, &"__wasm_apply_global_relocs".into())
            .unwrap()
            .unchecked_into::<js_sys::Function>()
            .call0(&JsValue::undefined());
        _ = Reflect::get(&exports, &"__wasm_call_ctors".into())
            .unwrap()
            .unchecked_into::<js_sys::Function>()
            .call0(&JsValue::undefined());

        unsafe { commit_patch(table) };
    });

    Ok(())
}

#[derive(Debug, PartialEq, thiserror::Error)]
pub enum PatchError {
    /// The patch failed to apply.
    ///
    /// This returns a string instead of the Dlopen error type so we don't need to bring the libloading
    /// dependency into the public API.
    #[error("Failed to load library: {0}")]
    Dlopen(String),

    /// The patch failed to apply on Android, most likely due to a permissions issue.
    #[error("Failed to load library on Android: {0}")]
    AndroidMemfd(String),
}

/// This function returns the address of the main function in the current executable. This is used as
/// an anchor to reference the current executable's base address.
///
/// The point here being that we have a stable address both at runtime and compile time, making it
/// possible to calculate the ASLR offset from within the process to correct the jump table.
///
/// It should only be called from the main executable *first* and not from a shared library since it
/// self-initializes.
#[doc(hidden)]
pub fn aslr_reference() -> usize {
    #[cfg(target_family = "wasm")]
    return 0;

    #[cfg(not(target_family = "wasm"))]
    unsafe {
        use std::ffi::c_void;

        // The first call to this function should occur in the
        static mut MAIN_PTR: *mut c_void = std::ptr::null_mut();

        if MAIN_PTR.is_null() {
            #[cfg(unix)]
            {
                MAIN_PTR = libc::dlsym(libc::RTLD_DEFAULT, c"main".as_ptr() as _);
            }

            #[cfg(windows)]
            {
                extern "system" {
                    fn GetModuleHandleA(lpModuleName: *const i8) -> *mut std::ffi::c_void;
                    fn GetProcAddress(
                        hModule: *mut std::ffi::c_void,
                        lpProcName: *const i8,
                    ) -> *mut std::ffi::c_void;
                }

                MAIN_PTR =
                    GetProcAddress(GetModuleHandleA(std::ptr::null()), c"main".as_ptr() as _) as _;
            }
        }

        MAIN_PTR as usize
    }
}

/// On Android, we can't dlopen libraries that aren't placed inside /data/data/<package_name>/lib/
///
/// If the device isn't rooted, then we can't push the library there.
/// This is a workaround to copy the library to a memfd and then dlopen it.
///
/// I haven't tested it on device yet, so if if it doesn't work, then we can simply revert to using
/// "adb root" and then pushing the library to the /data/data folder instead of the tmp folder.
///
/// Android provides us a flag when calling dlopen to use a file descriptor instead of a path, presumably
/// because they want to support this.
/// - https://developer.android.com/ndk/reference/group/libdl
/// - https://developer.android.com/ndk/reference/structandroid/dlextinfo
#[cfg(target_os = "android")]
unsafe fn android_memmap_dlopen(file: &std::path::Path) -> Result<libloading::Library, PatchError> {
    use std::ffi::{c_void, CStr, CString};
    use std::os::fd::{AsRawFd, BorrowedFd};
    use std::ptr;

    #[repr(C)]
    struct ExtInfo {
        flags: u64,
        reserved_addr: *const c_void,
        reserved_size: libc::size_t,
        relro_fd: libc::c_int,
        library_fd: libc::c_int,
        library_fd_offset: libc::off64_t,
        library_namespace: *const c_void,
    }

    extern "C" {
        fn android_dlopen_ext(
            filename: *const libc::c_char,
            flags: libc::c_int,
            ext_info: *const ExtInfo,
        ) -> *const c_void;
    }

    use memmap2::MmapAsRawDesc;
    use std::os::unix::prelude::{FromRawFd, IntoRawFd};

    let contents = std::fs::read(file)
        .map_err(|e| PatchError::AndroidMemfd(format!("Failed to read file: {}", e)))?;
    let mut mfd = memfd::MemfdOptions::default()
        .create("subsecond-patch")
        .map_err(|e| PatchError::AndroidMemfd(format!("Failed to create memfd: {}", e)))?;
    mfd.as_file()
        .set_len(contents.len() as u64)
        .map_err(|e| PatchError::AndroidMemfd(format!("Failed to set memfd length: {}", e)))?;

    let raw_fd = mfd.into_raw_fd();

    let mut map = memmap2::MmapMut::map_mut(raw_fd)
        .map_err(|e| PatchError::AndroidMemfd(format!("Failed to map memfd: {}", e)))?;
    map.copy_from_slice(&contents);
    let map = map
        .make_exec()
        .map_err(|e| PatchError::AndroidMemfd(format!("Failed to make memfd executable: {}", e)))?;

    let filename = c"/subsecond-patch";

    let info = ExtInfo {
        flags: 0x10, // ANDROID_DLEXT_USE_LIBRARY_FD
        reserved_addr: ptr::null(),
        reserved_size: 0,
        relro_fd: 0,
        library_fd: raw_fd,
        library_fd_offset: 0,
        library_namespace: ptr::null(),
    };

    let flags = libloading::os::unix::RTLD_LAZY | libloading::os::unix::RTLD_LOCAL;

    let handle = libloading::os::unix::with_dlerror(
        || {
            let ptr = android_dlopen_ext(filename.as_ptr() as _, flags, &info);
            if ptr.is_null() {
                return None;
            } else {
                return Some(ptr);
            }
        },
        |err| err.to_str().unwrap_or_default().to_string(),
    )
    .map_err(|e| {
        PatchError::AndroidMemfd(format!(
            "android_dlopen_ext failed: {}",
            e.unwrap_or_default()
        ))
    })?;

    let lib = unsafe { libloading::os::unix::Library::from_raw(handle as *mut c_void) };
    let lib: libloading::Library = lib.into();
    Ok(lib)
}

/// A trait that enables types to be hot-patched.
///
/// This trait is only implemented for FnMut types which naturally includes function pointers and
/// closures that can be re-ran. FnOnce closures are currently not supported since the hot-patching
/// system we use implies that the function can be called multiple times.
pub trait HotFunction<Args, Marker> {
    /// The return type of the function.
    type Return;

    /// The real function type. This is meant to be a function pointer.
    /// When we call `call_as_ptr`, we will transmute the function to this type and call it.
    type Real;

    /// Call the HotFunction with the given arguments.
    ///
    /// # Why
    ///
    /// "rust-call" isn't stable, so we wrap the underlying call with our own, giving it a stable vtable entry.
    /// This is more important than it seems since this function becomes "real" and can be hot-patched.
    fn call_it(&mut self, args: Args) -> Self::Return;

    /// Call the HotFunction as if it were a function pointer.
    ///
    /// # Safety
    ///
    /// This is only safe if the underlying type is a function (function pointer or virtual/fat pointer).
    /// Using this will use the JumpTable to find the patched function and call it.
    unsafe fn call_as_ptr(&mut self, _args: Args) -> Self::Return;
}

macro_rules! impl_hot_function {
    (
        $(
            ($marker:ident, $($arg:ident),*)
        ),*
    ) => {
        $(
            /// A marker type for the function.
            /// This is hidden with the intention to seal this trait.
            #[doc(hidden)]
            pub struct $marker;

            impl<T, $($arg,)* R> HotFunction<($($arg,)*), $marker> for T
            where
                T: FnMut($($arg),*) -> R,
            {
                type Return = R;
                type Real = fn($($arg),*) -> R;

                fn call_it(&mut self, args: ($($arg,)*)) -> Self::Return {
                    #[allow(non_snake_case)]
                    let ( $($arg,)* ) = args;
                    self($($arg),*)
                }

                unsafe fn call_as_ptr(&mut self, args: ($($arg,)*)) -> Self::Return {
                    unsafe {
                        if let Some(jump_table) = get_jump_table() {
                            let real = std::mem::transmute_copy::<Self, Self::Real>(&self) as *const ();

                            // Android implements MTE / pointer tagging and we need to preserve the tag.
                            // If we leave the tag, then indexing our jump table will fail and patching won't work (or crash!)
                            // This is only implemented on 64-bit platforms since pointer tagging is not available on 32-bit platforms
                            // In dev, Dioxus disables MTE to work around this issue, but we still handle it anyways.
                            #[cfg(all(target_pointer_width = "64", target_os = "android"))] let nibble  = real as u64 & 0xFF00_0000_0000_0000;
                            #[cfg(all(target_pointer_width = "64", target_os = "android"))] let real    = real as u64 & 0x00FFF_FFF_FFFF_FFFF;

                            #[cfg(target_pointer_width = "64")] let real  = real as u64;

                            // No nibble on 32-bit platforms, but we still need to assume u64 since the host always writes 64-bit addresses
                            #[cfg(target_pointer_width = "32")] let real = real as u64;

                            if let Some(ptr) = jump_table.map.get(&real).cloned() {
                                // Re-apply the nibble - though this might not be required (we aren't calling malloc for a new pointer)
                                #[cfg(all(target_pointer_width = "64", target_os = "android"))] let ptr: u64 = ptr | nibble;

                                #[cfg(target_pointer_width = "64")] let ptr: u64 = ptr;
                                #[cfg(target_pointer_width = "32")] let ptr: u32 = ptr as u32;

                                // Macro-rules requires unpacking the tuple before we call it
                                #[allow(non_snake_case)]
                                let ( $($arg,)* ) = args;


                                #[cfg(target_pointer_width = "64")]
                                type PtrWidth = u64;
                                #[cfg(target_pointer_width = "32")]
                                type PtrWidth = u32;

                                return std::mem::transmute::<PtrWidth, Self::Real>(ptr)($($arg),*);
                            }
                        }

                        self.call_it(args)
                    }
                }
            }
        )*
    };
}

impl_hot_function!(
    (Fn0Marker,),
    (Fn1Marker, A),
    (Fn2Marker, A, B),
    (Fn3Marker, A, B, C),
    (Fn4Marker, A, B, C, D),
    (Fn5Marker, A, B, C, D, E),
    (Fn6Marker, A, B, C, D, E, F),
    (Fn7Marker, A, B, C, D, E, F, G),
    (Fn8Marker, A, B, C, D, E, F, G, H),
    (Fn9Marker, A, B, C, D, E, F, G, H, I)
);